CPP Summertime Festival
CPP Summertime Festival 2018
The Contemporary Performance Practice course completes a series of performances in the Chandler Studio Theatre between the 14th May and the 15th June. The performances are devised by groups from each of the four year groups on the CPP course. The first line of shows were created by the CPP year 3 students - more details can be found on the CPP3 Collobrations 2018 page. The next performances was a choreographed piece created by the second year CPP course - information can be found below. The last group of shows are a collaboration between the final year students and the first year group. The final year students are put in a position to direct the shows and lead the creative flow of the group.
Production Team
Production Management
Initial lead up - Colin Bell
Venue PM - Kev Murray
Stage Management
CPP3 - Kirstie Connel
CPP2 & CPP1/4 - Poppy Apter
Technical Stage Management
Technical Stage Manager - Regan Kelly
Lighting
Lighting and Electrics Mentor - Jazz Hutsby
Lighting Designer CPP3 - Simon McEwan
Lighting Programmer CPP2 & 1/4 - Simon McEwan
Lighting Designer CPP2 & CPP1/4 - Adlai Faigen
Production Electrician CPP3 - Andrew Johnston
Production Electrician CPP2 & CPP1/4 - Heather McKennan
Sound and AV Designer - Callum Farrell
Stage Management
Example of a risk assessment for cast member putting flowers in their mouth -
Technical Stage Management
The TSM Manual was created as a more useful substitute for the generic production manual. The CPP performances needed a different method of planning that was not easy with the common production manual document. **This document is not complete yet as the shows are still in progress**
File:TSM Manual (Not Completed).xlsx
The Ground Plans for all of the CPP theatre configurations were designed in the one Vectorworks project file with multiple design layers and multiple classes for each show.
The first performance required three movable statue plinths which were designed on Vectorworks and built by the TSM:
Lighting CPP 3
Bellow you will find attached the Lighting designs for the CPP 3 By Simon McEwan
[[1]]
[[2]]
[[3]]
[[4]]
Lighting CPP 2
Here is the Lighting Operators Bible for the Cpp 2 Performances [[5]]
here is my overhead LX design for CPP 2 [[6]
here is my side light LX design for CPP 2 [[7]
here are my colour schemes for CPP 2 [[8]
here is my magic sheet for CPP 2 [[9]
Lighting CPP 1/4 group 1
here is my lighting design for CPP 1/4 group 1 [[10]
here is my magic sheet for CPP 1/4 group 1 [[11]
Lighting CPP 1/4 group 2
here is my overhead lighting design for CPP 1/4 group 2 [[12]
here is my side lighting design for CPP 1/4 group 2 [[13]
here is my magic sheet for CPP 1/4 group 2 [[14]
Sound & AV
Risk Assessment
CPP 3 Plans
Group A
Group B
Group C
CPP 2 Plan
CPP 1-4 Plans
Group A
Group B
Group C
Sound
The Sound equipment used for this festival was all in house RCS stock. Here is a Look at some of the kit used.
AV
The Projector used for the festival was borrowed from Edinburgh college as it had an ultra short throw lens which meant that we were able to project a screen size the full height of the wall and only be cut off by performers about 1 meter away from the wall. A Black Magic Ultra Studio Recorder was required to input the live camera feed into Qlab. Here is a look at the kit.
EIKI Powerhouse LC-X6 (6500Lumen)
Black Magic Ultra Studio Recorder
