CPP Summertime Festival

From paperclip
Jump to navigation Jump to search


CPP Summertime Festival 2018

The Contemporary Performance Practice course completes a series of performances in the Chandler Studio Theatre between the 14th May and the 15th June. The performances are devised by groups from each of the four year groups on the CPP course. The first line of shows were created by the CPP year 3 students - more details can be found on the CPP3 Collobrations 2018 page. The next performances was a choreographed piece created by the second year CPP course - information can be found below. The last group of shows are a collaboration between the final year students and the first year group. The final year students are put in a position to direct the shows and lead the creative flow of the group.


Production Team

Production Management

Initial lead up - Colin Bell

Venue PM - Kev Murray

Stage Management

CPP3 - Kirstie Connel

CPP2 & CPP1/4 - Poppy Apter

Technical Stage Management

Technical Stage Manager - Regan Kelly

Lighting

Lighting and Electrics Mentor - Jazz Hutsby

Lighting Designer CPP3 - Simon McEwan

Lighting Programmer CPP2 & 1/4 - Simon McEwan

Lighting Designer CPP2 & CPP1/4 - Adlai Faigen

Production Electrician CPP3 - Andrew Johnston

Production Electrician CPP2 & CPP1/4 - Heather McKennan

Sound and AV Designer - Callum Farrell

Stage Management

Example of a risk assessment for cast member putting flowers in their mouth -

Technical Stage Management

The TSM Manual was created as a more useful substitute for the generic production manual. The CPP performances needed a different method of planning that was not easy with the common production manual document. **This document is not complete yet as the shows are still in progress**

File:TSM Manual (Not Completed).xlsx

The Ground Plans for all of the CPP theatre configurations were designed in the one Vectorworks project file with multiple design layers and multiple classes for each show.


The first performance required three movable statue plinths which were designed on Vectorworks and built by the TSM:

Lighting CPP 3

[[1]]