Chain Hoists: Difference between revisions
SMacluskie (talk | contribs) No edit summary |
SMacluskie (talk | contribs) No edit summary |
||
| Line 3: | Line 3: | ||
Standard rigging hoists to the BGV D8 specification or a standard hoist meeting the BS 7906-1 Category B may be used for static suspension of loads, however it is essential to have a secondary suspension via safety steel, inertia reel or load arrestor. These include the Lodestars, LoadGuards and ProStars | Standard rigging hoists to the BGV D8 specification or a standard hoist meeting the BS 7906-1 Category B may be used for static suspension of loads, however it is essential to have a secondary suspension via safety steel, inertia reel or load arrestor. These include the Lodestars, LoadGuards and ProStars | ||
[[File:Rigging-Hoist-Standards-Explained-Table-3.jpg]] | [[File:Rigging-Hoist-Standards-Explained-Table-3.jpg | 400px]] | ||
Revision as of 11:24, 13 April 2022
LEGAL REQUIREMENTS
Standard rigging hoists to the BGV D8 specification or a standard hoist meeting the BS 7906-1 Category B may be used for static suspension of loads, however it is essential to have a secondary suspension via safety steel, inertia reel or load arrestor. These include the Lodestars, LoadGuards and ProStars
Stock
For Kinesys kit see the Kinesys page
2 x Model F CM Lodestar Chain Hoists
Single Phase SWL 500kg Chain Hoists
- Stored in flightcase in dock
F 1/2 Ton – 500kg
4.06m per minute - lift speed
1/2 (.37kW) - Horse power
4 x Prostar Chain Hoists
Single phase 225kg SWL
Stevenson Hall only
6 x LoadGuard LG50 Chain Hoists
Single Phase SWL 500kg Chain Hoists
4m/min speed
For use in any venue
Pack the flightcase like this
Guardian 6 Channel Remote Single Phase Controller
with 15m remote hand set with hoist control toggle
Manuals Below