Ballet Showcase 2017

Ballet Showcase
Production	Ballet Showcase 2017
Performance Time
Performance Dates	Thursday June 8 2017 - Saturday June 10 2017
Stats
Venue	New Athenaeum Theatre
Creative Team
Lighting Designer	Ross McCrone
Sound Designer	Maciej Kopka
Production Team
Production Manager	Lynfryn MacKenzie
Stage Manager	Kirstie Connel
DSM	Laurie Sutton
TSM	Yesha Subotincic West
DTSM	Reece Flynn
Head of Flys	Heather McKennan
Sound Operator	Jak Coventry
PLX	Gary Ashbridge
DPLX	Adelaide Harney
LX Crew	Rachael Matthews

Production Team

Stage Management

For this year's Ballet Showcase there were a number of props that needed to be sourced. These included 8 wooden chairs, 21 white chairs and a small round table with a red phone.

File:Mater Setting List Ballet Showcase.docx

Telephone and Round Table

For the telephone the chorographer wanted the phone cord to be very long and also to be white so I had to make some adjustments to the phone in order to meet these requests.

Step One

I first removed the old phone cord from the phone and replaced it with a headphone accessory set cable for use in rehearsals.

File:IMG 2794.jpg

Step Two

Once there was a break in the Matthew Robinson rehearsals, I removed the cord again and used methylated spirits to take off the lacquer the phone cord in order for the paint to adhere better to the cord.

Step Three

I then used a white primer spray paint to paint the cord white. I did about 5 coats in total to give it a solid white colour. I then left the cord to dry overnight.

Step Four

I then reattached the cord to the phone.

Step Five

I then attached the phone to the table at first using Velcro which did not stick well to the table so in the end I used a hot glue gun which made the phone secure to the table. Eventually my ASM had to screw the phone to the table as the hot glue was not strong enough.

Technical Stage Management

The Team

• 
  Technical Stage Manager - Yesha Subotincic West
• 
  Deputy Technical Stage Manager - Reece Flynn
• 
  Head of Flys - Heather McKennan

Plan

In the Ballet this year there was a large amount of flying cloths. There was the BP, a black gauze, upstage full black, a star cloth (borrowed from Scottish Opera), a downstage full black and house tabs. The Star Cloth was 15m wide with an 8m drop. It was fiberoptic so to avoid harming the cables by folding it back on a bar and it was flown on HV30 Truss in stock and 2 automation points (winch 3+1).

Find below a copy of the ground plan and the get in plan used by TSM.

Risk Assessment

All RA's necessary for this show were generic. All those that did not already exist can be found below along with corresponding SSOW.

Floor

Information on the floor used on the show can be found on the page Dance Floor. The floor was cut to the dip traps and around the tormenters leaving a 50mm gap upstage. The following layout and organization can be found on the page Dance Floor.

The floor was then cut at the dip traps to match the stage The cleaning process used on the show is as follows:

There are 4 types of cleaning to be done on the dance floor. There is:

Dry Mop

Wet Mop/Towel

Water + Meths Mop

Cleaner Mop

The frequency and order of these cleaning processes are shown below on the Cleaning Schedule.

The head of flys was Heather McKennan. Find below the Counterweight fly plot and help fly plot os the Ballet

File:TSM Paperwork Ballet 2017 V5.pdf