Steel Deck: Difference between revisions
Jump to navigation
Jump to search
SMacluskie (talk | contribs) No edit summary |
SMacluskie (talk | contribs) No edit summary |
||
| Line 11: | Line 11: | ||
<pdf>Unit-weights.pdf</pdf> | <pdf>Unit-weights.pdf</pdf> | ||
<pdf>Maltbury_steeldeck_7.5.pdf</pdf> | <pdf>Maltbury_steeldeck_7.5.pdf</pdf> | ||
| Line 19: | Line 17: | ||
<pdf>Steeldeck_safetymanual.pdf</pdf> | <pdf>Steeldeck_safetymanual.pdf</pdf> | ||
Should a box need to be made for the US corner of the pit (ie where the pit lift meets the front of the stage), the angle at the inside corner is approximately 81 degrees. TVD '11 | |||
Revision as of 14:35, 25 September 2013
Here is a list of the RCS steel deck stock, correct as of 22 July 2010
- 2440 x 1220 (8'x4') = 20 available
- 1220 x 1220 (4'x4') = 6
- 2440 x 610 (8'x2') = 6
- 1220 x 610 (4'x2') = 2
- 915 x 610 (3'x2') = 1
Below is a link to Steeldeck's approved methods of assembly, as well as information about bracing on steeldeck at height
Should a box need to be made for the US corner of the pit (ie where the pit lift meets the front of the stage), the angle at the inside corner is approximately 81 degrees. TVD '11