Cymbeline 2019

Cymbeline 2019
Summary
Dates 6th February - 9th February 2019
Performance Course Second Year BA Acting
Location Chandler Studio Theatre
Creative Team
Director Peter Collins
Assistant Director Edward Soper
Fight Director Raymond Short
Designer Laura McCartney
Sound Designer Meirian Hall-Jones
Lighting Designer Simon McEwan
Production Team
Stage Manager Fiona Elliott
Deputy Stage Manager Dale Gibb
Assistant Stage Manager Rehearsals Ruby Noble
Assistant Stage Manager Rehearsals Ewan Sullivan
Assistant Stage Manager Rehearsals Ryan Worrell
Assistant Stage Manager Madeline Hanton
Assistant Stage Manager Jessica McKay
Stage Supervisor Sean Ramsay
Stage Supervisor Lewis Douglas
Production Electrician Peter Goddard
Deputy Production Electrician Joshua Brown
LX Programmer Andrew Lynch
Stage LX Jamie Murray
Sound No.2/Operator Danielle Waldman

Cast

Cymbeline - Alana Jackson

The Duke/ British Soldier - John Whittle

Imogen - Shyvonne Ahmmad

Postumus - Sam Stopford

Cloten / British Soldier - Adam Parkinson

Cornelious / Roman Captain - Calvin Noble

Helen / Caius Lucius - Natalie Mitson

British Lord/ Roman Gentlemen/ Guiderius - Ian Sawan

British Lady/ Arviragus - Lesly Lemon

Pisanio - Yingxue Zhang

Ianchimo - Tom Zachar

Court Musician/ Belarious - McCallister Selva

Stage Management

x

Technical Stage Management

File:Ground plan.pdf

Silk Drops

We had 5 silk reveals during this production and these unrolled down from the catwalks and then were ripped down by a member of cast. To do the unroll we used a pin and half a pin hinge so that when the pin was removed the silk would fall. Pieces of sash were used to wrap around the silk to hold them up with a bowline tied in the end so that it could link into the hinge. To make it easy for cast to rip down the tops of these were velcroed on the scaffholding bars at the top with three small pieces of velcro.

Lighting

As an electrics team we had a fairly bumpy ride during the fit up & tech period, having to solve many issues along the way. Notable technical challenges we encountered were having to light underneath the wooden pallet formation onstage, lighting inside the "trunk" set piece, and finally assembling a makeshift extension for the smoke machine to run underneath the aforementioned pallet formation.

To light underneath the pallets we were going to have to run extensions from the floor dimmers, along the back wall and then eventually, run the csble through sand, underneath the pallets where the birdies would be situated. We borrowed some Soca from the Athenaeum to run to the pallets, there the fan outs would each be grelcoed, then extended to the birdies as required. This worked with minimal interference from the sand on the floor, and to our surprise they didn't require much maintenance post get out.

(trunk)

The largest challenge however was building the smoke machine extension- this ended up being cut as our final product u fortunately couldn't deliver the desired effect. Our task was to build a box around the smoke machine, then creating a suitable funnel system to attach to the end of the smoke machine. Attaching a 12v 40x40mm fan onto the end of a scaff pole coming out of the box structure, which was then attached to hosepipe, which had 4mm holes drilled interspersed down the length. The total length of piping from the back wall had to run 11.6 metres in total, round two corners. It was an ambitious attempt, but after failing to deliver the effect required, the smoke machine moved position and the extension tubing was cut.

Sound

File:Cymbeline speaker plot.pdf