Scaffold Projector Tower: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:Production Projects]] | [[Category:Production Projects]] | ||
==About The Project== | |||
The production [[Jekyll and Hyde]] required the building of a scaffold projector tower. [[Matthew Turnbull]], [[Rachel Wells]] and [[Gary Ashbridge]] worked in conjunction to produce the tower, and [[Ryan Greenfield]] and [[Neil Smith]] altered it to meet the demands of the production. | The production [[Jekyll and Hyde]] required the building of a scaffold projector tower. [[Matthew Turnbull]], [[Rachel Wells]] and [[Gary Ashbridge]] worked in conjunction to produce the tower, and [[Ryan Greenfield]] and [[Neil Smith]] altered it to meet the demands of the production. | ||
===Photos=== | |||
===Measurements=== | |||
The lower shelf of the tower was 500mm from the floor and the upper shelf was 500mm above the lower. This was to allow room for focusing the projectors. | |||
===Alterations=== | |||
The tower was altered to allow a single projector to be hung, instead of resting on a shelf, to allow easier focusing and to reduce the chance of the projector getting knocked out of alignment. | |||
Revision as of 14:11, 9 November 2015
About The Project
The production Jekyll and Hyde required the building of a scaffold projector tower. Matthew Turnbull, Rachel Wells and Gary Ashbridge worked in conjunction to produce the tower, and Ryan Greenfield and Neil Smith altered it to meet the demands of the production.
Photos
Measurements
The lower shelf of the tower was 500mm from the floor and the upper shelf was 500mm above the lower. This was to allow room for focusing the projectors.
Alterations
The tower was altered to allow a single projector to be hung, instead of resting on a shelf, to allow easier focusing and to reduce the chance of the projector getting knocked out of alignment.