Glory on Earth 2023: Difference between revisions

From paperclip
Jump to navigation Jump to search
No edit summary
Line 83: Line 83:


There was 4 set elements in this show, the first was the "Pulpit". This was made by construction to replicate an old church pulpit, it was created in two parts for transportation reasons. Above the pulpit was the "Corbals" these were old church pillars from reset scenery that the designer wanted to be flown upside down. To do this I drilled a 10.5mm hole through the body of the coral and put a M10 120mm bolt through and then a half doughty coupler on the end of this, then attached them all onto a scarf pipe from the catwalks.
There was 4 set elements in this show, the first was the "Pulpit". This was made by construction to replicate an old church pulpit, it was created in two parts for transportation reasons. Above the pulpit was the "Corbals" these were old church pillars from reset scenery that the designer wanted to be flown upside down. To do this I drilled a 10.5mm hole through the body of the coral and put a M10 120mm bolt through and then a half doughty coupler on the end of this, then attached them all onto a scarf pipe from the catwalks.
The "Dais" was a 4 tier platform with 200mm steps to each tier.

Revision as of 09:50, 7 November 2023



Glory on Earth
Summary
Performance Dates
XXX
Performance Course
XXX
Location
Chandler Studio Theatre
Creative Team
Director
XXX
Set and Costume Designer
XXX
Lighting Designer
XXX]
Sound Designer
Lana Kirk
Production Team
Production Manager
XXX
Stage Manager
XXX
Deputy Stage Manager
XXX
Production Electrician
XXX
Lighting Programmer
Production Sound Engineer
Stage Supervisor
AV Designer
XXX

Overview

Sound

Sound Design

Plans and Equipment

IO List

Kit List

Cable Plan


TSD

Overview

"Glory one Earth" was a relatively simple design for the chandler. It was staged in traverse with 4 banks of seating made from 2 heights of Steel deck. The Designer wanted masking right round the venue to give the audience a feeling of being enclosed and more immersed inn the drama. To do this we used the in house tab track to mask off sides behind the seating banks as well as the upstage wall. To cover the main in house seating bank we used 11 metres worth of scaff and a 13x4.5 metre border flown to the same height as the tab track. To create the upstage crossover I used 12 metres of scarf then to make the centre gap I had to use two 16x5 borders. this gave a lot of horizontal excess so required a lot of folding back but was the only cloth that was wide enough with enough drop.

There was 4 set elements in this show, the first was the "Pulpit". This was made by construction to replicate an old church pulpit, it was created in two parts for transportation reasons. Above the pulpit was the "Corbals" these were old church pillars from reset scenery that the designer wanted to be flown upside down. To do this I drilled a 10.5mm hole through the body of the coral and put a M10 120mm bolt through and then a half doughty coupler on the end of this, then attached them all onto a scarf pipe from the catwalks.

The "Dais" was a 4 tier platform with 200mm steps to each tier.