Snow Queen

Snow Queen
Snow Queen
Summary
Dates	8th - 16th December 2016
Performance Course	Third Year BA Acting
Location	New Atheneum Theatre
Creative
Director	Douglas Irvine
Designer	Robin Peoples
Sound Designer	Calum Paterson
Lighting Designer	Kieran Kenning
Production Team
Stage Manager	Miranda Stewart
Deputy Stage Manager	Valentino Fabbreschi
Assistant Stage Manager	Rebecca Bell
Assistant Stage Manager	Louise Charity
Technical Stage Manager	Stuart Leech
Head Flyman	Yesha Subotincic West
Deputy Technical Stage Manager	Dimitri Grant
Production Electrician	Matthew Turnbull
Deputy Production Electrician	Euan Odd
Lighting Programmer	Gary Ashbridge
Technical Crew
Popy Apter
Dylan Hodgson
Allan Hamilton
Ross Brodie
Jak Coventry
Karyn Wilson
Craig Stevenson
Regan Kelly
Andrew Johnstone
James Hamilton
Adlai Faigen

The Snow Queen

A fun, thrilling and magical adaptation of Hans Christian Andersen’s wintery tale. The Snow Queen has cast a spell on Kay - freezing his heart and stealing him away to her Ice Palace - all part of her wicked plan to turn the world into winter. But young Gerda has different ideas and undertakes a daring quest to rescue both Kay and the world from the Snow Queen’s icy grip.

Royal Conservatoire of Scotland

Stage Management

The Team

Fire

After discussions with the director and designer, the following parameters were determined for the fire;

- It needed to be at least the width of the trap (700mm) - It needed to be in a container that looked like it was carried around by The Robber Girl for the purpose of creating fire - It needed to burn for the length of the scene it featured in - around 7 minutes - It needed to be tall enough that it looked like a small campfire - It needed to be able to both light and extinguish instantly

A number of different options were looked into for the fire - initially flame paste] was considered but due to the number of shows, the width of the fire and the length of time the fire needed to burn for, it was quickly decided this option was too expensive.

Following this, we purchased fuel tablets]. They seemed like a good option as they are designed for starting campfires, they do not liquefy when burning and they (in theory) light easily. Unfortunately, when tested, they provided a very small flame - only a couple of inches tall, and only the width of the tablet. A demonstration of the fuel tablets can be found here] (with the wind helping the flame along quite a lot). This was not anywhere close to the desired effect and we quickly realised we would need to come up with a new method.

Stage Department

The Team

The Technical Stage Department team consisted of;

Stuart Leech (Head of Stage) Dimitri Grant (Depute Head of Stage)

Yesha Subontincic West (Head of Flys) First Years (Crew)

Tracking, Trees, Trucks & Carts

The House

The Castle

The Tree's

The Cart

The Throne

This is the end

Genie Trap

https://www.youtube.com/watch?v=lGMRda7e02I

Counter Weight Plinth

https://www.youtube.com/watch?v=rhyfHs7SbNM

Vectorworks Project Sharing

In the early design process of Snow Queen the stage department discussed an idea of using a sharing based platform which would allow multiple user to feed into a single Vectorworks file. Initially we discussed sharing a single file on a cloud based server, however this was quickly ruled out due to multiple issues around access and version numbers.

We began to look at Vectorworks Project Sharing.

This feature allows users who have permission to access the file in the cloud (in our case Dropbox) to simultaneously edit different aspects of the same drawing. Different permission levels are granted by the administrator of the shared file, in turn allowing different users to edit different things.

By default, when the Project File: Snow_Queen_Master.vwxp, you will see that the file that actually opens on your computer is Snow_Queen_Master_yourusername.vwxw. This file is your Working File and is to be stored locally on your machine. It is where you are to make all changes and edits. As an added level of security the default permission for any user opening the Project File for the first time is ‘Read Only.’ Once the user has saved the Working File locally on their machine the administrator can edit the permission of that user to the appropriate one and then the user can begin editing.

The way Project Sharing in Vectorworks 2017 works is that each user can check-out one or multiple layers and edit them. When these layers are checked-out only the user that has checked them out can edit them. When the user wants to make the changes visible to others in the shared Project File, they need to Save and Commit their changes. This is done by going to File- Save and Commit. The user still has the layer or layers checked out. To release the layers, go to File- Close and Release.

IMPORTANT: If you have not Saved and Committed before Closing and Releasing, changes will not be saved, you will lose all work. Closing and releasing also closes the file.

More information can be found on the Vectorworks Project Sharing page: http://www.vectorworks.net/products/features/project-sharing

Snow Drop

The Snow drop was built for The Snow Queen the 2016 christmas show. It required snow to fall across the span of the Ath stage for a couple minutes. the budget did not stretch to hire proper snow drops and we could not use "bubble snow" due to the floor and set not being able to take it. The idea was to build a snow roller using plastic pipe in workshop. This project was taken on by Stuart Leech TSM, Dimitri Grant DTSM and Yesha Subotincic West Head of Flys.

The Drop was too heavy to move smoothly from Fly Floor so the lines were instead to a counterweight bar (bar 14) with 5 weights in the cradle. The operation was therefore done by moving a bar in and out rather than pulling hemp lines.

After the end of the tech the roller was switched out for a snow bag with the same rig and operation. The reason for this being that the time did not exist to perfect the snow fall from the roller. Given more time the roller would have been used.

Further Information information regarding the Snow Drop can be found here Snow Drop.

Automation

Similar to Dick McWhittington and The Neil Smith, Single Winch, Dual Lift Ladder Divert System™ Snow Queen required lighting ladders to move in show for truck to go on and off stage.

In times of old The Great Warlock Himself, Neil McDowell Frodo Skywalker Smith, wielded the great and awesome powers of ascension to bring light to the stage of Panto. Like the gilded war heroes before them a new generation of warriors set out to follow and albeit different path to shine light upon a dark and troubled world. They opted for the upstage ladders (hung off truss) to be suspended above the abyss of what is the New Atheneum Stage by not 1, not 3 but 2 automation points. Each span of truss was a 3m section and a 1m section. Stage right used automation winches 2 and 4 and stage left used points 1 and 3. To monitor the oppressing weight of darkness and lights hanging on the truss, each automation line also had Elven made load cells attached.

Looketh below and find the scroll that shows the states of automation used in this Great Show.

---

Lighting

Title Of Something

And Some Information

Lalala

Sound

Title Of Something

And Some Information

Lalala

Design

Title Of Something

And Some Information

Lalala

Photos

A selection of photos of the build and production period of Snow Queen

Further photos can be found on...

RCS Flickr]

Scenic Social Media]

Workshop Social Media]