Inner Space 2014

Inner Space 2014
Inner Space 2014 - Between 2 Wings
Performance Time
Performance Date	Thursday 30 January 2014
Performance Time	6:30pm
Stats
Venue	New Athenaeum
Creative Team
Designer	Ryan Greenfield, Daniel Thompson
Lighting Designers	Ryan Greenfield, Alex Kilgour, Bradley Jones
Sound Designer	Hannah Allan
Content/Video Designer	Rory Boyd
Production Team
PRODUCTION MANAGER	Ross Pringle
Stage Manager	Amy Donaldson
DSM	Astrid Rothmeier
ASM	Judy Stewart, Riona Gilliland, Kiri Newbery
TSM	Daniel Thompson
DTSM/Head Flys	Sean Quinn
DTSM	Samantha Wright, Rory Boyd, Alex Kilgour, Robert Gear
PLX	Stephen Cunningham
DPLX/Programmer	Neil Smith
DPLX	Laura Mason
Sound Operator	John McAdie
Production Arts	Alex Kilgour
PR/Marketing	Rory Boyd

About

Inner Space 2014, otherwise known as Between 2 Wings, was a project done by first year PTM students in January 2014.

TSM

From a TSM point of view this was a fairly quiet show, however the quantity of LX cabling created a problem in calculating weights accurately, so these were modified.

Fire exit signs were hung above the entrances from the fly floors.

The full black masking the Safety Curtain has to be spun 180° so the dressed side faced the audience.

The major challenge was the side masking, as it had to fit perfectly, but also provide suitable fire exits. These were hung from scaff bars, and flown on hemp lines from points in the grid.

A "tightrope" was rigged CS using a single hemp line. This was not an active piece of set.

The balloon bar was created by suspending a 6500mm scaff bar from DPCW14 on (3x) 6000mm drifts, rigged so as to fly in DS of the performance area, and to avoid the band area.

Ground Plan

Overhead Previs

Fly Plot

Adjustments were made to weights depending on the preference of the flyman.

Equipment

Masking

Soft

16m x 8m Cyclorama

(2x) 16m x 8m Full Black

16m x 5m Border

(3x) 4m x 8m Leg

8m x 8m Half Tab

Hard

(2x)2400mm x 6000mm Hard Maskers

Scaff Bars

4000mm - LX

8000mm – SL Masking

(3x) 3000mm – SR Masking

6500mm - Balloons

Rigging

(4x) 4000mm Double Ended Drifts - Fire Exit Signs

(2x) 5000mm Drifts - Projector Screen

(3x) 6000mm Double Ended Drifts – Balloon Bar

(6x) Barrel Clamp – Balloon Bar

(6x) Small Strop/Sling – Projection Screen and Fire Exit Signs

(8x) Bow Shackle (3/4t or 1t) – Fire Exit Signs

(12x) Hemp Lines

Triple E Track and Scenery Runners

Stage Braces

Stage Weights

LX Design

Boom Plan

Electrics/Video

The LX rig was primary rigged on the Tuesday, but due to the extent and size of the rig, LX rigging and focussing continued well into Wednesday.

LX Rig

The electrics rig was fairly straightforward, the only complexity being the size of the rig. During rigging, the DMX line on LX 4 had to be swapped out as it failed to function. Also during the rig it was decided that the US Band boom with the S4 Pars and the onstage set up lighters were not necessary and were therefore cut.

Equipment

*This equipment list does not account for the booms and on stage floor package being cut*

The bars were wired with a selection of IWB's and Socapex tails. Additionally on LX 4, an IWB that was believed to have 10 working circuits only had 9. Therefore there was an additional piece of 15A TRS ran to Prompt Side Flys.

Video Rig

Video on this show was an integral component. There were two main video areas, the main screen content and the onstage scores.

Equipment

2x Macbook Pro (running Resolume Arena 4.1.6)
2x Windows PC (running Microsoft Powerpoint)
1x Sanyo 5k Projector (with Bar Mount)
4x Computer Monitor (Sourced from Ath Control Room)
4x Long VGA Cable
2x Medium VGA Cable

Onstage Video

The onstage scores, were very simple in their operation. Two laptops sat backstage and the score boards were simply power points with 100 slides with numbers on them, allowing for up to 100 points (even though we only reached 17 in the show). The two laptops were operated by the Stage Management Team.

Main Screen

The Main screen content was slightly more complicated. The content was loaded on to two laptops running [Resolume Arena].
We needed the contestants on stage to see what was on the main screen without turning around. The original idea was to use multiple VGA splitters and run the content from only one server with the other one being a backup. However, we could only source one VGA splitter from the AV stores. The solution was to run one server as the source for the main screen, and another as the source for the stage. These were then loaded with the same content and given the same Artnet control, meaning they were identical copies of each other.

Control

Control on this project was provided by a GrandMA Fullsize. The project ran over 4 universes:

Universe 1 - In-House Dimming - This was connected by using the DMX patches on the DSR Facilities box to the control room. (Adaptors were needed on both ends as these are DMX sends from the control room.)
Universe 2 - Overhead DMX - This was connected by using the Ethernet patches on the DSR Facilities box to the control room. DMX to Cat5 jumps were used at each end.
Universe 3 - Floor Package DMX - This was simply a long DMX ran along the iron behind the full black. This then went a DMX splitter DSL, which provided individual DMX lines to each boom or floor fixtures.
Universe 10 - Media Servers - This universe was outputted over Artnet on subnet 0, ports 0 and 1. This controlled the Media servers.


The following is a network diagram of how the system was built, and a view of the control position itself:

Sound

Equipment List

Control

LS9
Macbook running Qlab for SFX

Panel

2 x boundary mics
1 x Shure SM58

Band

Keyboard – DI’d
Kit – kick AKG D112, toms and snare Sennheiser e604’s
Guitar – Amp DI’d
Bass – Sennheiser e906
Vox – Shure SM58
Trumpet – No mic

Speakers

4 x D&B E3 – flown on bars 2 and 22
2 x D&B E9 – Band PA
4 x D&B Max 15 - Band monitors
2 x D&B C7 – Band PA subs

Amplifiers

2 Epacs for band set up
2 D&B D6 for overheads powered from Ath control room

Sound Effects

All the effects used throughout the performance were either recorded or sourced from online sites such as televisiontunes.com and freesound.org and were cued and played through QLab. The house music was current chart music played through Spotify (nothing fancy).

Recorded

For the team’s buzzers we recorded Stephen Cunningham shouting “Hold Please” (for Sue’s team) and “Cut… No it’s all wrong” (for Hugh’s team). For the beginning of the show there was a recording of Sean Quinn announcing the show title and welcoming the audience to the performance.

Sourced

30 second timer (Countdown)
Heartbeat (Who Wants To Be A Millionaire)
“Shoobedodoo” (Who Wants To Be A Millionaire)

The Buzzers

There were three main problems that needed to be addressed when creating the buzzer systems; The Physical Button, the mechanism, and the software that controlled them.

The Physical Button

I looked at many ways to get the buzzers to work. One of the problems is that we wanted them to be 'smackable' and something that was not going to break when whacked. I decided the best solution to this was to make them out of plastic.

They were 3D printed in parts on a Makerbot Replicator 2. Each took around 4 hours to print in total, and comprised of 4 parts. They were made from PLA plastic, and had a 10% infill.

Gallery

Thanks

Thanks goes out to the following people for their continued help in this project: