Chandler: Difference between revisions

From paperclip
Jump to navigation Jump to search
Rlyons (talk | contribs)
No edit summary
Krobertson (talk | contribs)
 
(114 intermediate revisions by 14 users not shown)
Line 1: Line 1:
== All lanterns are supplied in working order with hook clamps, wing nuts and safety chains/ bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received ==
<b> All lanterns are supplied in working order with hook clamps, wing nuts and safety bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults or damages to the Venues Team. <br> All lanterns have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show. </b>


== Moving Heads ==
<br>'''Martin MAC TW1'''<br>
'' The MAC TW1 is a powerful, silent tungsten wash light with a clean, even, soft-edged beam, a motorized zoom, rich CMY color mixing and both internal and external electronic dimming. Weighs 27kg''<br>
[[Image: Martin MAC TW1.jpg| 200px]]
'''3 in stock. 1 in repair'''Contact Venues Team to ensure availability. Available for use elsewhere if not required in the Chandler. '''


== Profiles ==
== Profiles ==


ETC S4 jr Zoom 575w 25/50 <br>
ETC S4 jr Zoom 575w 25°/50° <br>
Weighs 4.5kg
Weighs 4.5kg <br>
[[Image:S4jnr2550.jpg|250px]]'''''16'''''
All S4's have a safety bond attached <br>
'''13 Complete with bonded colour frames'''<br>
'''3 with missing colour frames'''<br>
'''5 with broken/damaged colour frames'''<br>


Strand SL 19 600w 19 <br>
[[Image:S4jnr2550.jpg|250px]]'''''21 in stock'''
Weighs 6.8kg
[[Image:StrandSL.jpeg‎]]'''''8'''''


== Fresnels ==
== Fresnels ==
Selecon Acclaim F 650w 6/60 <br>
Selecon Acclaim F 650w /60° <br>
Weighs 3.3kg
Weighs 3.3kg <br>
[[Image:SeleconAcclaim.jpeg‎]]'''''23'''''
All Acclaim F's have a safety bond attached <br>
'''6 complete with Barndoors and Colour Frame'''<br>
'''1 with missing barn doors'''<br>
'''14 with missing colour frames'''<br>
'''3 with damaged barn doors'''<br>
[[Image:SeleconAcclaim.jpeg|350px‎]]'''''24 in stock '''''


== PCs ==
== PCs ==
Selecon Acclaim PC 650w 4/64 <br>
Selecon Acclaim PC 650w /64° <br>
Weighs 2.8kg
Weighs 2.8kg <br>
[[Image:SeleconAcclaim2.jpeg‎ ]] '''''26'''''
All Acclaim PC's have a safety bond attached <br>
'''5 complete with Barndoors and Colour Frame'''<br>
'''4 with missing barndoors.'''<br>
'''14 missing colour frames.'''<br>
'''3 with broken/damaged colour frames.'''<br>
[[Image:SeleconAcclaim2.jpeg‎|100px]] '''''26 in stock'''''


== Beamlights ==
== Beamlights ==
Parcan (PAR 64) 1000w various lens options <br>PLEASE NOTE - We have a variety of PAR 64 lamps - we may not have all of the same lamps that you require for your show.
<br>
Weighs around 2kg (depends on lantern)
[[Image:Par64.jpeg‎ ]]'''''20'''''


== floods ==
ETC S4 PAR 750w <br>
'''12 S4 PAR EA - Weighs 3.4kg'''<br>
'''10 complete with Colour Frame'''<br>
'''1 with missing Colour Frame.'''<br>
 
'''1 S4 PARNel - Weighs 3.6kg'''<br>
'''1 complete with Colour Frame'''<br>
 
[[Image:ETCSource4Par.jpeg‎|200px ]]    '''''13 in stock'''''
 
== Floods ==
Strand Coda 4 500w  <br>
Strand Coda 4 500w  <br>
Weighs 11kg
Weighs 11kg
[[Image:Coda4X500.jpeg‎ ]]'''''8'''''
 
[[Image:Coda4X500.jpeg‎ ]]     '''''4 in stock'''''
 
== Moving Lights ==
 
Robe DL4F LED 450W <br>
RGBW LED color engine
15-50 degree zoom
weight: 20.8 KG (45 lBs)
 
https://www.robe.cz/dl4f-wash/
 
[[Image:Dl4f.jpg|100px]]    '''''3 in stock 1 is out for repair at ROBE'''''
 
== Hazers and Smoke Machines ==
<BR> '''THESE UNITS ARE NOT SPECIFIC TO THE VENUE AND ARE GENERAL STOCK - ENSURE YOU BOOK THE CORRECT UNIT FOR YOUR SHOW!'''
<br>
<br>
'''Look Solutions Viper 2.6 Fog Machine'''<br>
The Viper 2.6 is a 230 Volt, 2600 Watt high performance fog machine.
<BR>The output is twice as powerful as the Viper NT. It has a built-in timer and DMX. Heat-up time is approximately 7 minutes.
<BR>Pump can be adjusted in increments of 1%-99%.
<BR>Continuous output when pump is set <50% and settings above 50% will yield a 40 second blast.
<br>
[[File:viper.jpg]]'''2 in stock shared with all venues'''
<br>
<br>
 
 
'''Look Solutions Unique 2.1 Haze Machine'''<br>
The Unique 2.1 is one of the most popular professional hazers in the world. Ideal for highlighting and supporting light and laser effects.
<BR>Minimal warm up time of only 60 seconds
<BR>Minimal noise
<BR>Pump and fan adjustable separately in 99 steps, therefore variable output (from the finest mist to a thick haze, similar to fog)
<BR>Internal fan ensures quick and homogen distribution
<BR>DMX as standard, analog (0-10V) and stand-alone running
<BR>Control of the pump, fan and the adjusting of the DMX start address is achieved with buttons
<BR>Internal Timer
<BR>Haze-Density Control System
<BR>Minimal fluid consumption (2l canister guarantees up to 50 hours continuous output)<BR>
 
 
[[File:Unique_Hazer.jpg|300px]]
'''1 in stock shared with all venues'''
 
<BR>
<BR>
'''Smoke Factory Tour Hazer 2 '''
<BR>The perfect haze machine: creates a fine haze for your own ‘Designer Mist’ - high output haze and inbuilt fan
<BR>Power: 1500 W
<BR>Fluid consumption: 5 litres, 120 hours at 50% output
<BR>Control options: DMX 512 + stand alone, timer
<BR>Hazemaker based on vaporising for generator.
<BR>
[[File:Smoke-factory-tour-hazer-2.jpg|300px]]
'''1 in stock shared with all venues'''


== Control ==
== Control ==


Strand 530i (c/w 2x Monitors)
'''ETC Eos Ti With one Multi Touch Displays'''<br>
[[Image:Strand 530i.jpg|200px|]] <br>
[[File:Ti.jpg|1000px]]<br>
Product Features<br>
•10,000 channels (devices)<br>
•4,096 outputs/parameters<br>
•Dedicated master playback fader pair<br>
•10 definable motorized faders, with 30 pages of control<br>
•20 user-definable buttons<br>
•999 cue lists<br>
•200 active playbacks<br>
•300 submasters<br>
•Dedicated pan/tilt encoders, four pageable encoders<br>
•Two articulating 17” LCD multitouch displays<br>
•Supports three external DVI/SVGA monitors; can be single- or multitouch<br>
•High-density live and blind displays<br>
•Virtual Media Server Control with Stock Content (user images may be imported)<br>
•Device discovery and troubleshooting via RDM<br>
•ETC Sensor® CEM+, CEM3™ and FDX dimmer feedback and controls<br>
•User-definable channel and control layouts<br>
•ETCNet3™ (ACN based), ETCNet2™, Artnet and Avab® UPD protocol output<br>
•Integrated keyboard drawer with USB ports<br>
•Two individually configurable network ports<br>
•Backlit keyboard<br>
•Multiple MIDI and SMPTE Inputs
•Client/server networking and synchronized backup
•Client and Offline programming on PC (Windows 7 or XP) and native on Macintosh (Intel only, OS X)
•Data-laundering from Obsession™, Express™, Expression®, Emphasis®, Congo®, Transtechnik NT, Avab VLC and Strand 500/300 series show files via ASCII
•12 discrete online users with partitioned control
•Two 802.af-compliant PSE Ethernet ports, individually configurable
 
 
 
 
 
 
Houselights are addressed to dimmer 126. There is also a chilli system in place. Workers are controlled from the DSR Breaker board.
 
== 15A TRS ==
 
[[File:15A.jpg]]
 
Colouring Convention: R E D 3 letters = 3 meters etc.
 
1m WHITE
 
2m WHITE (2 stripes)
 
3m RED
 
4m BLUE
5m GREEN
 
6m PURPLE
 
10m YELLOW
 
 
== Dimmers and Hot Power ==
 
The Chandler is equipped with 72 ways of Zero 88 Chilli Pro 24-10i dimmers. Each dimmer channel has a 10Amp capacity. There is a plan below showing the locations of these dimmers. The Chandler also has 8 ways of DMX switched hot power. Again these are marked on the plan. An additional 6 dimmer outlets are located at the stage floor level towards the dock doors. These are numbered 57 through 62. A 6 way 15amp outlet panel is located above the vestibule exit door beside the Dock Door entrance. This has a permanent link of socapex cable to the the floor sockets numbered 57 through 62. The socapex cable will require a 15a plug spider if the panel outside the venue need to be utilised.
 
<pdf>Chandler-2019_-_Overhead_Dimmer_Outlets_-_A3.pdf</pdf>
 
 
== Rigging Positions ==


The Chandler has pre allocated cross bars primarily to act as lighting rigging positions but to be shared for the rigging of suspended set items etc. The default layout is shown below:


Check with venues team/PLX Lecturer/Other PLXs
<pdf>Chandler_Crossbars_Doc.pdf</pdf>


Houselights are on channels 301 through 303. There is also a chilli system in place. Workers are controlled from the DSR Breaker board.
[[File:Chandler_Crossbars_Doc.pdf]]

Latest revision as of 10:12, 16 June 2023

All lanterns are supplied in working order with hook clamps, wing nuts and safety bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults or damages to the Venues Team.
All lanterns have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.


Profiles

ETC S4 jr Zoom 575w 25°/50°
Weighs 4.5kg
All S4's have a safety bond attached
13 Complete with bonded colour frames
3 with missing colour frames
5 with broken/damaged colour frames

21 in stock

Fresnels

Selecon Acclaim F 650w 6°/60°
Weighs 3.3kg
All Acclaim F's have a safety bond attached
6 complete with Barndoors and Colour Frame
1 with missing barn doors
14 with missing colour frames
3 with damaged barn doors
350px‎24 in stock

PCs

Selecon Acclaim PC 650w 4°/64°
Weighs 2.8kg
All Acclaim PC's have a safety bond attached
5 complete with Barndoors and Colour Frame
4 with missing barndoors.
14 missing colour frames.
3 with broken/damaged colour frames.
26 in stock

Beamlights

ETC S4 PAR 750w
12 S4 PAR EA - Weighs 3.4kg
10 complete with Colour Frame
1 with missing Colour Frame.

1 S4 PARNel - Weighs 3.6kg
1 complete with Colour Frame

13 in stock

Floods

Strand Coda 4 500w
Weighs 11kg

4 in stock

Moving Lights

Robe DL4F LED 450W
RGBW LED color engine 15-50 degree zoom weight: 20.8 KG (45 lBs)

https://www.robe.cz/dl4f-wash/

3 in stock 1 is out for repair at ROBE

Hazers and Smoke Machines


THESE UNITS ARE NOT SPECIFIC TO THE VENUE AND ARE GENERAL STOCK - ENSURE YOU BOOK THE CORRECT UNIT FOR YOUR SHOW!

Look Solutions Viper 2.6 Fog Machine
The Viper 2.6 is a 230 Volt, 2600 Watt high performance fog machine.
The output is twice as powerful as the Viper NT. It has a built-in timer and DMX. Heat-up time is approximately 7 minutes.
Pump can be adjusted in increments of 1%-99%.
Continuous output when pump is set <50% and settings above 50% will yield a 40 second blast.
2 in stock shared with all venues


Look Solutions Unique 2.1 Haze Machine
The Unique 2.1 is one of the most popular professional hazers in the world. Ideal for highlighting and supporting light and laser effects.
Minimal warm up time of only 60 seconds
Minimal noise
Pump and fan adjustable separately in 99 steps, therefore variable output (from the finest mist to a thick haze, similar to fog)
Internal fan ensures quick and homogen distribution
DMX as standard, analog (0-10V) and stand-alone running
Control of the pump, fan and the adjusting of the DMX start address is achieved with buttons
Internal Timer
Haze-Density Control System
Minimal fluid consumption (2l canister guarantees up to 50 hours continuous output)


1 in stock shared with all venues



Smoke Factory Tour Hazer 2
The perfect haze machine: creates a fine haze for your own ‘Designer Mist’ - high output haze and inbuilt fan
Power: 1500 W
Fluid consumption: 5 litres, 120 hours at 50% output
Control options: DMX 512 + stand alone, timer
Hazemaker based on vaporising for generator.
1 in stock shared with all venues

Control

ETC Eos Ti With one Multi Touch Displays

Product Features
•10,000 channels (devices)
•4,096 outputs/parameters
•Dedicated master playback fader pair
•10 definable motorized faders, with 30 pages of control
•20 user-definable buttons
•999 cue lists
•200 active playbacks
•300 submasters
•Dedicated pan/tilt encoders, four pageable encoders
•Two articulating 17” LCD multitouch displays
•Supports three external DVI/SVGA monitors; can be single- or multitouch
•High-density live and blind displays
•Virtual Media Server Control with Stock Content (user images may be imported)
•Device discovery and troubleshooting via RDM
•ETC Sensor® CEM+, CEM3™ and FDX dimmer feedback and controls
•User-definable channel and control layouts
•ETCNet3™ (ACN based), ETCNet2™, Artnet and Avab® UPD protocol output
•Integrated keyboard drawer with USB ports
•Two individually configurable network ports
•Backlit keyboard
•Multiple MIDI and SMPTE Inputs •Client/server networking and synchronized backup •Client and Offline programming on PC (Windows 7 or XP) and native on Macintosh (Intel only, OS X) •Data-laundering from Obsession™, Express™, Expression®, Emphasis®, Congo®, Transtechnik NT, Avab VLC and Strand 500/300 series show files via ASCII •12 discrete online users with partitioned control •Two 802.af-compliant PSE Ethernet ports, individually configurable




Houselights are addressed to dimmer 126. There is also a chilli system in place. Workers are controlled from the DSR Breaker board.

15A TRS

Colouring Convention: R E D 3 letters = 3 meters etc.

1m WHITE

2m WHITE (2 stripes)

3m RED

4m BLUE

5m GREEN

6m PURPLE

10m YELLOW


Dimmers and Hot Power

The Chandler is equipped with 72 ways of Zero 88 Chilli Pro 24-10i dimmers. Each dimmer channel has a 10Amp capacity. There is a plan below showing the locations of these dimmers. The Chandler also has 8 ways of DMX switched hot power. Again these are marked on the plan. An additional 6 dimmer outlets are located at the stage floor level towards the dock doors. These are numbered 57 through 62. A 6 way 15amp outlet panel is located above the vestibule exit door beside the Dock Door entrance. This has a permanent link of socapex cable to the the floor sockets numbered 57 through 62. The socapex cable will require a 15a plug spider if the panel outside the venue need to be utilised.


Rigging Positions

The Chandler has pre allocated cross bars primarily to act as lighting rigging positions but to be shared for the rigging of suspended set items etc. The default layout is shown below:

File:Chandler Crossbars Doc.pdf