New Athenaeum

All lanterns are supplied in working order with hook clamps, wing nuts and safety chains/ bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults and damages to the Venues Team. All lanterns with the note below have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.

Moving Heads

4 x MAC Encore Performance CLD

Martin Mac Encore Cold

MAC Encore™ Performance CLD integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition. The feature-packed moving head offers unparalleled 6000 K crisp, neutral daylight. Its advanced colour mixing system delivers the full palette from smooth and subtle pastels to rich and vibrant saturated colours. Moreover, it offers a fully variable colour correction to tungsten/orange. - https://www.martin.com/en/products/mac-encore-performance-cld -

Weight: 31Kg

Profiles

Source Four 14 Degree

4 in stock

Weight: 8.8kg

---

Source Four 19 Degree

20 in stock

Weight: 6.3kg

---

Source Four 26 Degree

20 in stock

Weight: 6.3kg

---

Source Four 36 Degree

19 in stock

Weight: 6.3kg

---

Source Four 50 Degree

9 in stock

Weight: 6.3kg

---

Source Four 70 Degree

6 in stock

Weight: 7.9kg

---

Source Four 15°-30°

10 in stock + 3 spare lens tubes (no light source)

Weight: 9.5kg

---

Source Four 25°-50°

11 in stock

Weight: 8.5kg

---

---

To go along with the source 4 profiles we also have 50 gobo holders that take a size B gobo.

We also have 20 iris for the source fours.

---

Strand Prelude 16/30
These are for use as conductor spots only and are not to be moved
2 in stock

Fresnels + PCs

Source 4 750w Fresnel
9°- 52°
Weight 6.1kg
all Fresnels come complete with barndoors and colour frame
6.1 kg

54 in stock

---

---

Selecon Arena 2000w Fresnel
7°- 60°
Weight: 10kg
all Fresnels come complete with barndoors and colour frame
10kg

10 in stock

---

ADB CH50 5000w Fresnel
13°- 58°
Weight: 11.9kg

1 in stock

Selecon Rama PC 1200 W .
4.5°- 62°beam angle.
Weight 7.2kg

4 in stock

---

Beamlights

RUSH PAR 2 RGBW Zoom

The RUSH PAR 2 RGBW Zoom is a bright single-lens LED PAR Can with fully premixed color from 12 RGBW LEDs and a spectacular 10 – 60 ° zoom. It offers electronic dimming and strobe and comes with a flexible bracket for floor or truss mounting. Weight 5.5kg
10 in stock

ETC Source 4 Par

51 in stock

Weight 3.4kg
A full selection of VNSP / NSP / MFL / WFL Lens options are available for these units
This is a good guide about how to change Source 4 Par Lenses, and how to tell the different types. Limited barndoors availiable for these units

Source Four ParNEL

This fixture is a hybrid PAR and Fresnel. It has an alterable beam to change its shape from wide to narrow using a rotating knob beneath the lens. The twin glass lenses do reduce the light output in comparison to a S4 PAR quite considerably! It is distuinguishable from a standard S4 Par by the know beneath the unit AND a dappled effect lens
Weight 3.4kg
6 in stock

Floods

1000w Selecon LUI asymmetric flood

10 in stock

---

Source Four LED CYC

20 in Stock Weight with Cyc - 7kg ---- Weight with Barrel - 8.3kg
there are 20 of these cyc units. They consist of 20 CYC lenses that turn any LED source 4 into a cyc light. Ours are powered by source 4 Lustr+, these are full colour mixing LEDs. The best mode for using with the GrandMA2 and its colour picker appears to be HSIC Plus7. Do be sure to check the Lustr+ manual for correct operation of the fixtures in their differing modes using the console.
Please note that you will need to hire in power and DMX cables if you use these lights not as the cyc lights.

Follow Spots

2 Robert Juliet Korrigan 1200W HMI with Ballast, complete with 3 frame colour changer

Beam angles

Below is a quick guide to callculating the throw of lanterns.

Hazers and Smoke Machines

THESE UNITS ARE NOT SPECIFIC TO THE VENUE AND ARE GENERAL STOCK - ENSURE YOU BOOK THE CORRECT UNIT FOR YOUR SHOW!

Look Solutions Viper 2.6 Fog Machine
The Viper 2.6 is a 230 Volt, 2600 Watt high performance fog machine.
The output is twice as powerful as the Viper NT. It has a built-in timer and DMX. Heat-up time is approximately 7 minutes.
Pump can be adjusted in increments of 1%-99%.
Continuous output when pump is set <50% and settings above 50% will yield a 40 second blast.
2 in stock shared with all venues

Look Solutions Unique 2.1 Haze Machine
The Unique 2.1 is one of the most popular professional hazers in the world. Ideal for highlighting and supporting light and laser effects.
Minimal warm up time of only 60 seconds
Minimal noise
Pump and fan adjustable separately in 99 steps, therefore variable output (from the finest mist to a thick haze, similar to fog)
Internal fan ensures quick and homogen distribution
DMX as standard, analog (0-10V) and stand-alone running
Control of the pump, fan and the adjusting of the DMX start address is achieved with buttons
Internal Timer
Haze-Density Control System
Minimal fluid consumption (2l canister guarantees up to 50 hours continuous output)

1 in stock shared with all venues

Smoke Factory Tour Hazer 2
The perfect haze machine: creates a fine haze for your own ‘Designer Mist’ - high output haze and inbuilt fan
Power: 1500 W
Fluid consumption: 5 litres, 120 hours at 50% output
Control options: DMX 512 + stand alone, timer
Hazemaker based on vaporising for generator.
1 in stock shared with all venues

Control

Control in this venue is normally the GrandMA 2 (Light). More details here

DMX goes directly to the chilli dimmers from the Ath control room. There is also a line to the gods (labelled "To Patchbays") which then goes to the promptside flys. There are 1u splitter units at each of these locations.

Houselights are on channels 221 through 224. If the desk is powered up + plugged in it will override the chilli system. Be aware of this!

DMX Cable Stock - FOR BOTH ATHENAEUM AND CHANDLER:

1m x 4

2m x 20

5m x 50

10m x 15

20m x 5

ADDITIONAL - There are 3 x 10m lengths of DMX set aside for patching the desk into the DMX tie lines at the rear of the Athenaeum auditorium. These 3 cables are to be kept in the Athenaeum control room, and are marked with RCS Production Dept white tape.

Cabling

Socapex

Mulitcore Lengths

UPDATE 19/04/2023

7x 5m

6x 10m

6x 15m

13x 20m

1x 40m

Tails + Spiders

Spiders/Break-ins

21 x 800mm (Short)

ADDITIONAL - There are an additional (to the above stock) 4 x 800mm short 15a plug to Socapex break in spiders in the Athenaeum Gods. These are to allow the FoH booms and Auditorium IWB's to be plugged into the Gods dimmer outlets and should remain in the Gods for this purpose until the require PAT testing.

Tails/Break-outs

12 x 800mm (Short)

2x 1800mm (Long)

Socapex weights

Internally Wired Bars (IWBs)

All IWBs are wired to 15A connections and cannot be changed.

4x Short Black - 6 Circuits each (approx. 17.5kgs) (Numbering 6 > 1 with 6 @ Socapex Plug End)

3x Long Silver - 6 Circuits each (approx. 17.5kgs) (Numbering 1 > 6 with 1 @ Socapex Plug End)

2x Long Silver - 12 Circuits each (approx. 35kgs) (Numbering 1 > 12 with 1 @ Socapex Plug End

INSTALLED IWB's 4 x Short Installed vertically - 2xSL and 2xSR DS of Proscenium

Stage Left and Stage Right LOWER IWB's - Socapex Plug at floor end (Numbering 1 > 6 from floor upwards)

Stage Left and Stage Right UPPER IWB's - Socapex plug at Gods End (Numbering 6 > 1 with 6 closest to Gods)

Auditorium 2nd Circle White IWB (Numbering 1 > 6 with 1 Closest to Proscenium wall)

TOTAL IWB Circuits:64

CEE Form

Single Phase 1Φ

16A

UPDATED - 03/10/23

2m x 9

5m x 10

10m x 14

15m x 3

20m x 2

ADDITIONAL - A loom of 2 x 15m 16a and 20m 5pin dmx lives in Athenaeum gods and is for exclusive use on the FoH truss - These lengths allow for two drops of cable from Gods distro to Truss. An additional 1 x 5m 16a cable is also stored in the Gods to then allow a cross truss extension if required. All cables are length marked, and marked "Reserved for Use on Athenaeum FoH Truss".

Total Length: 158m

32A

2 x 10m
4 x 20m
2 x 30m
1 x 5m - lives in Athenaeum Gods to utilise 32a distro box to power the FoH truss motors and lighting fixtures on the truss.

N.B. If the ground rows are in use with the Back Projection Screen then these are used to extend the ground row multicore

63A

1x 6m

Jumps

15A - 32A

1x 2m

1x 5m

32A - Groundrow

2x 3m

16A - 13A

1x 2m (Single Way)

1x 1m (4 Way)

Three Phase 3Φ

32A 3Φ

1x 6m

15A TRS

CORRECT AS 15/04/22

Colouring Convention: R E D 3 letters = 3 meters, B L U E 4 letter = 4 meters etc.

0.5m WHITE x 4

1m WHITE x 8

2m WHITE (2 Stripes) x 59

3m RED x 25

4m BLUE x 28

5m GREEN x 52

6m PURPLE x 7

10m YELLOW x 38

15m YELLOW + GREEN x 6

MINIMUM TOTAL Length: 1003m

b>TOTAL Count: 231

Powercon TRS Interlinking Extensions

9 x 5m Green (marked "Production Dept") - 1 missing 12/12/22 - Stored on peg in Ath cable store

6 x 5m (unmarked) - Stored in Venues office

45 x 2m - Stored in Venues office

1 x 30m - Stored in Venues office

Dimmers

All circuits are hard patched to their respective dimmer.

‎

Non-Dims

There are 12 non-dim circuits (16A sockets on 16A breakers) on stage floor level, 6 USL and 6 USR, DMX 243 - 254.

There are 12 non-dim circuits (16A sockets on 10A breakers) on the prompt side fly floor, DMX 231 - 242.