La Rondine: Difference between revisions

From paperclip
Jump to navigation Jump to search
Slord (talk | contribs)
Bterry (talk | contribs)
 
(17 intermediate revisions by 3 users not shown)
Line 64: Line 64:
|}
|}


An Opera in 3 Acts by Giacomo Puccini. To be performed 10-15th May 2014.
An Opera in 3 Acts by Giacomo Puccini. Performed 10-15th May 2014.


==Company==
==Company==
Line 75: Line 75:
==Groundplan==
==Groundplan==


La_Rondine_Groundplan_Updated_21-4.pdf
<pdf>La_Rondine_Groundplan_Updated_21-4.pdf</pdf>


==Flyplot==
==Flyplot==


<pdf>La Rondine Flyplot V4.pdf</pdf>
<pdf>Flyplot_V5_Fly_Plot.pdf</pdf>


==Technical Elements==
==Technical Elements==


===False Pros===
===False Pros===
3 positions. Seen here in Act 1. Act 1 the lowest, Act 3 the highest.
[[File:La Rondine Act 1 pros.jpg|600px]]
Drapery attached to the bottom of the sliding header piece.
===Pros and Sky cloths===
Unusually, there were very few hard clad flats within the production. The header piece for the false proscenium, and the skyscape flown piece were constructed from painted cloths that were stretched over a basic wooden frame.
Due to the size of the pieces, the cloths were painted in Scenic at SLS, but were not stretched over the frames until they arrived in Renfrew Street.
Method:
1. Bolt wooden frames together
2. Attach all flying hardware
3. Ensure frame is 'face' up
4. Carefully unfold cloth, and lay across frame face up
5. Gently spray face of cloth with warm water using pressurised sprayer. Ensure that water is lightly and evenly distributed across entire cloth.
6. Lightly tack corners of cloth using staples at an angle. These should be put into the top edge of frame. The angle will enable staples to be removed if necessary, later.
7. Start stretching cloth from centre of long sides, providing tension across frame. At least 4 people are required to achieve this. Work from centre to outside corners.
8. Repeat along short sides.
9. Finish edges by glueing canvas down and trimming excess.
After these flats were hung, we had some issues with wrinkling and puckering of the fabric. This was solved through evenly spraying the affected area with warm water. Upon drying, the wrinkles were (largely) gone!


===Boudoir Truck===
===Boudoir Truck===
Line 90: Line 125:


===Confetti Drop===
===Confetti Drop===
As the DS area of the stage was very cramped, this had to be hung from 1 bar. It also needed to be operated by a performer on stage.
We found that this method of making a confetti drop was very good. Unlike the traditional method of using 2 bars and a bag between the two, we found that the amount of confetti dropped was very easily controlled, along with a very precise 'start' and 'stop' to the confetti drop.
Confetti used was a 25/25/25/10 mix of Le Maitre Chinese Confetti in Blue, Le Maitre Chinese Confetti in Red, White Paper confetti and Le Maitre Glitter confetti in Gold.
The White paper confetti was left over from [[Carousel 2013]] and was sourced from [http://www.halo.co.uk/index.php/sales/confetti/metallic-confetti-loose/493-white-paper-confetti/ Halo Lighting]
[[File:La Rondine confetti drawing front.jpeg|1000px]]
[[File:La Rondine confetti drawing side.jpeg|650px]]
===Beams with foliage, bunting and lanterns===
=LX=
== Cheap Mega Edison Bulbs==
[http://www.enamelshades.co.uk/ Enamelshades.co.uk]
==Fibre optic source==
[https://starscape.co.uk/ Starscape.co.uk]
==Lx Main Plan==
<pdf>La_rondine_Rig_Plan_1-25_A0.pdf</pdf>
==Lx Pendant==
<pdf>La_Rondine_Pendant_LX_Plan_v2013_V3.pdf</pdf>

Latest revision as of 12:37, 8 June 2014

La Rondine
Creative
Director Benjamin Davis
Composer Giacomo Puccini
Set Designer Guiseppe Belli
Costume Designer Emma Belli
Lighting Designer Oliver Gorman
Production Team
Stage Manager Oran O'Neill
Deputy Stage Manager Jane Paterson
Technical Stage Manager Jennifer Howes
Deputy Technical Stage Manager/Head of Flys Ian Smyth
Deputy Technical Stage Manager Stuart Lord
Chief Production Electrician Ben Terry
Deputy Production Electrician Kieran Fitzpatrick
Lighting Operator and Programmer Laura Mason
Lighting Crew Amy Donaldson Ross Pringle
Information
Venue New Athenaeum
Performance Dates 10th - 15th May 2014

An Opera in 3 Acts by Giacomo Puccini. Performed 10-15th May 2014.

Company

Creative Team

Technical Team

TSM

Groundplan

Flyplot

Technical Elements

False Pros

3 positions. Seen here in Act 1. Act 1 the lowest, Act 3 the highest.

Drapery attached to the bottom of the sliding header piece.

Pros and Sky cloths

Unusually, there were very few hard clad flats within the production. The header piece for the false proscenium, and the skyscape flown piece were constructed from painted cloths that were stretched over a basic wooden frame.

Due to the size of the pieces, the cloths were painted in Scenic at SLS, but were not stretched over the frames until they arrived in Renfrew Street.

Method:

1. Bolt wooden frames together

2. Attach all flying hardware

3. Ensure frame is 'face' up

4. Carefully unfold cloth, and lay across frame face up

5. Gently spray face of cloth with warm water using pressurised sprayer. Ensure that water is lightly and evenly distributed across entire cloth.

6. Lightly tack corners of cloth using staples at an angle. These should be put into the top edge of frame. The angle will enable staples to be removed if necessary, later.

7. Start stretching cloth from centre of long sides, providing tension across frame. At least 4 people are required to achieve this. Work from centre to outside corners.

8. Repeat along short sides.

9. Finish edges by glueing canvas down and trimming excess.


After these flats were hung, we had some issues with wrinkling and puckering of the fabric. This was solved through evenly spraying the affected area with warm water. Upon drying, the wrinkles were (largely) gone!

Boudoir Truck

Booths

Confetti Drop

As the DS area of the stage was very cramped, this had to be hung from 1 bar. It also needed to be operated by a performer on stage.

We found that this method of making a confetti drop was very good. Unlike the traditional method of using 2 bars and a bag between the two, we found that the amount of confetti dropped was very easily controlled, along with a very precise 'start' and 'stop' to the confetti drop.

Confetti used was a 25/25/25/10 mix of Le Maitre Chinese Confetti in Blue, Le Maitre Chinese Confetti in Red, White Paper confetti and Le Maitre Glitter confetti in Gold.

The White paper confetti was left over from Carousel 2013 and was sourced from Halo Lighting


Beams with foliage, bunting and lanterns

LX

Cheap Mega Edison Bulbs

Enamelshades.co.uk

Fibre optic source

Starscape.co.uk

Lx Main Plan

Lx Pendant