SA 1001 Flints Cyclorama Mural Adhesive

Flints Cyclorama Mural Adhesive

	COSHH Risk Assessment	No:	SA 1001
		Review:	Following any significant product or procedure changes but no later than 2 years
Product/Trade Name:	Cyclorama & Mural Adhesive	Revision date:	07/02/2025
Company:	Flints	Issued by:	Megumi McKillop
Contact:	sales@flints.co.uk	Areas of use:	Paint shop – Wallace Studios
Used for:	Bonding canvas, cyc, vinyl, plywood or hardboard.

Properties of substance	Potential hazard routes	Quantity in use	Exposure when used	Fire extinguisher medium
Liquid	Inhalation; Eye Contact; Skin Contact; Ingestion	5L	<4 hrs	CO2; Powder; Water Spray; Foam.

Hazard statement	Precautionary statement
None provided.	May produce an allergic reaction.

Hazards associated with use	Hazardous components	STEL	8hr TWA
	N/A	-	-

Work activity	Frequency and duration	People exposed	Existing controls	Probability of exposure	Severity   of exposure	Risk rating
It is recommended for sticking large canvas murals and cycloramas. It can also be used to bond vinyl dance floor to plywood or hardboard.	Occasionally for <4-hour duration at a time.	Person carrying out the task.	Training and awareness. Always read the instruction label. Wear appropriate PPE.	2	2	4 (Low)
Mix the product to consolidate texturing compounds such as rubber crumbs.	As above.	As above.	As above.	2	2	4 (Low)
May be used as an adhesive for polystyrene.	As above.	As above.	As above.	2	2	4 (Low)
There are 3 methods that can be employed for application: Dry Bond: Apply the adhesive to the wall and allow to dry. Gently position the cloth on the wall, adjust as necessary, then press down firmly. The cloth can be removed at a later date by peeling off. The Double Bond: Flints Cyclorama Adhesive performs well as a waterbased contact adhesive. Apply adhesive to both the wall and the cloth. Allow to dry. Press the cloth onto the wall for a permanent bond. This method will provide a strong bond for many surfaces including dance floors. Wet Bond: Use as a conventional glue. Apply the cloth to the wet adhesive and allow to dry for a permanent bond.	As above.	As above.	As above.	2	2	4 (Low)
Cleaning the tools used to apply this product.	After each time the task is carried out.	As above.	Wear appropriate PPE.	2	2	4 (Low)

Required PPE:

Respiratory protection:   Not necessary if room is well-ventilated.   Protection of hands:   Wear nitrile gloves.   Eye protection:   Safety glasses are recommended.   Body protection:   Wear protective work clothes.

Written Systems of Work: Are operations carried out in accordance with the documented information and systems of work?	Yes
Training and Procedures:   Are the training provisions and working procedures adequate for the personnel working with this process or product?	Yes
Risk Reduction:   Can the hazardous substance be substituted for a less hazardous substance?	No

First Aid	Inhalation		Supply fresh air; consult doctor in case of complaints.
	Skin Contact		Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
	Eye Contact		Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
	Ingestion		Rinse out mouth and then drink plenty of water.

Accidental Release		Wear protective clothing. Particular danger of slipping on leaked/spilled product. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste.  Clean the affected area carefully with warm water
Storage/Handling		Store only in unopened original receptacles. Protect from heat and direct sunlight. Protect from frost. Avoid contact with the eyes and skin.
Environmental		Do not allow to enter sewers/ surface or ground water.
Disposal		Disposal must be made according to official regulations.

Assessed by:	Megumi McKillop	Date:	01/01/2025	Review date:	01/01/2027
Approved by:		Date:		Issue No.:	4
Risk Assessment conclusion:	Minimal risk when procedures are followed

File:1001 flints cyclorama mural adhesive.docx This assessment applies only to this product and to the use described above.  

If other products are used, or the use of this product changes, a new assessment MUST be made.