Stage Hardware
Quantities last Updated August 2020
Current Stock Levels Available on Tracking This
Track
Genie Trap
Scaffolding Pipe
Dog Leg Pipe
We have 8 in total, which are side-specific. 4 SL and 4 SR
Each dog leg measures 3m Onstage by 1.5m Downstage
Kee Clamp & Scaff Clamp
Information about Kee Clamp & Scaff Clamps can be found in the Flints Catalogue
Kee Clamps (or Hex Key Tube Fittings) are primarily a handrail product, but can be used in a variety of ways. Structures are built by inserting a scaffold tube into one of a variety of joiners and tightening a grub screw onto the scaffold tube with a hex key.
Straight Joiner (coupler) 6
Swivel Socket Flange (90") 13
Swivel Socket Flange (180") 2
Single Swivel Socket - 1
Rail Support - 1
Misc. Kee Clamps - 9
Kee Clamp Scaff Foot
Half - 9
Full - 12
Joint Pins - 12
Scaff Clamp
Scaffold clamps are a means of joining scaffolding tube together to make scaffolding. Generally, these come in two types, swivel and 90 degrees. Gravlocks are for securing scaffolding pipe to I or C Beams and must be used in pairs on either side of an I Beam or on opposing C or I Beams.
Swivel Couplers - 56
90 Degree (Fixed Right Angle Coupler) - 14
Gravlock - 23
Flying Weights
Full Weights 12kg - 600
'Half' Weights 7.5kg - 50
Stage Weights
Stage Weights - 33
Ratchet Straps
We have a transient stock of ratchet straps in 1" and 2" width, that come in both endless and hook ended.
This stock lives between the cage, grid and the workshops.
Fixings
Most of our fixings are located in The Cage on the Hardware Trolley or the Small Parts Bin on the workbench. Screws are located within the toolboxes and if they run out, more can be requested from TSD staff.
Nuts & Bolts
Our stock level for Nuts & Bolts is ever-changing, but we try to always hold stock in the following.
Each size is listed as it appears in its parts bin in the cage.
Hex Bolts (Including set screws)
M12 - 20-25mm, 30-35mm, 40-45mm, 50-55mm, 60-75mm, 80-100mm, 120mm+
M10 - 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 80mm, 100mm, 120mm+
M8 - 20-25mm, 30-35mm, 40-45mm, 50-60mm, 65-75mm, 80-100mm
M6 - 20-25mm, 30-35mm, 40-45mm, 50-55mm, 60-65mm, 70mm+
Machine Screws
M4 Countersunk Pozi 2 Head - 30mm
M5 Countersunk Pozi 2 Head - 40mm
M6 Countersunk Pozi 3 Head - 20mm, 30mm, 40mm, 50mm
Nuts & Inserts
Hex Nuts - M12, M10, M8, M6, M4
Nylocs (locking nuts) - M12, M10, M8, M6, M5
Wingnuts - M12, M10
T-Nuts - M10, M8, M6, M5
Threaded Inserts - M10, M8
Washers
Standard washers - M12, M10, M8, M6, M4
Mudguard Washers - M10, M8, M6
Square Washers - M12, M10
Spring Washers - M12
Screws
We hold two different diameters of screws, 4mm and 5mm. These are all driven using a POZI 2 bit and we have these in the following lengths:
4 x 16mm, 4 x 20mm, 4 x 25mm, 4 x 30mm, 4 x 35mm, 4 x 40mm, 4 x 45mm, 4 x 50mm, 4 x 60mm, 4 x 70mm
5 x 30mm, 5x 50mm, 5 x 70mm, 5 x 100mm
Coach Screws
We have an assortment of coach screws from 6mm to 10mm in diameter and from 50mm to 100mm in length.
Related Items
Wall Plugs for fixing items into walls - 6mm & 8mm
Screw Cups
Hinges
We have 4 different Hinge types in stock, they are:
Flints Opera Pin Hinges
Flints Exhibition Pin Hinges
Pin Hinges
Back-flap Hinges
Scenery Fittings
Flints have a large amount of Scenery Fittings. Many of these have more than one use, so becoming familiar with these will help you when you encounter technical challenges. This stock floats between the cage and the workshop and usually contains some of the following:
Cleats & Clummets
Screw Eyes
Ring Plates
Small Brackets
Large Brackets
Boss Plates
Stud Plates
Pelmet Clips
Flush Plates
Button Pelmet Clips
Bolt Plates
Miscelaneaous Items
Magnetic Door Catches
Split Rings
Slit Pins S, M, L
Assorted R-Clips
Panel Pins - 15mm, 20mm
Scaffold Grub Screws
Dowel Pegs - 10mm
Curtain Hooks
Picture Hooks & Hangings