Jack and the Beanstalk
| Jack and the Beanstalk | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
Company
Creative Team
Technical Team
Technical Stage Management
Groundplan
Flyplot
Due to the size of the LX bars, it was necessary to brail a number of the bars.
Masking
Pit Bridge
In previous performances which require the use of a pit bridge, there had been a number of various solutions to this problem.
For this show, it was felt that a stock platform, with stock treads should be built. This could then be customised with different height legs.
Technical Challenges
Beanstalk
A crucial element of any production of 'Jack and the Beanstalk' is not complete without a beanstalk... This year, our beanstalk was provided by the Designer, Robin Peoples. It consisted of a fan unit, with a large section of rip-stop fabric attached to the top, forming the 'beanstalk' element.
As we were concerned about the amount of noise the fan would produce if it were to be onstage, we sited the fan unit in the pit. One of the pallets in the stage floor was removed, and replaced with a trap unit. This meant that although the fan was in the pit, the beanstalk could still appear on stage!
As the beanstalk was of fabric construction, we used a spot line attached to the top, to prevent it flapping around the stage on inflation and deflation. Although a line of hemp was used to go from the flyfloor, through the grid, fishing line was used wherever the line would be visible. This was felt to be strong, but also relatively invisible.