Chandler

From paperclip
Jump to navigation Jump to search

All lanterns are supplied in working order with hook clamps, wing nuts and safety bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults or damages to the Venues Team.
All lanterns have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.

Moving Heads


Martin MAC TW1
The MAC TW1 is a powerful, silent tungsten wash light with a clean, even, soft-edged beam, a motorized zoom, rich CMY color mixing and both internal and external electronic dimming. Weighs 27kg

4 in stock. Contact Venues Team to ensure availability. Available for use elsewhere if not required in the Chandler.

Profiles

ETC S4 jr Zoom 575w 25/50
Weighs 4.5kg
All S4's have a safety bond attached
Complete with 16 bonded colour frames 16

Strand SL 19 600w 19
Weighs 6.8kg
All SL 19's have a safety bond attached
Complete with 6 bonded colour frames 6

Selecon Acclaim Zoomspot 650w
2 in stock

Fresnels

Selecon Acclaim F 650w 6/60
Weighs 3.3kg
All Acclaim F's have a safety bond attached
Complete with 23 bonded barndoors and 15 bonded colour frames 22 (1out for repair)

PCs

Selecon Acclaim PC 650w 4/64
Weighs 2.8kg
All Acclaim PC's have a safety bond attached
Complete with 23 bonded barndoors and 15 bonded colour frames 26

Beamlights

Parcan (PAR 64) 1000w various lens options
PLEASE NOTE - We have a variety of PAR 64 lamps - we may not have all of the same lamps that you require for your show.
Weighs around 2kg (depends on lantern)
All Parcan's have a safety bond attached
Complete with 20 bonded colour frames 20

floods

Strand Coda 4 500w
Weighs 11kg 4

Hazers and Smoke Machines

Le Maitre MVS Hazer
The Multi Venue System (M.V.S) has a variable high output haze with whispers to 80cc/hr, twin variable high output haze projection fans and 90 degree electronically variable haze output direction. It features four channel DMX512, combined control functions and DMX receiver. The MVS has a higher power air pump and advanced fan motor control for wide range operation. It’s larger diameter hazing tube doubles the effective area and increases its working life span, and makes cleaning easier. The MVS is arc bonded, shielded and has a heavy duty thermo-couple sensor. It also has data storage capability.
FEATURE LIST Variable high output haze: whisper to 80cc/hr (double existing Neutron). Twin variable high output haze projection fans. 90 degree electronically variable haze output direction. 4 Channel DMX 512. 3 digit led display multifunction control panel. Combined control functions and DMX receiver. Data storage capability. Simplified high current control using computer inrush control. Higher power air pump. Electronic Haze output angle control. Advanced fan motor control for wide range operation. Higher output controllable haze. Larger diameter hazing tube 3.3mm (2.4mm) doubles effective area for increase in working life span, and easier cleaning. Arc bonded, shielded and heavier duty thermo-couple sensor. External Bottle design allows for multiple position use. Clip-on bottle carrier for easy transport (Bottle carrier is OPTIONAL). No oil residue. Continuously variable fan output up to 125 cubic metres per hour.
1 in stock

Look Solutions Viper 2.6 Fog Machine
The Viper 2.6 is a 230 Volt, 2600 Watt high performance fog machine. The output is twice as powerful as the Viper NT. It has a built-in timer and DMX. Heat-up time is approximately 7 minutes. Pump can be adjusted in increments of 1%-99%. Continuous output when pump is set <50% and settings above 50% will yield a 40 second blast.
2 in stock

Control

Strand 530i (c/w 2x Monitors)


Check with venues team/PLX Lecturer/Other PLXs

Houselights are on channels 301 through 303. There is also a chilli system in place. Workers are controlled from the DSR Breaker board.