Stage Automation

Stage Technologies Automation User Generated Handbook

Hardware

Moving the winches

When moving the winches ensure that the entire system is powered down. Unplugging the encoder cables with any power running through the system will cause a "drive error" upon power up. If a drive error does occur it can be reset by either querying the drive and enabling reset or enabling "reset drive" via the "devices" function.

Be careful of the counterweight lines while moving, they are easily trapped and damaged

Software

Drive Reset

If the encoder cables has been unplugged for moving a winch the drive must be reset within Chameleon. Either Query the axis via Axis . Query and execute the reset option under diagnostics or call up the "drive in error" from the Devices menue and execute the drive reset from there. NOTE: The axis must be live on a playback for this to work

Tab Display

To set and save the Tabular display for specific shows and/ or users confirm

• Right Click on the Blank Desktop
• Select "Add Data Area"
• Right Click
• Select "Edit Axis and click "Ok" when done"
• Right click on desktop again
• Select "Save Display"