Cinderella 2019

.

Cinderella 2019
Summary
Dates Sat 7th Dec - Fri 13th Dec
Performance Course Third Year BA Acting
Location New Athenaeum Theatre
Creative Team
Director Ali De Souza
Designer Ken Harrison
Sound Designer Meirian Hall-Jones
Lighting Designer Rhys Gaughan
Production Team
Stage Manager Danielle Waldman
Deputy Stage Manager Jessica McKay
Assistant Stage Manager Pierce Brown
Stage Supervisor Sean Ramsay
Head of Flys Greig Buckley
Deputy Stage Supervisor Noah Dates
Deputy Stage Supervisor Erin Johnstone
Assitant Stage Supervisor Shannon White
Assitant Stage Supervisor Eve Imrie
Assitant Stage Supervisor Alexandra McKenna
Production Electrician Jamie Murray
Deputy Production Electrician Louise Chan
Deputy Production Electrician Sasha Belcher
Lighting Technician Ross Hunter
Lighting Technician Coral Nelson
Lighting Technician Stuart Green
LX Programmer Andrew Lynch
Production Sound Engineer Hayley Grogan
Sound No.1 Connor Brown
Sound No.3 Catherine Donaldson

Stage Department

Ground Plan

Kinesys Lift

To access one of 4 balconies in this show we used a 4x4 piece of steel and our kinesys automation software to make a lift. This meant that we were maximizing the amount of space in the wings as when the platform was not in use we could fly it up out the way to allow set to pass below. To get the points in the grid where we wanted them we had to make up bridles to span between the beams and also remove grid panels. The bridles were made up using beam clamps, Shackles, Strops and clutch chains. Down on the piece of steel deck we attached handrails to 3 sides and had a gate made for the final so that when it was moving the people on it could not fall out and felt comfortable while they were in it. To reduce the swinging movement in the lift two guides were attached. The first guide was made using a 4000mm and 2000mm section of uni beam which was attached onto a scaff pole and out rigged on edge from the truss. Onto the track was a heavy duty scenery carrier which was bolted through the bolt hole on the steel deck. Down the other side of the deck was a tension line which ran from the grid straight to stage. An eye bolt and pulley were attached onto the steel deck platform using another bolt hole so that the pulley ran smoothly as the lift went up and down.

Truss Bridge

Fly plot

Set Images

Sound

x