Show Control Systems
Calum Paterson. Negotiated Project. DO NOT REMOVE PLEASE
An Introduction To Show Control Systems
Welcome and thank you for taking the time to read this manual. First off, let me say that what you read in this manual will be in no way exhaustive, but hopefully it gives you the basic information and an understanding of how to set up a show control system for your theatre show.
What we will cover in this manual are MIDI, OSC, and how they work and interact with show playback software, sound consoles and lighting consoles. Specifically, we will pay close attention to QLAB, ETC Lighting Consoles, MA lighting Consoles, Yamaha Sound Desks and Digico Sound Desks. This manual will cover how to set these controls up and how to use them within a show.
As Qlab is the industry standard for show control and playback operation, we will pay close attention to this software and it will form the grounding for all our examples of operation within this manual.
Overview of Midi
Musical Instrument Digital Interface (Midi), is a technical standard, which describes a protocol, interface and connectors. The protocol allows a wide variety of electronic musical instruments, computers and other devices to connect, interface and communicate with one another.
There are two main ways in which Midi is used for show control, and these are Midi Musical Notes and Midi Show Control. For the purpose of this manual I will explain the difference between these actions.
Midi Musical Notes
Midi Musical Notes carry event messages that can specify a wide array of actions, such as note, pitch, velocity, panning, etc. It is worth mentioning now, that Midi doesn NOT carry any show media information, such as audio files or video files, but only carries the information to execute these files.
Midi Show Control
Midi Show Control (MSC), a significant real time system exclusive extension of Midi. MSC enables all types of entertainment equipment to easily communicate with each other for the purpose of show control. MSC messages are transmitted in the same way that Midi Notes are, and are completely compatible with all types of midi hardware. Modern MSC devices now use Ethernet communications for higher bandwidth. MSC messages are more likely to take the form of conventional theatrical cues, such as GO, PAUSE and STOP.
Fundamentally, both Musical Midi Notes and Midi Show Control are both acceptable forms of show control and both can be used to trigger an Midi enabled device within your show control system.