New Athenaeum
All lanterns are supplied in working order with hook clamps, wing nuts and safety chains/ bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults and damages to the Venues Team. All lanterns with the note below have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.
Moving Heads
VL1000tsd
The VL1000tsd (tungsten/shutter/dimmer) is a powerful 1000w profile with motorized zoom, full colour pallette, versatile rotatable shutters and gobos, internal electronic and mechanical dimming. Weighs 32kg. (this unit requires a 2 person lift for safety)
4 in stock. Contact Venues Team to ensure availability. Normally allocated to the New Athenaeum but can be available elsewhere if not required. Not advisable for use in the Chandler due to size and operational noise.
Profiles
Source Four 14 Degree
4 in stock
Weight: 8.8kg
Source Four 19 Degree
20 in stock
Weight: 6.3kg
Source Four 26 Degree
20 in stock
Weight: 6.3kg
Source Four 36 Degree
20 in stock
Weight: 6.3kg
Source Four 50 Degree
10 in stock
Weight: 6.3kg
Source Four 70 Degree
6 in stock
Weight: 7.9kg
Source Four 15°-30°
10 in stock
Weight: 9.5kg
Source Four 25°-50°
10 in stock
Weight: 8.5kg
Source Four 15 - 30 degree lens tube for LED engine back
please contact venues team if you would like to change the lens tubes.
4 in stock
To go along with the source 4 profiles we also have 50 gobo holders that take a size B gobo.
We also have 20 iris for the source fours.
Strand Prelude 16/30
These are for use as conductor spots only and are not to be moved
2 in stock
Fresnels + PCs
750w Source 4 Fresnel
Weighs 6.1kg
all Fresnels come complete with barndoors and colour frame 
2000w CCT starlette Fresnel
Only 11 barndoors are available for these units
12 in stock
Weight: 11.3kg
ADB CH50 5000w Fresnel
1 in stock
Weight: 11.9kg
Beamlights
Par64 Parcans
(various beam size)
30 in stock
Weighs 1.92kg
All Parcans have a bonded colour frame
See the Lantern Prep section for how to tell the difference between PAR lamps.
PLEASE NOTE - We have a variety of PAR 64 lamps - we may not have all of the same lamps that you require for your show.
Par 64 Short nose Parcan
(various beamsize)
2 in stock
Weighs 1.71kg
Source 4 PAR
(Various beamsize, interchangeable lenses)
50 in stock
There are 13 Barn Doors available for these lanterns
Weighs 3.4kg
All S4 Pars have a bonded colour frame
This is a good guide about how to change Source 4 Par Lenses, and how to tell the different types. Limited barndoors availiable for these units
Source 4 PARNEL 
6 in stock
Weighs 3.6kg
All S4 Parnels have a bonded colour frame
Floods
1000w Selecon LUI asymmetric flood
12 in stock
1000w Strand Coda. Weighs 4.3kg
20 - flood bar units only
THESE CODA'S ARE LOCATED ON THE FLOOD BAR AND MUST NOT BE REMOVED WITHOUT PERMISSION
1000w CCT Starlette 4 way compartment floods. Weighs 24.5kg
4 in stock
1000w Orion 4 Way Groundrow (floor only) Weighs 14.5kg
8 in stock
Note - These use special "feeder cables" to 32a
Follow Spots
2 Robert Juliet Korrigan 1200W HMI with Ballast, complete with 6 frame colour changer
Beam angles
Below is a quick guide to callculating the throw of lanterns.
Hazers and Smoke Machines
Le Maitre MVS Hazer
The Multi Venue System (M.V.S) has a variable high output haze with whispers to 80cc/hr, twin variable high output haze projection fans and 90 degree electronically variable haze output direction. It features four channel DMX512, combined control functions and DMX receiver.
The MVS has a higher power air pump and advanced fan motor control for wide range operation. It’s larger diameter hazing tube doubles the effective area and increases its working life span, and makes cleaning easier.
The MVS is arc bonded, shielded and has a heavy duty thermo-couple sensor. It also has data storage capability.
FEATURE LIST
Variable high output haze: whisper to 80cc/hr (double existing Neutron).
Twin variable high output haze projection fans.
90 degree electronically variable haze output direction.
4 Channel DMX 512.
3 digit led display multifunction control panel.
Combined control functions and DMX receiver.
Data storage capability.
Simplified high current control using computer inrush control.
Higher power air pump.
Electronic Haze output angle control.
Advanced fan motor control for wide range operation.
Higher output controllable haze.
Larger diameter hazing tube 3.3mm (2.4mm) doubles effective area for increase in working life span, and easier cleaning.
Arc bonded, shielded and heavier duty thermo-couple sensor.
External Bottle design allows for multiple position use.
Clip-on bottle carrier for easy transport (Bottle carrier is OPTIONAL).
No oil residue.
Continuously variable fan output up to 125 cubic metres per hour.
1 in stock
Jem ZR44 Smoke Machine
The Jem ZR44 Hi-Mass™ is a reliable and highly efficient fogger capable of precise fog delivery from subtle to massive. Ideal for a variety of settings from small venues to huge stadiums and arenas, it features advanced technology for top-quality performance, as well as advances in digital functionality such as RDM compatibility.
1200 m³/min fog output
Continuous output
1800 W heat exchanger
7.5 min heat-up time
Floor standing or truss mounting
Neutrik PowerCon connector
Indirect Fluid Sensing System
Proprietary Pro Steam Simulation fluid solution
Different fluid options for different applications
Leaves no oil residue on light fixtures
Tough and solid design
3 & 5 pin DMX interface
Prepared for multifunctional digital remote
RDM capableSoft Start technology
2 in stock
Control
Control in this venue is normally the GrandMA (Fullsize). More details here
DMX goes directly to the chilli dimmers from the Ath control room. There is also a line to the gods (labelled "To Patchbays") which then goes to the promptside flys. There are 1u splitter units at each of these locations.
Houselights are on channels 221 through 224. If the desk is powered up + plugged in it will override the chilli system. Be aware of this!
Cabling
Socapex
Mulitcore Lengths
2x 5m
5x 10m
1x 13m
6x 15m
1x 19m
6x 20m
1x 30m
1x 36m
Total Socapex Length: 370m
N.B. There is also one 15m hard-wired Multicore that is not Socapex
Tails+Spiders
Spiders/Break-ins
17x 800mm (Short)
1 x 1800mm (Long)
Tails/Break-outs
8x 800mm (Short)
1x 1500mm (Mid)
2x 1800mm (Long)
N.B. As mentioned there is one Multicore where the spiders and tails are hard-wired into the cable
Internally Wired Bars (IWBs)
All IWBs are wired to 15A connections and cannot be changed.
4x Short Black - 6 Circuits each
3x Long Silver - 6 Circuits each
1x Long Silver - 12 Circuits
1x Long Silver - 9 Circuits (Three circuits non-operational)
TOTAL IWB Circuits:64
CEE Form
Single Phase 1Φ
16A
2x 2m
1x 3m
1x 5m
4x 7m
2x 10m
1x 13m
2x 15m
1x 17m
Total Length: 120m
32A
4x 20m
N.B. If the ground rows are in use with the Back Projection Screen then these are used to extend the ground row multicore
63A
1x 6m
Jumps
15A - 32A
1x 2m
1x 5m
32A - Groundrow
2x 3m
16A - 13A
1x 2m (Single Way)
1x 1m (4 Way)
Three Phase 3Φ
32A 3Φ
1x 6m
15A TRS
| 2x 0.8m | 9x 4.5m | 5x 9m | 1x 20m |
| 12x 1m | 21x 5m | 5x 9.5m | |
| 5x 1.5m | 1x 5.5m | 30x 10m | |
| 25x 2m | 2x 6m | 1x 11.5m | |
| 35x2.5m | 1x 6.5m | 1x 12m | |
| 14x 3m | 3x 7m | 1x 12.5m | |
| 2x 3.5m | 1x 8m | 1x 13m | |
| 6x 4m | 1x 8.5m | 3x 15m |
TOTAL Length: 945.1m
TOTAL Count: 188