Chandler Sound
The sound reinforcement system in the Chandler can be very versatile, there are NL2 speaker points in varying places around the venue so speakers can be positioned where needed for specefic shows.
Speakers
Tannoy V12
Specifications
Recommended amplifier power: 200 W - 400 W / 8 ohm.
Sensitivity: 97 dB / 2.83 V @ 1m (anechoic) / 100 dB / 2.83 V @ 1m (half space).
Nominal impedance: 8 ohm.
Frequency response: 70 Hz - 25 kHz.
Power Handling (RMS/Programme): 200 W / 400 W.
Driver type: 12" (300mm) Constant Directivity Dual Concentric™.
Dispersion: 90 degrees conical.
Crossover Frequency: 1.4 kHz.
Enclosure type: 15mm birch plywood, vented.
Dimensions: 486mm x 370mm x 375mm (19.3" x 14.57" x 15.15")
Recessed rear carrying handle.
Blanking plate to allow insertion of 35mm pole mounting socket.
8 x M10 flying inserts.
8 x M10 bracket inserts
Weight: 20 kg (44 lbs).
Finish: Black textured paint.
Tannoy T40r
2 in stock
Technical Specifications
Frequency Response.....36Hz-160Hz +/-3dB
Recommended Amplifier Power.....300 to 600W RMS (8 Ohm)
Power Handling.....300W (Average)...600W (Programme)...1200W (Peak - 10mS)
Nominal Impedance.....8 Ohms
Sensitivity.....96dB / 1W @ 1m
Distortion.....Not Specified
Dispersion.....Omnidirectional
Crossover Frequency.....Recommended 100Hz - 175Hz
Control
Yamaha LS9 Digital Console
1 Permanently Installed to Chandler System
LS9 Studio Manager Download Page
Amplification
Crown Micro Tech 2400
4 in stock, installed permanently in control room rack.
Crwon Micro Tech Operation Manual
==System Control==
Tannoy TX2 System Controller