Stage Hardware

From paperclip
Jump to navigation Jump to search

ALL Stage Hardware Updated August 2020

Hard Black Masking

Hard Black Masking

Track

Track

Genie Trap

Genie Trap

Scaffolding Pipe

Scaffolding Pipe

Kee Clamp & Scaff Clamp

Kee Clamps are primarily a handrail product, but can be used in a variety of ways. Structures are built by inserting a scaffold tube into one of a variety of joiners and tightening a grub screw onto the scaffold tube with a hex key.

Straight Joiner (coupler) 6

Swivel Socket Flange (90") 13

Swivel Socket Flange (180") 2

Single Swivel Socket - 1

Rail Support - 1

Misc. Kee Clamps - 9

Kee Clamp Scaff Foot

Half - 9

Full - 12

Joint Pins - 12

Scaff Clamp

Scaffold clamps are a means of joining scaffolding tube together to make scaffolding. Generally, these come in two types, swivel and 90 degrees. Gravlocks are for securing scaffolding pipe to I or C Beams and must be used in pairs on either side of an I Beam or on opposing C or I Beams.

Swivel - 56

90 Degree - 14

Gravlock - 23

Flying Weights

Full Weights 12kg - 600

'Half' Weights 7.5kg - 50

Stage Weights

Stage Weights - 22

Ratchet Straps

Total Ratchet Straps - 25

Ratchet with hook - 3

Strap with hook - 3

Ratchet with Black Handles- 5

Straps with Buckles- 4

Full Ratchet Straps - 5

Ratchets with Triangle Hook - 2


Fixings

Most of our fixings are located in the cage on the parts bin trolley or the smaller parts bin on the workbench. Screws are located within the toolboxes and if they run out, more can be requested from TSD staff.

Nuts & Bolts

Our stock level for Nuts & Bolts is ever-changing, but we try to always hold stock in the following.

Each size is listed as it appears in its parts bin in the cage.

Hex Bolts (Including set screws)

M12 - 20-25mm, 30-35mm, 40-45mm, 50-55mm, 60-75mm, 80-100mm, 120mm+

M10 - 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 80mm, 100mm, 120mm+

M8 - 20-25mm, 30-35mm, 40-45mm, 50-60mm, 65-75mm, 80-100mm

M6 - 20-25mm, 30-35mm, 40-45mm, 50-55mm, 60-65mm, 70mm+

Machine Screws

M4 Countersunk Pozi 2 Head - 30mm

M5 Countersunk Pozi 2 Head - 40mm

M6 Countersunk Pozi 3 Head - 20mm, 30mm, 40mm, 50mm

Nuts & Inserts

Hex Nuts - M12, M10, M8, M6, M4

Nylocs (locking nuts) - M12, M10, M8, M6, M5

Wingnuts - M12, M10

T-Nuts - M10, M8, M6, M5

Threaded Inserts - M10, M8

Washers

Standard washers - M12, M10, M8, M6, M4

Mudguard Washers - M10, M8, M6

Square Washers - M12, M10

Spring Washers - M12

Screws

We hold two different diameters of screws, 4mm and 5mm. These are all driven using a POZI 2 bit and we have these in the following lengths:

4 x 16mm, 4 x 20mm, 4 x 25mm, 4 x 30mm, 4 x 35mm, 4 x 40mm, 4 x 45mm, 4 x 50mm, 4 x 60mm, 4 x 70mm

5 x 30mm, 5x 50mm, 5 x 70mm, 5 x 100mm

Coach Screws

We have an assortment of coach screws from 6mm to 10mm in diameter and from 50mm to 100mm in length.

Hinges

We have 4 different Hinge types in stock, they are:

Flints Opera Pin Hinges

Flints Exhibition Pin Hinges

Pin Hinges

Back-flap Hinges