CPP3 Collobrations 2018
CPP3 Collaborations 2018
Performance dates
Imperium - 17th of May 2018 Fly Trap - 22nd of May 2018 Water voice - 25th of May 2018
Production Team
Production Manager - Colin Bell and Kevin Murray
Lighting Designer - Simon Alex McEwan
Stage Manager - Kirstie Connel
Assistant Stage Managers on book - Peter Goddard
Production Electrician- Andrew Johnston
Technical Stage Manager- Regan Kelly
Assistant Technical Stage Managers- Nele Hahnsen and Dale Gibb
Sound 1 and AV - Callum Farrell
Production Lighting Support - Jazz Hutsby
Lighting Programmer and Op - Rhys James Gaughan
Stage Management -
Being a stage manager on the CPP3 Performances the main responsibilities are risk assessments, time management and communication. You have to make sure that everyone is kept up to date with changes to the performances throughout the rehearsal process but also during production weeks. Sourcing props is mainly done by the performers unless they need something that is more challenging to source for example straw or wooden swords etc.
A helpful way to keep every department up to date throughout rehearsals is to create a tech bible. This document should contain all the information for each department as well as an explanation of each performance. (I have attached the ones created for each performance below).
Tech Bibles
Imperium - File:Group A Technical Bible V5.pdf
FlyTrap - File:CPP3 Collaborations Group B Tech Bible.pdf
What a Voice - File:CPP3 Collaborations Group C Tech Bible V4.pdf
Props Makes
One prop which needed to be made for one of the CPP shows was roman wooden swords.
Step one: Create a wooden template for the blade and include a cross shaped handle at the bottom.
Step Two: Take an old roller paint brush and unattach the roller until you are just left with the handle. Slide the paint brush handle over the wooden handle on the sword. This will give you a round handle for the sword and will be easier for cast to grip.
Step Three: Sand off all the edges until smooth and make sure the tip of the sword is blunted down as well.
Step Four: Get some tin foil and wrap around the blade of the sword. This will make the blade a metal look and will reflect any light. Make sure the tin foil does not crease when wrap it.
Step Five: Get some black sports tape and cover this around the handle. This allows for better grip and comes in a variety of colours.
Step Six: Use varnish or hair lacquer and use it on the tin foil blade. This will help to stop the tin foil from ripping.