Chandler Sound
The sound reinforcement system in the Chandler can be very versatile, there are NL2 speaker points in varying places around the venue so speakers can be positioned where needed for specefic shows.
Speakers
Tannoy V12
4 in Stock
Specifications
Recommended amplifier power: 200 W - 400 W / 8 ohm.
Sensitivity: 97 dB / 2.83 V @ 1m (anechoic) / 100 dB / 2.83 V @ 1m (half space).
Nominal impedance: 8 ohm.
Frequency response: 70 Hz - 25 kHz.
Power Handling (RMS/Programme): 200 W / 400 W.
Driver type: 12" (300mm) Constant Directivity Dual Concentric™.
Dispersion: 90 degrees conical.
Crossover Frequency: 1.4 kHz.
Enclosure type: 15mm birch plywood, vented.
Dimensions: 486mm x 370mm x 375mm (19.3" x 14.57" x 15.15")
Recessed rear carrying handle.
Blanking plate to allow insertion of 35mm pole mounting socket.
8 x M10 flying inserts.
8 x M10 bracket inserts
Weight: 20 kg (44 lbs).
Finish: Black textured paint.
Tannoy T40r
2 in stock
Technical Specifications
Frequency Response.....36Hz-160Hz +/-3dB
Recommended Amplifier Power.....300 to 600W RMS (8 Ohm)
Power Handling.....300W (Average)...600W (Programme)...1200W (Peak - 10mS)
Nominal Impedance.....8 Ohms
Sensitivity.....96dB / 1W @ 1m
Distortion.....Not Specified
Dispersion.....Omnidirectional
Crossover Frequency.....Recommended 100Hz - 175Hz
Dimensions (HxWxD).....665mm (26.2") x 440mm (17.3") x 435mm (17.1")
Control
Yamaha LS9 Digital Console
1 Permanently Installed to Chandler System
LS9 Studio Manager Download Page
Monitoring
Fostex 6301B
2 Fostex 6301B permanently installed in the control room
Fostex 6301B Overview
Amplification
Crown Micro Tech 2400
4 in stock, installed permanently in control room rack.
Crwon Micro Tech Operation Manual
System Control
Tannoy TX2 System Controller
'1 in stock, permanently installed in the control room amp rack
TX2 User's Manual
Playback/Recording
CD Playback
Denon DN-D4000
1 in stock, permanently installed in the playback/recording rack.
DN4000 Operating Instructions
Mini Disc Playback
Denon DN-M2300R
1 in stock, permanently installed in the playback/recording rack.
M2300R Operating Instructions
DAW Hardware
1 Focusrite Pro 40 in FOH rack
Saffire PRO 40 features a versatile 20 inputs and 20 outputs, including a complement of eight Focusrite mic preamps guaranteed to get the best out of any microphone, with minimal noise and distortion even at high gain. Two mic/line/instrument inputs are accessed via the front panel, which also provides two independent headphone monitor outputs.
This interface is best used with Safire Mix Control which can be downloaded here.
It is also important to note that due to the product interfacing via the Firewire 40 protocol, your playback machine must have either a firewire port or an adaptor.
It is also imperative that both the interface and the playback computer be fully switched off before connecting or disconnecting, as 'Hot-plugging' can cause irreversible damage to both the interface and the playback computer.