Spinning Disc: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The RSAMD pantomime in 2007 included a vinyl disc,4.5 meters in diameter, as a show piece. This was to spin when in and then fly out. The structure and mechanism were designed and constructed by [[Peter Strain]] | |||
The RSAMD pantomime in 2007 included a vinyl disc,4.5 meters in diameter, as a show piece. This was to spin when in and then fly out. The structure and mechanism were designed and | |||
| Line 10: | Line 9: | ||
== The solution == | == The solution == | ||
The construction of the piece was looked at in two parts. a wooden and canvis frame, forming the disk, and a metal back frame to house the mechanism. the two were joined by steel plates that each have interlocking spindles. these plates were separated and bolted onto the two frames | The construction of the piece was looked at in two parts. a wooden and canvis frame, forming the disk, and a metal back frame to house the mechanism. the two were joined by steel plates that each have interlocking spindles. these plates were separated and bolted onto the two frames. | ||
<gallery> | <gallery> | ||
Image:motor and chain.jpg | Image:motor and chain.jpg | ||
Revision as of 12:05, 15 January 2008
The RSAMD pantomime in 2007 included a vinyl disc,4.5 meters in diameter, as a show piece. This was to spin when in and then fly out. The structure and mechanism were designed and constructed by Peter Strain
Requirements
The disk was to spin on its own accord and fly out.the mechanism would have to be on the back as there was no detail like a stylus arm to hide any mechanical parts on the front of the flat. equipment used had to me slim enough not to get caught on the gauze hanging behind it.
The solution
The construction of the piece was looked at in two parts. a wooden and canvis frame, forming the disk, and a metal back frame to house the mechanism. the two were joined by steel plates that each have interlocking spindles. these plates were separated and bolted onto the two frames.
