Into The Woods 2023: Difference between revisions
No edit summary |
No edit summary |
||
Line 114: | Line 114: | ||
'''Power''' | |||
Pit: | |||
Uses of power = 13amp and 16amp. Our DQ rack which distrobutes signal to the digico desk is powered by 16amp found in the upsatge left corner of the pit. | |||
Revision as of 11:48, 1 December 2023
.
Into The Woods 2023 | |
---|---|
Summary | |
Dates 4th - 9th December 2023
| |
Location New Athenaeum
| |
Creative Team | |
Director | |
Designer | |
Lighting Designer | |
Sound Designer | |
Video Designer | |
Production Team | |
Stage Supervisor | |
Deputy Stage Supervisor | |
Stage Manager | |
Deputy Stage Manager | |
Assistant Stage Manager | |
LX Programmer | |
PLX | |
Technical Stage Technicians | |
Sound 2 | |
PSE |
Overview
Technical Stage Department
Iris Effect
Moon
Ground Plans
Sound
Design
Comms
To connect our wired and wireless comms
- 3 Pin XLR out of wired comms basestation to in house patch
- From in house patch, XLR to 4-wire, into wireless comms basestation
To get wireless control pad
- Wireless basestation network settings
- Connect to basestations wifi
- Enter IP address in browser
Our settings
Meant that all wireless comms were constantly on B ring for our 'stage ring', but are still able to hear the DSM's show call.
Everyone on wired comms on A ring and are unable to hear wireless B ring.
B ring on wired comms was available too, separate wireless B ring, but are unable to hear the DSM.
Hollyland Solidcom C1 HUB8S Control Pad
A Group - Default B Group - Default
A Group - Changed B Group - Changed
Power
Pit: Uses of power = 13amp and 16amp. Our DQ rack which distrobutes signal to the digico desk is powered by 16amp found in the upsatge left corner of the pit.