Les Enfants Terribles: Difference between revisions

From paperclip
Jump to navigation Jump to search
Ejohnstone (talk | contribs)
Ejohnstone (talk | contribs)
Line 55: Line 55:


The main element of the set in this production was a white sharks tooth gauze(8x12). The gauze was hung beneath the catwalk, directly above the balcony, and draped halfway down the stage. The gauze was custom ordered from JD Mcdougall to be 1 drop of their stock (8 meters) material wide and 12 meters long.  
The main element of the set in this production was a white sharks tooth gauze(8x12). The gauze was hung beneath the catwalk, directly above the balcony, and draped halfway down the stage. The gauze was custom ordered from JD Mcdougall to be 1 drop of their stock (8 meters) material wide and 12 meters long.  
The gauze was hauled out by hand between scenes and rested on the balcony floor. The bar it was hung from was intended to be a flying bar, per the directors request. This allowed for adjustment in the gauze down the depth of the stage.
The gauze was hauled out by hand between scenes and rested on the balcony floor. The bar it was hung from was intended to be a flying bar, per the directors request. This allowed for adjustment in the gauze down the depth of the stage.
The 8 meter wide bar was made of 2 4 meter staff bars connected in the centre, then connected to 4 black 11 mm climbing lined through barrel clamps and shackles. Each line ran through a pulleys and diverted to the USL balcony where I had set a cleat to hold the bar. The SR line used 4 pulleys, the CSR used 3,CSL used 2 and the SL used 1. However this meant that the pulleys were hung in groups in places, the SL rigging point became too crowded and the pulleys could not function properly, so the decision was made during the fit up to add a rigging plate. To evenly space the pulleys out and allow them all to hang in the correct orientation and function properly.  


<pdf>LET Kit List.pdf</pdf>
'''Masking'''
<pdf>LET Stage Supervisor Running List.pdf</pdf>
 
As the opera was being filmed in place of hosting an audience the seating bank was kept retracted in the venue. It was requested that the seating bank be covered for filming purposes. The seating bank is 6 meters tall and 9 meters wide. The 9 meter bar (1 x 4 meter and 1 x 5 meter) was connected through barrel clamps, shackled directly to slings which are wrapped around the square upright structural supports of the DS catwalk. As the seating bank is 9m wide I hung one half tab (8mX8m) centred on the bar and framed it either side with a pair of soft legs (4mx8m).
As rehersals progressed it was decided that the DSM would call the show from the Booth on the 3rd floor, the window of which was covered by the masking, to combat this, I added 2m drifts between the barrel clamps and strops effectively lowering the black masking.


== Lighting ==
== Lighting ==

Revision as of 23:47, 13 November 2021



Les Enfants Terribles
Summary
Filming
10th - 12th November 2021
Location
AGOS
Creative Team
Director
Lynne Taylor
Designer
Anna Orton
Lighting Designer
David Cunningham
Production Team
Production Manager
Elle Taylor
Stage Manager
Avalon Hernandez
Deputy Stage Manager
Assistant Stage Managers
Stage Supervisor
Lighting Programmer and Operator
Production Electrician
Lighting Technician

Summary

Company

Technical Stage Department

The Gauze

The main element of the set in this production was a white sharks tooth gauze(8x12). The gauze was hung beneath the catwalk, directly above the balcony, and draped halfway down the stage. The gauze was custom ordered from JD Mcdougall to be 1 drop of their stock (8 meters) material wide and 12 meters long. The gauze was hauled out by hand between scenes and rested on the balcony floor. The bar it was hung from was intended to be a flying bar, per the directors request. This allowed for adjustment in the gauze down the depth of the stage. The 8 meter wide bar was made of 2 4 meter staff bars connected in the centre, then connected to 4 black 11 mm climbing lined through barrel clamps and shackles. Each line ran through a pulleys and diverted to the USL balcony where I had set a cleat to hold the bar. The SR line used 4 pulleys, the CSR used 3,CSL used 2 and the SL used 1. However this meant that the pulleys were hung in groups in places, the SL rigging point became too crowded and the pulleys could not function properly, so the decision was made during the fit up to add a rigging plate. To evenly space the pulleys out and allow them all to hang in the correct orientation and function properly.

Masking

As the opera was being filmed in place of hosting an audience the seating bank was kept retracted in the venue. It was requested that the seating bank be covered for filming purposes. The seating bank is 6 meters tall and 9 meters wide. The 9 meter bar (1 x 4 meter and 1 x 5 meter) was connected through barrel clamps, shackled directly to slings which are wrapped around the square upright structural supports of the DS catwalk. As the seating bank is 9m wide I hung one half tab (8mX8m) centred on the bar and framed it either side with a pair of soft legs (4mx8m). As rehersals progressed it was decided that the DSM would call the show from the Booth on the 3rd floor, the window of which was covered by the masking, to combat this, I added 2m drifts between the barrel clamps and strops effectively lowering the black masking.

Lighting

Stage Management