Miscellaneous LX sundries

Ladders

6 x Wire Rope Lighting Ladders

Total Hanging Length - 3m
Rung Width - 1m (1000mm)
Height Increments - 300mm
Top Steel Ends - Screwgate Hook/Karabiner
Bottom Steel Ends - Thimble Splice
SWL - 500kg
Standard setup is 4 rungs per ladder - we have 24 rungs total

• 
• 
• 

https://www.ropeassemblies.co.uk/products/manufactured-assemblies/lighting-ladders/

Half Coupler

• 
• 

21 in stock - update 17/08/20
19 x Black and 2 x Silver -- SWL 100kg -- Uses M10 Bolt set

Unitrack FoH fittings

40 in stock - NB Uses M12 Bolt to mount lantern to TrackTamer

• 

UniTrack Safety attachment for lanterns 30 in stock

• 
• 

Boom Arms

• 

41 in stock

• 

Boom Arm with safety bond attachment point - Stock x 11 - USE THESE FIRST when rigging booms, or use these for units above head height

• 

Standard Boom Arm - Stock x 30 - Use for low units

---

Mirrorballs

1 x Large Mirror ball is currently available with a rotating mirror ball motor

2 x Small 40cm diameter mirror ball - no rotator

LED Tape Decoders

City Theatrical Qolorflex 24 x 3a - 12volt to 24volt input, 24 channels by 3 amps per channel. Housed in 8u rackmount flight case with 12v or 24v powersupplies built in. Unit has 6 x 5pin XLR outputs for 6 ways of RGBW colour control
www.https://www.citytheatrical.com/products/qolorflex-24x3a-dimmer

Qnty - 1

• 

Cable extension stock:
5 x 5m 5pin RGBW
6 x 10m 5pin RGBW
1 x 15m 5pin RGBW
6 x 5pin Plug to Pheonix connector for connection to bare ends on tape




B078XS2SKH decoder - 12volt to 24volt input, 4 channels by 5 amps per channel

Qnty - 8

• 
• 
• 

LT-8030 Decoder - 5v to 24v, 3 channels by 4 amps per channel

Qnty - 1

• 
• 

Decoder - 9v to 24v - 3 channels by 4 Amps per channel

Qnty 1

PX24500D Decoder - 12v to 24v - 4 Channel by 5amps per channel

Qnty 3

LED Power Supplies

Meanwell 12v LPV-100-12 100watt 12volt power supply unit

Qnty - 9

Triac Dimmable Constant Voltage LED Driver

30watts at 24volts

Qnty 2

This is a PSU that you can dim via a normal dimmer to dim 24v LED products without needing a DMX decoder

Tagra Orion-D-48/24v Triac Dimmable Constant Voltage LED Driver 48 watts at 24volts

This is a PSU that you can dim via a normal dimmer to dim 24v LED products without needing a DMX decoder

LED Tape

12v RGB+ WW & CW (also called RGB + CCT) - NOT CUTTABLE - lengths currently available:
6 x 0.5m
6 x 0.75m
6 x 1m
6 x 2m

12v RGB+WW double row tape - encased in silicone - in 1m lenghts - NOT cuttable

qnty - 6 x 1m length

12v RGBWW IP65 tape - silicone encased - RGB plus a WW separate chip - 5m lenghts - NOT cuttable

qnty 5 x 5m reel

12v RGB IP65 tape - silicone encased - in 5m lengths on reels - NOT cuttable

qnty 3 x 5m reel

12v RGB IP65 tape - silicone encased - RGB in 2m lengths - cuttable

Qnty 12 x 2m section

12v RGB IP65 cuttable tape - currently in 2m sections

Qnty 3 x 2m section

24v RGBWW - IP56 splash proof - cuttable to specific lengths - current stock 4m white plastic reel

Qnty 1 x 4m reel

24v RGBWW - IP56 splash proof - NOT cuttable on BLACK plastic reel

Qnty 1 x 3m reel

Mini strobe

1 Strobe QK75S

Fairy Lights

11 x 7.5m white string (3 pin interlinking cable) - REQUIRES PURCHASE OF 24V PSU from "Lights for Fun"

4 x 9m long white string with 14 drop strands 2.5m length - c/w 13a plug adapter

Festoon

15m Length - 50cm lamp spacing x 4

10m Length - 50cm lamp spacing x 1

10m Length - 75cm lamp spacing x 2

8m Length - 75cm lamp spacing x 1

Neon Flex - 50cm batten

5 x 0.5m length of white Neon flex mounted on timber as short batten type light source - Requires 24Volt driver

Blue Hanging Fluorescent

4 x 1m Hanging Fluorescent light fitting - essentially blue gelled fluorescent fitting - c/w hanging loop for verticle hanging, inline switch, and 13a plug

LED Tape Fluorescent Fittings

4 x 1150mm LED tape based Fluoro fitting. Has RGB + Cold White tape that is frosted/diffused to try and mimic a fluorescent tube. Tape is 12v @ 12.2w p/M so approx 15w per tube.