Stage Hardware

ALL Stage Hardware Updated August 2020

Hard Black Masking

Hard Black Masking

Track

Track

Genie Trap

Genie Trap

Scaffolding Pipe

Scaffolding Pipe

Dog Leg Pipe

We have 8 in total, which are side-specific. 4 SL and 4 SR

Each dog leg measures 3m Onstage by 1.5m Downstage

Kee Clamp & Scaff Clamp

Information about Kee Clamp & Scaff Clamps can be found in the Flints Catalogue

Kee Clamps (or Hex Key Tube Fittings) are primarily a handrail product, but can be used in a variety of ways. Structures are built by inserting a scaffold tube into one of a variety of joiners and tightening a grub screw onto the scaffold tube with a hex key.

Straight Joiner (coupler) 6

Swivel Socket Flange (90") 13

Swivel Socket Flange (180") 2

Single Swivel Socket - 1

Rail Support - 1

Misc. Kee Clamps - 9

Kee Clamp Scaff Foot

Half - 9

Full - 12

Joint Pins - 12

Scaff Clamp

Scaffold clamps are a means of joining scaffolding tube together to make scaffolding. Generally, these come in two types, swivel and 90 degrees. Gravlocks are for securing scaffolding pipe to I or C Beams and must be used in pairs on either side of an I Beam or on opposing C or I Beams.

Swivel Couplers - 56

90 Degree (Fixed Right Angle Coupler) - 14

Gravlock - 23

Flying Weights

Full Weights 12kg - 600

'Half' Weights 7.5kg - 50

Stage Weights

Stage Weights - 22

Ratchet Straps

We have a transient stock of ratchet straps in 1" and 2" width, that come in both endless and hook ended.

This stock lives between the cage, grid and the workshops.

Fixings

Most of our fixings are located in The Cage on the Hardware Trolley or the Small Parts Bin on the workbench. Screws are located within the toolboxes and if they run out, more can be requested from TSD staff.

Nuts & Bolts

Our stock level for Nuts & Bolts is ever-changing, but we try to always hold stock in the following.

Each size is listed as it appears in its parts bin in the cage.

Hex Bolts (Including set screws)

M12 - 20-25mm, 30-35mm, 40-45mm, 50-55mm, 60-75mm, 80-100mm, 120mm+

M10 - 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 80mm, 100mm, 120mm+

M8 - 20-25mm, 30-35mm, 40-45mm, 50-60mm, 65-75mm, 80-100mm

M6 - 20-25mm, 30-35mm, 40-45mm, 50-55mm, 60-65mm, 70mm+

Machine Screws

M4 Countersunk Pozi 2 Head - 30mm

M5 Countersunk Pozi 2 Head - 40mm

M6 Countersunk Pozi 3 Head - 20mm, 30mm, 40mm, 50mm

Nuts & Inserts

Hex Nuts - M12, M10, M8, M6, M4

Nylocs (locking nuts) - M12, M10, M8, M6, M5

Wingnuts - M12, M10

T-Nuts - M10, M8, M6, M5

Threaded Inserts - M10, M8

Washers

Standard washers - M12, M10, M8, M6, M4

Mudguard Washers - M10, M8, M6

Square Washers - M12, M10

Spring Washers - M12

Screws

We hold two different diameters of screws, 4mm and 5mm. These are all driven using a POZI 2 bit and we have these in the following lengths:

4 x 16mm, 4 x 20mm, 4 x 25mm, 4 x 30mm, 4 x 35mm, 4 x 40mm, 4 x 45mm, 4 x 50mm, 4 x 60mm, 4 x 70mm

5 x 30mm, 5x 50mm, 5 x 70mm, 5 x 100mm

Coach Screws

We have an assortment of coach screws from 6mm to 10mm in diameter and from 50mm to 100mm in length.

Related Items

Wall Plugs for fixing items into walls - 6mm & 8mm

Screw Cups

Hinges

We have 4 different Hinge types in stock, they are:

Flints Opera Pin Hinges

Flints Exhibition Pin Hinges

Pin Hinges

Back-flap Hinges

Scenery Fittings

Flints have a large amount of Scenery Fittings. Many of these have more than one use, so becoming familiar with these will help you when you encounter technical challenges. This stock floats between the cage and the workshop and usually contains some of the following:

Cleats & Clummets

Screw Eyes

Ring Plates

Small Brackets

Large Brackets

Boss Plates

Stud Plates

Pelmet Clips

Flush Plates

Button Pelmet Clips

Bolt Plates

Miscelaneaous Items

Magnetic Door Catches

Split Rings

Slit Pins S, M, L

Assorted R-Clips

Panel Pins - 15mm, 20mm

Scaffold Grub Screws

Dowel Pegs - 10mm

Curtain Hooks

Picture Hooks & Hangings