Chandler: Difference between revisions
Line 116: | Line 116: | ||
Houselights are | Houselights are addressed to dimmer 126. There is also a chilli system in place. Workers are controlled from the DSR Breaker board. | ||
== 15A TRS == | == 15A TRS == |
Revision as of 12:46, 16 October 2017
All lanterns are supplied in working order with hook clamps, wing nuts and safety bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults or damages to the Venues Team.
All lanterns have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.
Profiles
ETC S4 jr Zoom 575w 25/50
Weighs 4.5kg
All S4's have a safety bond attached
Complete with 14 bonded colour frames
Fresnels
Selecon Acclaim F 650w 6/60
Weighs 3.3kg
All Acclaim F's have a safety bond attached
Complete with 23 bonded barndoors and 15 bonded colour frames
PCs
Selecon Acclaim PC 650w 4/64
Weighs 2.8kg
All Acclaim PC's have a safety bond attached
Complete with 23 bonded barndoors and 15 bonded colour frames
Beamlights
Parcan (PAR 64) 1000w various lens options
PLEASE NOTE - We have a variety of PAR 64 lamps - we may not have all of the same lamps that you require for your show.
Weighs around 2kg (depends on lantern)
All Parcan's have a safety bond attached
Complete with 14 bonded colour frames
floods
Strand Coda 4 500w
Weighs 11kg
Hazers and Smoke Machines
Le Maitre MVS Hazer
The Multi Venue System (M.V.S) has a variable high output haze with whispers to 80cc/hr, twin variable high output haze projection fans and 90 degree electronically variable haze output direction. It features four channel DMX512, combined control functions and DMX receiver.
The MVS has a higher power air pump and advanced fan motor control for wide range operation. It’s larger diameter hazing tube doubles the effective area and increases its working life span, and makes cleaning easier.
The MVS is arc bonded, shielded and has a heavy duty thermo-couple sensor. It also has data storage capability.
FEATURE LIST
Variable high output haze: whisper to 80cc/hr (double existing Neutron).
Twin variable high output haze projection fans.
90 degree electronically variable haze output direction.
4 Channel DMX 512.
3 digit led display multifunction control panel.
Combined control functions and DMX receiver.
Data storage capability.
Simplified high current control using computer inrush control.
Higher power air pump.
Electronic Haze output angle control.
Advanced fan motor control for wide range operation.
Higher output controllable haze.
Larger diameter hazing tube 3.3mm (2.4mm) doubles effective area for increase in working life span, and easier cleaning.
Arc bonded, shielded and heavier duty thermo-couple sensor.
External Bottle design allows for multiple position use.
Clip-on bottle carrier for easy transport (Bottle carrier is OPTIONAL).
No oil residue.
Continuously variable fan output up to 125 cubic metres per hour.
1 in stock
Look Solutions Viper 2.6 Fog Machine
The Viper 2.6 is a 230 Volt, 2600 Watt high performance fog machine. The output is twice as powerful as the Viper NT. It has a built-in timer and DMX. Heat-up time is approximately 7 minutes. Pump can be adjusted in increments of 1%-99%. Continuous output when pump is set <50% and settings above 50% will yield a 40 second blast.
2 in stock
Control
ETC Eos Ti With one Multi Touch Displays
Product Features
•10,000 channels (devices)
•4,096 outputs/parameters
•Dedicated master playback fader pair
•10 definable motorized faders, with 30 pages of control
•20 user-definable buttons
•999 cue lists
•200 active playbacks
•300 submasters
•Dedicated pan/tilt encoders, four pageable encoders
•Two articulating 17” LCD multitouch displays
•Supports three external DVI/SVGA monitors; can be single- or multitouch
•High-density live and blind displays
•Virtual Media Server Control with Stock Content (user images may be imported)
•Device discovery and troubleshooting via RDM
•ETC Sensor® CEM+, CEM3™ and FDX dimmer feedback and controls
•User-definable channel and control layouts
•ETCNet3™ (ACN based), ETCNet2™, Artnet and Avab® UPD protocol output
•Integrated keyboard drawer with USB ports
•Two individually configurable network ports
•Backlit keyboard
•Multiple MIDI and SMPTE Inputs
•Client/server networking and synchronized backup
•Client and Offline programming on PC (Windows 7 or XP) and native on Macintosh (Intel only, OS X)
•Data-laundering from Obsession™, Express™, Expression®, Emphasis®, Congo®, Transtechnik NT, Avab VLC and Strand 500/300 series show files via ASCII
•12 discrete online users with partitioned control
•Two 802.af-compliant PSE Ethernet ports, individually configurable
Houselights are addressed to dimmer 126. There is also a chilli system in place. Workers are controlled from the DSR Breaker board.
15A TRS
1m x 9
2.5m x39
5m x35
10m x10
15m x1