New Athenaeum: Difference between revisions
Krobertson (talk | contribs) |
Krobertson (talk | contribs) |
||
| Line 101: | Line 101: | ||
---- | ---- | ||
'''Source 4 PAR'''<br> (Various beamsize, interchangable lenses) [[Image:SourceFourParcan.jpg|160px]]''' | '''Source 4 PAR'''<br> (Various beamsize, interchangable lenses) [[Image:SourceFourParcan.jpg|160px]]'''50 in stock''' | ||
<BR> | <BR> | ||
There are 13 Barn Doors available for these lanterns | There are 13 Barn Doors available for these lanterns | ||
Revision as of 08:27, 17 October 2013
All lanterns are supplied in working order with hook clamps, wing nuts and safety chains/ bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults and damages to the Venues Team.
All lanterns with the note below have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.
Moving Heads
VL1000tsd
The VL1000tsd (tungsten/shutter/dimmer) is a powerful 1000w profile with motorized zoom, full colour pallette, versatile rotatable shutters and gobos, internal electronic and mechanical dimming. Weighs 32kg. (this unit requires a 2 person lift for safety)
3 in stock. Contact Venues Team to ensure availability. Normally allocated to the New Athenaeum but can be available elsewhere if not required. Not advisable for use in the Chandler due to size and operational noise.
1 VL out for major service
Profiles
Source Four 14 Degree
4 in stock
Source Four 19 Degree
20 in stock
Source Four 26 Degree
20 in stock
Source Four 36 Degree
20 in stock
Source Four 50 Degree
10 in stock
Source Four 70 Degree
6 in stock
Source Four 15 - 30 Degree ZOOM
10 in stock
Source Four 25 - 50 Degree ZOOM
10 in stock
Source Four LED Daylight with 25 - 50 lens tube
6 in stock
Source Four 15 - 30 degree lens tube for LED engine back
please contact venues team if you would like to change the lens tubes.
4 in stock
To go along with the source 4 profiles we also have 50 gobo holders that take a size B gobo.
We also have 20 iris for the source fours.
Strand Prelude 16/30
These are for use as conductor spots only and are not to be moved
2 in stock
Fresnels + PCs
1200w Selecon Fresnel.
Weighs 5kg
50 colour frames and 49 barndoors
All Fresnels have a bonded colour frame and barndoor 
50 in stock
1200w Selecon PC
Weighs 6.1kg
All PC's have a bonded colour frame and barndoor 
10 in stock
2000w CCT starlette Fresnel
Weighs 11.3kg
Only 11 barndoors are available for these units
11 in stock (1 out for repair)
ADB CH50 5000w Fresnel.
Weighs 11.9kg 
1 in stock
Beamlights
Par64 Parcans
(various beamsize) 
30 in stock
Weighs 1.92kg
All Parcans have a bonded colour frame
See the Lantern Prep section for how to tell the difference between PAR lamps.
PLEASE NOTE - We have a variety of PAR 64 lamps - we may not have all of the same lamps that you require for your show.
Par 64 Short nose Parcan
(various beamsize) 
2 in stock
Weighs 1.71kg
Source 4 PAR
(Various beamsize, interchangable lenses) 
50 in stock
There are 13 Barn Doors available for these lanterns
Weighs 3.4kg
All S4 Pars have a bonded colour frame
This is a good guide about how to change Source 4 Par Lenses, and how to tell the different types. Limited barndoors availiable for these units
Source 4 PARNEL 
6 in stock
Weighs 3.6kg
All S4 Parnels have a bonded colour frame
Floods
1000w Selecon LUI assymetric flood
12 in stock
1000w Strand Coda. Weighs 4.3kg
20 - flood bar units only
THESE CODA'S ARE LOCATED ON THE FLOOD BAR AND MUST NOT BE REMOVED WITHOUT PERMISSION
1000w CCT Starlette 4 way compartment floods. Weighs 24.5kg
4 in stock
1000w Orion 4 Way Groundrow (floor only) Weighs 14.5kg
8 in stock
Note - These use special "feeder cables" to 32a
Follow Spots
2 Robert Juliet Korrigan 1200W HMI with Ballast, complete with 6 frame colour changer
Beam angles
Below is a quick guide to callculating the throw of lanterns.
Hazers and Smoke Machines
Le Maitre MVS Hazer
The Multi Venue System (M.V.S) has a variable high output haze with whispers to 80cc/hr, twin variable high output haze projection fans and 90 degree electronically variable haze output direction. It features four channel DMX512, combined control functions and DMX receiver.
The MVS has a higher power air pump and advanced fan motor control for wide range operation. It’s larger diameter hazing tube doubles the effective area and increases its working life span, and makes cleaning easier.
The MVS is arc bonded, shielded and has a heavy duty thermo-couple sensor. It also has data storage capability.
FEATURE LIST
Variable high output haze: whisper to 80cc/hr (double existing Neutron).
Twin variable high output haze projection fans.
90 degree electronically variable haze output direction.
4 Channel DMX 512.
3 digit led display multifunction control panel.
Combined control functions and DMX receiver.
Data storage capability.
Simplified high current control using computer inrush control.
Higher power air pump.
Electronic Haze output angle control.
Advanced fan motor control for wide range operation.
Higher output controllable haze.
Larger diameter hazing tube 3.3mm (2.4mm) doubles effective area for increase in working life span, and easier cleaning.
Arc bonded, shielded and heavier duty thermo-couple sensor.
External Bottle design allows for multiple position use.
Clip-on bottle carrier for easy transport (Bottle carrier is OPTIONAL).
No oil residue.
Continuously variable fan output up to 125 cubic metres per hour.
1 in stock
Jem ZR44 Smoke Machine
The Jem ZR44 Hi-Mass™ is a reliable and highly efficient fogger capable of precise fog delivery from subtle to massive. Ideal for a variety of settings from small venues to huge stadiums and arenas, it features advanced technology for top-quality performance, as well as advances in digital functionality such as RDM compatibility.
1200 m³/min fog output
Continuous output
1800 W heat exchanger
7.5 min heat-up time
Floor standing or truss mounting
Neutrik PowerCon connector
Indirect Fluid Sensing System
Proprietary Pro Steam Simulation fluid solution
Different fluid options for different applications
Leaves no oil residue on light fixtures
Tough and solid design
3 & 5 pin DMX interface
Prepared for multifunctional digital remote
RDM capableSoft Start technology
2 in stock
Control
Control in this venue is normally the GrandMA (Fullsize). More details here
DMX goes directly to the chilli dimmers from the Ath control room. There is also a line to the gods (labelled "To Patchbays") which then goes to the promptside flys. There are 1u splitter units at each of these locations.
Houselights are on channels 221 through 224. If the desk is powered up + plugged in it will override the chilli system. Be aware of this!