EChameleon

eChameleon Software

During Easter 2012 the Illusionist desk was replaced and the new eChameleon Software installed

The.pdf handbook can be found here

eChameleon Manual

And RCS specific tips and tricks below!

The How To Guide

Below is the 'How to Guide' for the Automation system, writen by students for students in hopefully what you will find, a clear and helpful way.

Create A New Show

Creating a new show is very simple.

1. Start by going into an existing show. Type SHOW, NUMBER (number not currently used), RECORD
2. You can then name the show, SHOW, NUMBER, TEXT. Then type the title of the show, followed by ENTER

The new show file can now be used.

Rig The Axis

Before you can do anything you need to RIG the axes you need to the show. To do this follow the following code. Please note that once you have hit ENTER the screen will not change but the AXES will be riged to the show.

RIG, AXIS, 1, ENTER.

RIG, AXIS, 2, ENTER.

RIG, AXIS, 3, ENTER.

RIG, AXIS, 4, ENTER.

Create A View

Once you have created a show you need to add the axes to a view so you can see what you are controling.

• Firstly click on the camera icon on the right hand side of the screen.

• Now select ADD TABULAR GRID
• You now need to add the AXIS to the view.
• Select the AXIS you want to add to the view then click ADD AXES
• Please note, every time you want a new grid you need to reselect the axes
• At the bottom of the menu select what you would like to see in the grid.

Once you have the view set up you need to save it.

• Click on SAFE AS NEW
• Select the view from the list and click SELECT
• To re-name use the syntax VIEW number TEXT input your text

Name AXIS

You don't need to, but if you wish you can name your AXIS to make things easier to follow. To do this, use the following code;

AXIS name of axis TEXT what you want to call the axis

Set The Zero

1. Move winch to position you want to set as 0.
2. Type QUERY, AXIS, number of AXIS you want.
3. At the bottom of the query menu on the right side of the screen, select SET POSITION, 0, ENTER

The zero is now set.

Create Groups

eChameleon offers you the chance to group AXIS together in four different kinds of GROUPS. These are;

FREE GROUP - SAFE GROUP - LOCKED GROUP - SCULPTOR GROUP

Sometimes when running automation it is easier to group some of the AXIS together. For instance instead of typing;

AXIS 1 + AXIS 7 + AXES 14 + AXIS 36 ENTER

You would just type;

GROUP 1 ENTER

Thus providing the same sort of programming technique you would use on a lighting desk. Also groups come in handy if you have a couple of AXIS that need to maintain the same position relative to each other or against each other.

This section will provide you with information on the four different kinds of groups eChameleon offers.

Sculptor Group

2D Bridles

2D Bridles are where 2 lines are attached together to form a bridle. This enables an object (or person) to be flown almost anywhere within a 2D space. To create a 2D bridle, select the 2 Axes you want to group by typing AXIS, X, +, AXIS, X, GROUP, X, RECORD then simply select 'Sculptor Group' then '2D Bridal option when prompted.

More information on the setup and programming of 2D bridles in a project/show based situation can be found under Bridles 2013

3D Bridles

3D Bridals are where 3 or more lines are attached together to form a bridle. This allows any object or person to be flown almost anywhere within a 3D space. This is generally dependent on winch placement and the logistics of the theatre space.

Track and drop

Free Group

This type of group enables winches to be combined together for syntax purposes, but ensures that each winch is still individually controllable if necessary. An example of this would be when separate pieces of scenery are moved at the same time. A Free Group will ensure that any error on one axies will not cause the others to stop.

Safe Group

This group is very similar to a Free Group, but is generally used when axies are linked to a piece of scenery, but are not linked in position and move at different speeds. All axies will stop if there is an error.

Locked Group

A locked group ensures that all the axies within the group are linked together to maintain their relative position. This might be needed if there were a number of axies on 1 piece of set, and it could be potentially dangerous if any 1 axis were to move individually. If 1 axis encounters an error, all the others will stop, so their relative positions can be maintained.

Multi Target Cues

Multi target cues can be created when you want to build a number of steps into the same cue.

Triggers

Triggers can be used when you want to build a more complex cue using a number of different winches.

They are associated with a particular colour playback, to enable another playback to be started when a certain point has been reached.