New Athenaeum Theatre Sound

There is a world-class sound system in the Ath. This is made op of D&b Audiotechnik Amps and Speakers and a Midas Pro Series Console. The system is mostly hard-wired and does not move from its set position. There is the potential for up to 10 monitor mixes to stage and the orchestra pit on the house system.

Main House Rig

D&b E12

Main stalls speakers, one positioned in landscape either side of stage

S-200 Datasheet

Full Range
Frequency response (-3dB) 80-18000Hz
Power Handeling: 300W cont. / 600W peak
Sensitivity (1w/1m) 100dB
HF Transducer: 1” driver
LF Transducer: EVM 12S 12”
Dimensions HxWxD: 61x38x22 cm
Weight: 16,3kg
Impedance: 8Ω
Input connections 2x Neutrik XLR3

EV SH-1512

2 in stock

SH-1512 Datasheet

Tannoy T40r Subs

2 in stock

T40 Sub Data Sheet

Frequency Response.....36Hz-160Hz +/-3dB
Recommended Amplifier Power.....300 to 600W RMS (8 Ohm)
Power Handling.....300W (Average)...600W (Programme)...1200W (Peak - 10mS)
Nominal Impedance.....8 Ohms
Sensitivity.....96dB / 1W @ 1m
Distortion.....Not Specified
Dispersion.....Omnidirectional
Crossover Frequency.....Recommended 100Hz - 175Hz
Drive Unit.....381mm (15") Tannoy bass driver
Cabinet Volume.....100 litre vented
Cabinet Construction.....15mm birch plywood
Cabinet Finish.....Textured black / grey paint
Dimensions (HxWxD).....665mm (26.2") x 440mm (17.3") x 435mm (17.1")
Weight.....27 Kgs (59.4 lbs)

Tortoise Shell Speakers

2 in stock

Ultra Full Range: (2Hz-40kHz)
Dispersion: 360 degrees
Power Handeling: 50,000W cont. / 80,000W peak
Sensitivity (1w/1m) 100dB, very sensitive to lettuce
HF Transducer: 1” driver
LF Transducer: 18”
Dimensions HxWxD: 55x25x31 cm
Weight: 25kg
Impedance: 64Ω
Input connections 2x Neutrik XLR3
Ask Senga for further details...

Tannoy Leopard Subs

File:Tannoyleopard.jpg 2 in stock

Control

Soundcraft K3 Analogue Mixing Console

1 Permanently Patched into Ath Sound Rig

K3 User Guide