Merrily We Roll Along 2022

Merrily We Roll Along 2022
Summary
Dates 6th Dec 2022 - 9th Dec 2022
Performance Course Third Year MT
Location New Athenaeum Theatre
Creative Team
Director Lou Sheppard
Designer Ken Harrison
Sound Designer Allan Hamilton
Lighting Designer Anna Athanasiadi
Video Designer Rhia Mitsuhashi
Production Team
Stage Manager Reegan Graham
Deputy Stage Manager Caitlin Riddell
Assistant Stage Manager Iz Brett
Assistant Stage Manager Robyn Johnstone
Head of Stage + Automation Scotty
Head of Flys Toby Cass
Deputy Stage + Automation Rory Campbell
Stage Technician Jamie Burke
LX Programmer Pippa Reilly
PLX Jamie Murray
Production Sound Engineer Lewis Brown
Sound No. 2 Nathan Farndale
Sound No. 3/Deputy PSE Lana Kirk

Technical Stage Department

Design

At the White card stage, Merrily We Roll Along presented a huge challenge with multiple flying pieces and many moving set pieces. The biggest worry initially was that the Technical Stage Department was made up of the Head of Stage, a Deputy, and one Head of Flys. This posed a huge question as to how we could pull off the multiple scene changes. The set stayed very true to how it was at the white card. One major change was needed, however. To support the moving ‘Gallery’ Set piece which was 3m tall and 1.2m wide it posed the threat of being unstable, wobbly and tippy. The workshop manager decided that a ‘Truss Goalpost’ was needed on either side of the truck to support the steel-framed flat and stairs around the truck. This involved moving all of the Upstage set pieces 400mm further upstage.

Light Ladders

Two 1400mm x 6100mm Flats were built with Steel 'Ladder' like extensions and festoon. These were to feature in 3 different positions throughout the different scenes.

The lx cable was cable tied to bobbins to allow it to move freely with the set pieces.

One Light Ladder (Left) on Track Suspended on Truss

Light Ladder Controls - Two sets of tab track line with Fluro Tape Deads

Truss Truck (Gallery)

The truss truck was built our of two wooden bases on Tri - Castors, with 4 truss baseplates and 4 corners. It had 3 Positions during the show. ON, Half way off, and OFF. To keep it simple we labelled the positions of set 1, 2 and 3 based on the order in the show. 1 being its first appearance.

The Truss truck had two sets of track, one US and one DS. The Upstage track had two gauzes from stock tied together that would be pulled on stage and off stage by the cast as part of the scene changes. The DS Track Had a =Decorative Screen= made out of steel which was heavy, that had to be set by TSD during the interval.

Truss Truck

Truss Truck (Upstage) with Decorative Screen ON

Decorative Screen during interval change

Sound

One of the main challenges of this show was the pit being at half-height. This of course meant less control in the front of house mix, and an overall louder sound in the auditorium before amplification. This also meant carefully runnning our cables up onto the pit lift, including cue and comms cables as well as cat5 for personal monitoring. It was important that this was made safe for the muscicians by making cable runs as clean as possible.

This also meant rigging the MD Camera with a hex-clamp and camera rigging to the underside of the stage to ensure a good view of the MD.

Video

This show used two projectors, one in the FOH truss position and the other on stage on LX 1. This was due to the two different projection surfaces, one being the gauze and the other a flown balcony piece. Two projectors were used to adhere to the focal lengths.

Notes: Kramer HDMI to CAT5 extenders won't draw enough power when an optical HDMI is used on the other end of it.

Additionally, an old CRT monitor was to be used on stage, with a live camera feed going to it through the disguise server. However, due to the digital-to-analogue converter breaking, the monitor was sadly cut.

Here you can see the system diagram of the set-up. File:MWRA - Systems Diagram V002.pdf