Into The Woods 2021: Difference between revisions
| Line 14: | Line 14: | ||
=== Team === | === Team === | ||
Sound Designer (SD) - [[Stuart Henderson]] | Sound Designer/Snd no.1 (SD) - [[Stuart Henderson]] | ||
Production Sound Engineer (PSE) - [[Corey Jackson]] | Production Sound Engineer (PSE) - [[Corey Jackson]] | ||
| Line 21: | Line 21: | ||
Sound No.3 - [[Lewis Brown]] | Sound No.3 - [[Lewis Brown]] | ||
=== Design === | === Design === | ||
Revision as of 11:57, 24 May 2021
Technical Stage Department
Stage Management
Lighting
Sound
Team
Sound Designer/Snd no.1 (SD) - Stuart Henderson
Production Sound Engineer (PSE) - Corey Jackson
Sound No.2 - Stuart Green
Sound No.3 - Lewis Brown
Design
Plan
Equipment List
Band Layout
Due to the restrictions on distance due to the ongoing pandemic we had to prove that the band would all fit into the pit safely. To do this our PSE created a plan of the pit and then placed each performer in their individual bubble showing clear 2 meter spacing between all 7 members of the band.
Cable Runs
Full Venue cable run
Control room to FOH cable run
Sound World Postion
Due to limited capacity on stage Sound World for ITW 2021 could not be on stage. This meant that it was built in the control room. This actually turned out to be a largely convenient place for it. As we were using the Dante network it made it would be easy to patch throughout the venue as the patch points were located next to the Racks. it also meant the PSE and SND No.1 Could stay in contact throughout the show.