Kinesys

RCS Kit List

Hardware

4 x Liftket 500kg 24m/min 3ph with flightcases

4 x Elevation 1+ with Flightcase

1 x Array PD-ES-T Powerlock in Flightcase

1 x Rigger 8 Handset

1 x Vector Keypad (in laptop flightcase)

1 x Vector Laptop in Flight Case

---

Cables

1 x 4' Cable Flightcase

1 x E-Stop (2m Cable)

63A 5p Male CeeForm to Powerlock (2m cable)

63A 5p Female to Male 32A 5p CeeForm (0.5m cable)

125A 5p Male to Female 32A CeeForm (3m cable)

1 x 20m XLR7 Data Cable

1 x 30m XLR7 Data Cable

3 x 10m XLR7 Data Cable

3 x 10m 32A 3ph Power Cable

1 x 30m 32A 3ph Power Cable

30m Control Snake

Software

Groups

To operate more than one axis at a time we need to create a group for these. From the short cuts box double click the Pallets square to open a window on your screen

On this page where it says name we add in what we are wanting our group to be called. This could be down stage, up stage or upstage it is up to the operator as to what they name it. After naming it click the add button and your group will pop up below with a list of all your axis beside it.

Ticking the boxes beside the axis will add this into your group you have created.

Each axis can only be added into one group.

After you have added all of the axis into your group click the apply button to save this and then ok.