Chandler Sound: Difference between revisions

From paperclip
Jump to navigation Jump to search
Mfrew (talk | contribs)
Mfrew (talk | contribs)
Line 5: Line 5:
To be updated
To be updated


==Control==
==Console==
To Be updated
To Be updated



Revision as of 14:43, 30 August 2018

The sound reinforcement system in the Chandler is very versatile, there are NL2 speaker points on the facilities panels around the venue so speakers can be positioned where needed for specific shows.

Speakers

To be updated

Console

To Be updated

Amplification



Crown Micro Tech 2400
4 in stock, installed permanently in control room rack.
Crwon Micro Tech Operation Manual

System Control



Tannoy TX2 System Controller
'1 in stock, permanently installed in the control room amp rack
TX2 User's Manual

Playback/Recording



CD Playback
Denon DN-D4000
1 in stock, permanently installed in the playback/recording rack.
DN4000 Operating Instructions

Mini Disc Playback
Denon DN-M2300R
1 in stock, permanently installed in the playback/recording rack.
M2300R Operating Instructions

DAW Hardware
1 Focusrite Pro 40 in FOH rack
Saffire PRO 40 features a versatile 20 inputs and 20 outputs, including a complement of eight Focusrite mic preamps guaranteed to get the best out of any microphone, with minimal noise and distortion even at high gain. Two mic/line/instrument inputs are accessed via the front panel, which also provides two independent headphone monitor outputs.

This interface is best used with Safire Mix Control which can be downloaded here.

It is also important to note that due to the product interfacing via the Firewire 40 protocol, your playback machine must have either a firewire port or an adaptor.

It is also imperative that both the interface and the playback computer be fully switched off before connecting or disconnecting, as 'Hot-plugging' can cause irreversible damage to both the interface and the playback computer.