Merrily We Roll Along: Difference between revisions
No edit summary |
No edit summary |
||
| Line 34: | Line 34: | ||
= Prop makes = | |||
= Silver Balloons = | == Silver Balloons == | ||
The stage management team volunteered to make the silver foil balloons that were hung from the catwalks in the model box. To do this we had to order 'Silver Mylar material' from Amazon that cost approx £40. We cut the required size needed and heat sealed the parameter with a household iron, leaving a small 5mm gap to allow air to flow through when inflating them. (The smaller the gap, the less air will escape when inflating.) Once the balloons are inflated hold the gap closed and quickly heat seal with the iron to create a completely sealed balloon with no air gaps. If you wish to have any text on the balloons it is advised to paint his first before inflating. | The stage management team volunteered to make the silver foil balloons that were hung from the catwalks in the model box. To do this we had to order 'Silver Mylar material' from Amazon that cost approx £40. We cut the required size needed and heat sealed the parameter with a household iron, leaving a small 5mm gap to allow air to flow through when inflating them. (The smaller the gap, the less air will escape when inflating.) Once the balloons are inflated hold the gap closed and quickly heat seal with the iron to create a completely sealed balloon with no air gaps. If you wish to have any text on the balloons it is advised to paint his first before inflating. | ||
Revision as of 11:48, 4 December 2015
DSM - Astrid Rothmeier
Stage Manager - Amy Donaldson
Assistant Stage Manager - Fiona Dalgleish
Assistant Stage Manager - Chris Brown
Lighting Designer - Davy Cunningham
Lighting Operator - Laura Mason
Production Electrician - Paul Froy
Sound 1 - Hannah Allan
Sound 2 - Ryan Davy Babette Wickham-Riddick
Technical Stage Manager - Rory Boyd
Deputy Technical Stage Manager - Kieran Kenning
Prop makes
Silver Balloons
The stage management team volunteered to make the silver foil balloons that were hung from the catwalks in the model box. To do this we had to order 'Silver Mylar material' from Amazon that cost approx £40. We cut the required size needed and heat sealed the parameter with a household iron, leaving a small 5mm gap to allow air to flow through when inflating them. (The smaller the gap, the less air will escape when inflating.) Once the balloons are inflated hold the gap closed and quickly heat seal with the iron to create a completely sealed balloon with no air gaps. If you wish to have any text on the balloons it is advised to paint his first before inflating.