Our House

Show Dates

Preview 29th November 2014

2nd of December - 5th of December 2014

Creative Team

• Director - Joe Douglas

• Designer - Suzie Inglis

• Choreographer - Chris Wilson

• Musical Director - David Highman

• Assistant Musical Director - Tamara Saringer

• LX Designer - Davy Cunningham

• Sound Designer - Laura Dougan

Production Team

• Production Manager - Stephen Roe

• Stage Manager - Katy Nicolson

• Deputy Stage Manager - Siobhán Scott

• Technical Stage Manager - Ian Smyth

• Deputy Technical Stage Manager - Daniel Thompson

• Assistant Stage Managers - Bradley Jones, Rory Boyd

• Chief Production Electrician - Mary Crook

• LX Programmer - Robbie Butler

• Electricians - Ross Pringle, Neil Smith

• Sound 1 - Fraser Milroy

• Sound 2 - Sean Quinn

• Wardrobe Supervisor - Cate Mackie

• Wardrobe Deputy - Meg Davies

• Wardrobe Assistant - Barbara Grant

• Venue Technician - Gary Laing

Stage Management

To help us put the scaffolding back up in the Chandler I made a note of the markings on the scaffolding bars and the position of the steel deck legs.

File:Scaffolding Tower Markings.docx

Lots of drinks were used in the show. Below is a document outlining how the drinks were made.

File:Drinks Mixing ourhouse.pdf

Attached below is a risk assessment for a cast performing on a scaffolding platform structure in rehearsals.

File:OH Cast on Platform in Rehearsals RA.pdf

Attached below is the complete props list including sourcing information.

[[File:

Technical Stage Management

Kit List

Clamps

90° Scaff Clamp x31

Swivel Scaff Clamp x75

Split Swivel Scaff Clamps x15 (30 halves)

Split Doughty Clamps x1 (2 halves)

I-Beam Doughty Clamps x6

Wall Hinges x12

Feet

Square Feet x24

Round Feet x10

Split Round Feet x2

Masking

Chandler Soft Blacks (4m x 6m) x3

Hard Black Book Flat (6m) x2

Hard Black Book Flat (5.5m) x2

French Braces x4

Electrics

The "M"

A centre piece of the set was the large madness M. The designer had originally desired the M to be draped in Festoon, but it was decided that adding a layover piece to the structure would aid in both speed and aesthetic.

The M was wired with 3 separate parallel circuits, so as to allow the M to chase between it's three different colours. The parallel wiring also allowed redundancy in the event of a lamp failure.