TSM Project 2008 - Deck Platform: Difference between revisions
| Line 13: | Line 13: | ||
== Required Hardware == | == Required Hardware == | ||
3 x Lite Deck | |||
8 x Round Slings | 8 x Round Slings | ||
| Line 21: | Line 21: | ||
4 x 10m Single Leg Wire Rope Bridles (7mm/ Thimbles on both ends) | 4 x 10m Single Leg Wire Rope Bridles (7mm/ Thimbles on both ends) | ||
24 x M10 Bolts | |||
24 x M10 Nuts | |||
Revision as of 16:03, 11 March 2008
Concept
The concept for my project is simple, I would like to have an Up Stage platform which raises and lowers throughout the perfomance.
Ideas
For my project, I looked at using electric winches in order to raise and lower a platform (Made from 3 Lite Deck). I understand that when briefed on the project we were told we had an unlimited budget, however after costing for these winches I decided to use the counterweight flying system, as I believe that this more like the reality of beaing a Technical Stage Manager.
In order to increase my safety factor, I obtained the hardware for the project as if I were making the platform from Steel Deck. In reality I would use Lite Deck.
Required Hardware
3 x Lite Deck
8 x Round Slings
8 x 1T D Shackles
4 x 10m Single Leg Wire Rope Bridles (7mm/ Thimbles on both ends)
24 x M10 Bolts
24 x M10 Nuts