TSM08 Project - Rising Revolve

Main Idea

For my project I have decided to research a rising revolve - something like the Pride rock in the "Lion King" Lion King video. But I'm going to scale it down a lot. My idea is to have a build up stage with steel desk and have the revolve in the middle, which would mean I would need to build some arc rostra around the revolve.

Revolve Costings

Here are just a few sites I found which hire out different size revolves, and hiring prices...

The Revolve Staging Company This is probably the best one I've found:

REVOLVING PLINTHS

• Slightly larger,
• ideal for revolving up to 2 persons,
• range from 700mm-1000mm in diameter,
• overall height 170mm - 600mm,
• supplied in finish of your choice,

Finishes include:

• Loop nylon covered ( large colour choice)
• Stretch lycra covered ( 7 colour choice)
• Painted flat colours
• Painted custom artwork
• Green/blue screen finish (chroma key green, optic blue etc.)

Revolving Plinths are 240v, have variable speeds between 0.1 rpm - 3rpm and direction control.

OR

THE SPIN BOX

• 1m diameter revolving stage, within a 1220mm x 1220mm (4` x 4`) deck.
• Ideal for locating 1 or several within a larger stage
• For use with stage heights from 200mm to 1m
• Weight loadings from 175Kg to 3000Kg
• Remote speed/direction control
• Finishes and coverings available on request

COSTING

Revolve Size	Max Load	Height	Daily hire rate (£)	Weekly Hire Rate (£)
300mm -600mm	85kg	140mm	35	125
700mm -1000mm	175kg	170mm	45	150

British Turntable Mainly use for exhibitions.

Model	Typical diameter	Height	Slip rings	Normal capacity	Normal speed (variable)	Deck (fire-retardant)
RS20	2m	300mm	10 amp	600kg	0.3-1.2rpm	20mm ply
RS25	2.5 – 3m	300mm	10 amp	1500kg	0.2-2.2rpm	20mm ply
RS30	3 - 3.5 - 4m	300mm	10 amp	1500kg	0.2-1.8rpm	20mm ply

Bumat

type	DSK 10/05	DSK 15/05	DSK 20/05
diameter	1000 mm	1500 mm	2000 mm
bearing capacity	500 kg	500 kg	500 kg
overall height incl. wood	205 mm	235 mm	235 mm
rotating speed	2 rpm	2 rpm	2 rpm
power supply	380 V / 50 Hz	380 V / 50 Hz	380 V / 50 Hz
standard colour	RAL 5002 (ultramarin-blue)	RAL 5002 (ultramarin-blue)	RAL 5002 (ultramarin-blue)
motive power	180 W	180 W	180 W
sense of rotation	left / right	left / right	left / right
weight	65 kg	95 kg	130 kg
cable-length	5 m	5 m	5 m

• Steel The Scene
• Grove and Rawdon

Rostra Costings

Since this is an Academy project I can safely say we have steel deck in stock and scaff leg to cut to the acquired height. All that will need to be costed for is 2 arcs to go around the revolve. Construction department's suppliers have 70mmx21mm Red Pine at 54p a meter and 18mm ply at £23 per meter. So roughly about £60 for the 2 arc Rotras.

Other Ideas

Of course I could do the opposite and get a stage to lower with a Revolve in the middle and create the illusion on someone rising where as everyone else around is being lowered.

Final Choice

Well I'm going to settle with The Revolve Staging Company as they seem to have the best choice of revolves.

Problems

I couldn't find anything on the Internet for rising revolves so came to the conclusion it was something which would have to specifically be made for a show - and the best place I would advise going to would be Stage Technologies