New Athenaeum: Difference between revisions

Revision as of 11:03, 15 November 2013

All lanterns are supplied in working order with hook clamps, wing nuts and safety chains/ bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults and damages to the Venues Team. All lanterns with the note below have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.

Moving Heads

VL1000tsd
The VL1000tsd (tungsten/shutter/dimmer) is a powerful 1000w profile with motorized zoom, full colour pallette, versatile rotatable shutters and gobos, internal electronic and mechanical dimming. Weighs 32kg. (this unit requires a 2 person lift for safety)

3 in stock. Contact Venues Team to ensure availability. Normally allocated to the New Athenaeum but can be available elsewhere if not required. Not advisable for use in the Chandler due to size and operational noise.
1 VL out for major service

Profiles

Source Four 14 Degree

4 in stock

Source Four 19 Degree

20 in stock

Source Four 26 Degree

20 in stock

Source Four 36 Degree

20 in stock

Source Four 50 Degree

10 in stock

Source Four 70 Degree

6 in stock

Source Four 15 - 30 Degree ZOOM

10 in stock

Source Four 25 - 50 Degree ZOOM

10 in stock

Source Four LED Daylight with 25 - 50 lens tube

6 in stock

Source Four 15 - 30 degree lens tube for LED engine back

please contact venues team if you would like to change the lens tubes.
4 in stock

To go along with the source 4 profiles we also have 50 gobo holders that take a size B gobo.

We also have 20 iris for the source fours.

Strand Prelude 16/30
These are for use as conductor spots only and are not to be moved
2 in stock

Fresnels + PCs

1200w Selecon Fresnel.
Weighs 5kg
50 colour frames and 49 barndoors
All Fresnels have a bonded colour frame and barndoor
50 in stock

1200w Selecon PC
Weighs 6.1kg
All PC's have a bonded colour frame and barndoor
10 in stock

2000w CCT starlette Fresnel
Weighs 11.3kg

Only 11 barndoors are available for these units
12 in stock

ADB CH50 5000w Fresnel.
Weighs 11.9kg
1 in stock

Beamlights

Par64 Parcans
(various beamsize) 30 in stock
Weighs 1.92kg
All Parcans have a bonded colour frame
See the Lantern Prep section for how to tell the difference between PAR lamps.
PLEASE NOTE - We have a variety of PAR 64 lamps - we may not have all of the same lamps that you require for your show.

Par 64 Short nose Parcan
(various beamsize) 2 in stock
Weighs 1.71kg

Source 4 PAR
(Various beamsize, interchangable lenses) 50 in stock
There are 13 Barn Doors available for these lanterns
Weighs 3.4kg
All S4 Pars have a bonded colour frame
This is a good guide about how to change Source 4 Par Lenses, and how to tell the different types. Limited barndoors availiable for these units

Source 4 PARNEL
6 in stock
Weighs 3.6kg
All S4 Parnels have a bonded colour frame

Floods

1000w Selecon LUI assymetric flood12 in stock
1000w Strand Coda. Weighs 4.3kg20 - flood bar units only
THESE CODA'S ARE LOCATED ON THE FLOOD BAR AND MUST NOT BE REMOVED WITHOUT PERMISSION

1000w CCT Starlette 4 way compartment floods. Weighs 24.5kg4 in stock
1000w Orion 4 Way Groundrow (floor only) Weighs 14.5kg8 in stock
Note - These use special "feeder cables" to 32a

Follow Spots

2 Robert Juliet Korrigan 1200W HMI with Ballast, complete with 6 frame colour changer

Beam angles

Below is a quick guide to callculating the throw of lanterns.

Hazers and Smoke Machines

Le Maitre MVS Hazer
The Multi Venue System (M.V.S) has a variable high output haze with whispers to 80cc/hr, twin variable high output haze projection fans and 90 degree electronically variable haze output direction. It features four channel DMX512, combined control functions and DMX receiver. The MVS has a higher power air pump and advanced fan motor control for wide range operation. It’s larger diameter hazing tube doubles the effective area and increases its working life span, and makes cleaning easier. The MVS is arc bonded, shielded and has a heavy duty thermo-couple sensor. It also has data storage capability.
FEATURE LIST Variable high output haze: whisper to 80cc/hr (double existing Neutron). Twin variable high output haze projection fans. 90 degree electronically variable haze output direction. 4 Channel DMX 512. 3 digit led display multifunction control panel. Combined control functions and DMX receiver. Data storage capability. Simplified high current control using computer inrush control. Higher power air pump. Electronic Haze output angle control. Advanced fan motor control for wide range operation. Higher output controllable haze. Larger diameter hazing tube 3.3mm (2.4mm) doubles effective area for increase in working life span, and easier cleaning. Arc bonded, shielded and heavier duty thermo-couple sensor. External Bottle design allows for multiple position use. Clip-on bottle carrier for easy transport (Bottle carrier is OPTIONAL). No oil residue. Continuously variable fan output up to 125 cubic metres per hour.
1 in stock

Jem ZR44 Smoke Machine
The Jem ZR44 Hi-Mass™ is a reliable and highly efficient fogger capable of precise fog delivery from subtle to massive. Ideal for a variety of settings from small venues to huge stadiums and arenas, it features advanced technology for top-quality performance, as well as advances in digital functionality such as RDM compatibility.
1200 m³/min fog output
Continuous output
1800 W heat exchanger
7.5 min heat-up time
Floor standing or truss mounting
Neutrik PowerCon connector
Indirect Fluid Sensing System
Proprietary Pro Steam Simulation fluid solution
Different fluid options for different applications
Leaves no oil residue on light fixtures
Tough and solid design
3 & 5 pin DMX interface
Prepared for multifunctional digital remote
RDM capableSoft Start technology
2 in stock

Control

Control in this venue is normally the GrandMA (Fullsize). More details here

DMX goes directly to the chilli dimmers from the Ath control room. There is also a line to the gods (labelled "To Patchbays") which then goes to the promptside flys. There are 1u splitter units at each of these locations.

Houselights are on channels 221 through 224. If the desk is powered up + plugged in it will override the chilli system. Be aware of this!

Cabling

Socapex

Mulitcore Lengths

2x 5m

5x 10m

7x 15m

1x 19m

6x 20m

1x 30m

1x 36m

Total Socapex Length: 370m

N.B. There is also one 15m hard-wired Multicore that is not Socapex

Tails+Spiders

Spiders/Break-ins

17x 800mm (Short)

1 x 1800mm (Long)

Tails/Break-outs

8x 800mm (Short)

1x 1500mm (Mid)

2x 1800mm (Long)

N.B. As mentioned there is one Multicore where the spiders and tails are hard-wired into the cable

Internally Wired Bars (IWBs)

All IWBs are wired to 15A connections and cannot be changed.

4x Short Black - 6 Circuits each

3x Long Silver - 6 Circuits each

1x Long Silver - 12 Circuits

1x Long Silver - 10 Circuits (Two circuits non-operational)

TOTAL IWB Circuits:64

CEE Form

Single Phase 1Φ

16A

2x 2m

1x 3m

1x 5m

4x 7m

2x 10m

1x 13m

2x 15m

1x 17m

Total Length: 120m

32A

4x 20m

N.B. If the ground rows are in use with the Back Projection Screen then these are used to extend the ground row multicore)

63A

1x 6m

Jumps

15A - 32A

1x 2m