PLX 08 Mirror Ball: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== Group Members == | == Group Members == | ||
Marthe | [[Marthe Hoffman]], [[Ricky Smith]], [[Ashley Thomas]] and [[Calum Wyllie]]. | ||
| Line 7: | Line 7: | ||
We intend to construct a | We intend to construct a electronic chasing sequence circuit, consisting of LEDs within a mirrorball. | ||
| Line 13: | Line 13: | ||
With the help of Ricky managing to get a mirrorball we could chop up, we split the mirrorball into three sections using the pyrograph. This way easily done as it was hollow. On each of the three sections we cut | With the help of Ricky managing to get a mirrorball we could chop up, we split the mirrorball into three sections using the pyrograph pyrograph. This way easily done as it was hollow. On each of the three sections we cut seven little grooves so the LEDs could sit flush in place. They were held in place using LX tape, allowing us to solder the bell wire onto the ends of the LEDs. This process was repeated for each of the other sections. We thought it would be a nice idea to incorporate a sequencer within the mirrorball so that the LEDs would flash on and off. | ||
It is made of three series circuits, with seven parallel circuits within each series. Please refer to the diagram below for more information. | |||
== Diagram of Circuit == | == Diagram of Circuit == | ||
[[Image: | <gallery> | ||
[[Image:to_be_created.jpg]] | |||
</gallery> | |||
Revision as of 17:22, 3 March 2008
Group Members
Marthe Hoffman, Ricky Smith, Ashley Thomas and Calum Wyllie.
Outline
We intend to construct a electronic chasing sequence circuit, consisting of LEDs within a mirrorball.
Construction
With the help of Ricky managing to get a mirrorball we could chop up, we split the mirrorball into three sections using the pyrograph pyrograph. This way easily done as it was hollow. On each of the three sections we cut seven little grooves so the LEDs could sit flush in place. They were held in place using LX tape, allowing us to solder the bell wire onto the ends of the LEDs. This process was repeated for each of the other sections. We thought it would be a nice idea to incorporate a sequencer within the mirrorball so that the LEDs would flash on and off.
It is made of three series circuits, with seven parallel circuits within each series. Please refer to the diagram below for more information.