Miscellaneous LX sundries: Difference between revisions

From paperclip
Jump to navigation Jump to search
← Older edit
VisualWikitext
Jtowers (talk | contribs)
157 edits
No edit summary
Devans2 (talk | contribs)
309 edits
 
(81 intermediate revisions by 5 users not shown)
Line 1: Line 1:
== Ladders ==
[[File:manufactured-assemblies-ladder-lighting.jpg|200px]]
6 x Wire Rope Lighting Ladders
Total Hanging Length - 3m<br>
Rung Width - 1m (1000mm)<br>
Height Increments - 300mm<br>
Top Steel Ends - Screwgate Hook/Karabiner<br>
Bottom Steel Ends - Thimble Splice<br>
SWL - 500kg<br>
Standard setup is 4 rungs per ladder - we have 24 rungs total
<gallery>
<br>
File:LX Ladder 3.jpeg
File:LX Ladder 1.jpeg
File:LX Ladder 4.jpeg
<br>
</gallery>
<br>
https://www.ropeassemblies.co.uk/products/manufactured-assemblies/lighting-ladders/
<br>
<br>
== Half Coupler ==
<gallery>
File:Lightweight_Half_Coupler_1.JPG
File:Lightweight_Half_Coupler_2.JPG
</gallery>
'''21 in stock - update 17/08/20''' <br>
'''19 x Black and 2 x Silver -- SWL 100kg -- Uses M10 Bolt set'''<br>
<br>
<br>
<br>
== Unitrack FoH fittings ==
<br>
<br>
'''40 in stock - NB Uses M12 Bolt to mount lantern to TrackTamer''' <br>
<gallery>
File:TrackTamer.JPG
</gallery>
<br>
<br>
<br>
<br>
'''UniTrack Safety attachment for lanterns 30 in stock'''
<gallery>
File:Unitrack_Safety1.JPG
File:Unitrack_Safety2.JPG
</gallery>
<br>
<br>
<br>
== Boom Arms ==
== Boom Arms ==
[[Image:Boom_arm.JPG]]'''26 in stock''' <br>
<br>
Located USL in the Ath.
'''48mm tube boom arms'''<br>
[[File: Boom_arm_48mm_Scaff_.JPG |200px]]
<br>
 
We  have a stock of 48mm aluminium pipe in the following lengths that can be used with a fixed 90degree scaff clamp to make a boom arm - '''THIS METHOD MUST NOT BE USED ON UPRIGHT TRUSS'''
<br> 300mm x 7
<br> 400mm x 20
<br> 500mm x 16
<br> LUSTR x 10 (allow a Lustr to be outrigged from a boom with the fixture parallel to the arm without the DMX & Powercon fouling on the boom)
<br> 800mm x 6
<br> 1000mm x 2
<br>
[[File: Boom Arm Mix.JPG |300px]]
<br> These are stored in the grey tubs in the Ath LX store
<br>
[[File: Boom_Arm_Storage.jpg |300px]]
 
 
'''LX Dept Fixed 90deg Clamps For Boom Arms'''
<br> These are marked with a spot of pink spray paint and live in a wheeled wooden box in the Ath LX store
<br> [[File: Scaff_Clamps_LX_Dept.JPG|200px]]
 
 
<BR>
 
'''Doughty Twist Boom Arms:'''
 
 
<br>
[[File: Boom_Arm_w_Safety_Point.JPG |200px]]
 
 
'''Boom Arm with safety bond attachment point - Stock x 11'''
- USE THESE FIRST when rigging booms, or use these for units above head height
 
<br>
 
 
[[File: Standard_Boom_Arm.JPG |200px]]


== Pyro ==


See [[Pyro]]
'''Standard Boom Arm - Stock x 30'''
-  Use for low units
<br>
<br>


== Special Effects ==
----


== Mirrorballs ==
== Mirrorballs ==
1 x Large Mirror ball is currently available with a rotating mirror ball motor<br>
2 x Small 40cm diameter mirror ball - no rotator
[[File:40cm_Diameter_mirror_ball_-_small.jpg]]
<br>
<br>
<br>
<br>
<br>
<br>
<br>
== LED Tape Decoders ==
<br>
<br>
<br>
'''City Theatrical Qolorflex 24 x 3a  - 12volt to 24volt input,''' 24 channels by 3 amps per channel. Housed in 8u rackmount flight case with 12v or 24v powersupplies built in. Unit has 6 x 5pin XLR outputs for 6 ways of RGBW colour control
<br>
www.https://www.citytheatrical.com/products/qolorflex-24x3a-dimmer
Qnty - 1
<br>
<gallery>
File:City Theatrical Qorloflex 24 x 3a.jpeg
</gallery>
<br>
<br>
Cable extension stock:<br>
5 x 5m 5pin RGBW<br>
6 x 10m 5pin RGBW<br>
1 x 15m 5pin RGBW<br>
6 x 5pin Plug to Pheonix connector for connection to bare ends on tape<br>
<br>
<br>
<br>
<br>
'''B078XS2SKH decoder  - 12volt to 24volt input, 4 channels by 5 amps per channel'''
Qnty - 8
<gallery>
File:B078XS2SKH decoder 1.jpeg
File:B078XS2SKH decoder 2.jpeg
File:IMG 0209a.jpg
</gallery>
<br>
<br>
<br>
<br>
'''LT-8030 Decoder - 5v to 24v, 3 channels by 4 amps per channel'''
Qnty - 1
<br>
<gallery>
File:LT-8030_Decoder_1.jpeg
File:LT-8030_Decoder_2.jpeg
</gallery>
<br>
'''Decoder - 9v to 24v - 3 channels by 4 Amps per channel'''
Qnty 1
<br>
[[File:DMX512_Decoder_9v_-_24v.jpeg|300px|thumb|left]]
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
'''PX24500D Decoder - 12v to 24v - 4 Channel by 5amps per channel'''
Qnty 3
<br>
[[File:PX24500D_Decoder_1.jpeg|300px|thumb|left]]
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
== LED Power Supplies ==
Meanwell 12v LPV-100-12 100watt 12volt power supply unit
Qnty - 9
[[File: PSU LPV-100-12 1.JPG|200px]]
<br>
<br>
<br>
<br>
Triac Dimmable Constant Voltage LED Driver
30watts at 24volts
Qnty 2
This is a PSU that you can dim via a normal dimmer to dim 24v LED products without needing a DMX decoder
[[File:Triac_Dim_24v_-_HL-Dim-CV-30W-24v_1.jpeg|200px]]
<br>
<br>
<br>
<br>
Tagra Orion-D-48/24v Triac Dimmable Constant Voltage LED Driver
48 watts at 24volts
This is a PSU that you can dim via a normal dimmer to dim 24v LED products without needing a DMX decoder
[[File:Tagra_Orion_D-48-24V_1.jpeg|200px]]
<br>
<br>
<br>
<br>
== LED Tape ==
12v RGB+ WW & CW (also called RGB + CCT) - '''NOT CUTTABLE''' -  lengths currently available:
<br>
6 x 0.5m<br>
6 x 0.75m<br>
6 x 1m<br>
6 x 2m<br>
<br>
12v RGB+WW double row tape - encased in silicone - in 1m lenghts - NOT cuttable
qnty - 6 x 1m length
[[File: RGB+WW double row 1.JPG|400px]]
<br>
<br>
<br>
<br>
12v RGBWW IP65 tape - silicone encased - RGB plus a WW separate chip - 5m lenghts - NOT cuttable
qnty 5 x 5m reel
[[File:RGBWW_IP65_5m.jpeg|400px]]
<br>
<br>
<br>
<br>
12v RGB IP65 tape - silicone encased - in 5m lengths on reels - NOT cuttable
qnty 3 x 5m reel
[[File:12v_RGB_IP65_5m.jpeg|400px]]
<br>
<br>
<br>
<br>
12v RGB IP65 tape - silicone encased - RGB in 2m lengths - cuttable
Qnty 12 x 2m section
[[File:RGB_IP65_2m.jpeg|400px]]
<br>
<br>
<br>
<br>
12v RGB IP65 cuttable tape - currently in 2m sections
Qnty 3 x 2m section
[[File:12v_RGB_IP65_2m.jpeg|400px]]
<br>
<br>
<br>
<br>
24v RGBWW - IP56 splash proof - cuttable to specific lengths - current stock 4m white plastic reel
Qnty 1 x 4m reel
[[File:24v_RGBWW_.JPG|400px]]
<br>
<br>
<br>
<br>
24v RGBWW - IP56 splash proof - NOT cuttable on BLACK plastic reel
Qnty 1 x 3m reel
[[File:24v_RGBWW_2.jpeg|400px]]
<br>
<br>
<br>
<br>
== Mini strobe ==
1 Strobe QK75S
[[File: Mini strobe.jpg|200px]]
== Fairy Lights ==
11 x 7.5m white string (3 pin interlinking cable) - REQUIRES PURCHASE OF 24V PSU from "Lights for Fun"
[[File:Single_strand_small.jpg]]
4 x 9m long white string with 14 drop strands 2.5m length - c/w 13a plug adapter
[[File:Multi_strand.jpg|200px]]
==Festoon==
15m Length - 50cm lamp spacing x 4
10m Length - 50cm lamp spacing x 1
10m Length - 75cm lamp spacing x 2
8m Length - 75cm lamp spacing x 1
== Neon Flex - 50cm batten ==
[[File:50cm_Neon_flex_-_small.jpg|200px]]
5 x 0.5m length of white Neon flex mounted on timber as short batten type light source - Requires 24Volt driver
==Blue Hanging Fluorescent ==
[[File:1m_Blue_Fluorescent_tube_lights_-_small.jpg|200px]]
4 x 1m Hanging Fluorescent light fitting - essentially blue gelled fluorescent fitting - c/w hanging loop for verticle hanging, inline switch, and 13a plug
==LED Tape Fluorescent Fittings ==
[[File:LED Fluoro 1.jpg|200px]]<br>
[[File:LED Fluoro 2.jpg|200px]]<br>


== VLs ==
[[File:LED Fluoro 3.jpg|200px]]<br>


4x VL1000 Tungstens <br>
4 x 1150mm LED tape based Fluoro fitting. Has RGB + Cold White tape that is frosted/diffused to try and mimic a fluorescent tube. Tape is 12v @ 12.2w p/M so approx 15w per tube. <br>
[[Image:VL1k.jpg |200px]] <br>
<br>
Weighs 32kg, requires around 450watts max <br>
<br>
2 are equipped with gobo wheels. All 4 units are normally located in the ath, check with venues before using. <br>


== CTP Lighting Kits ==
[[File:LED Twin Fluoro 1.jpg|200px]] [[File:LED Twin Fluoro 2.jpg|200px]]<br>
<br>
<br>


== Portable DMX Splitters/Demuxes/Muxes ==
4 x 1550mm LED tape based Twin Fluoro fitting. Has RGB + Cold White tape that is mounted to an egg crate diffuser to mimic a fluorescent tube. Tape is 12v @ 12.2w p/M so approx 20w per fitting. <br>

Latest revision as of 15:29, 18 April 2023

Ladders


6 x Wire Rope Lighting Ladders

Total Hanging Length - 3m
Rung Width - 1m (1000mm)
Height Increments - 300mm
Top Steel Ends - Screwgate Hook/Karabiner
Bottom Steel Ends - Thimble Splice
SWL - 500kg
Standard setup is 4 rungs per ladder - we have 24 rungs total



https://www.ropeassemblies.co.uk/products/manufactured-assemblies/lighting-ladders/



Half Coupler

21 in stock - update 17/08/20
19 x Black and 2 x Silver -- SWL 100kg -- Uses M10 Bolt set



Unitrack FoH fittings



40 in stock - NB Uses M12 Bolt to mount lantern to TrackTamer





UniTrack Safety attachment for lanterns 30 in stock





Boom Arms


48mm tube boom arms

We have a stock of 48mm aluminium pipe in the following lengths that can be used with a fixed 90degree scaff clamp to make a boom arm - THIS METHOD MUST NOT BE USED ON UPRIGHT TRUSS
300mm x 7
400mm x 20
500mm x 16
LUSTR x 10 (allow a Lustr to be outrigged from a boom with the fixture parallel to the arm without the DMX & Powercon fouling on the boom)
800mm x 6
1000mm x 2

These are stored in the grey tubs in the Ath LX store


LX Dept Fixed 90deg Clamps For Boom Arms
These are marked with a spot of pink spray paint and live in a wheeled wooden box in the Ath LX store



Doughty Twist Boom Arms:




Boom Arm with safety bond attachment point - Stock x 11 - USE THESE FIRST when rigging booms, or use these for units above head height




Standard Boom Arm - Stock x 30 - Use for low units

Mirrorballs

1 x Large Mirror ball is currently available with a rotating mirror ball motor

2 x Small 40cm diameter mirror ball - no rotator








LED Tape Decoders




City Theatrical Qolorflex 24 x 3a - 12volt to 24volt input, 24 channels by 3 amps per channel. Housed in 8u rackmount flight case with 12v or 24v powersupplies built in. Unit has 6 x 5pin XLR outputs for 6 ways of RGBW colour control
www.https://www.citytheatrical.com/products/qolorflex-24x3a-dimmer

Qnty - 1



Cable extension stock:
5 x 5m 5pin RGBW
6 x 10m 5pin RGBW
1 x 15m 5pin RGBW
6 x 5pin Plug to Pheonix connector for connection to bare ends on tape




B078XS2SKH decoder - 12volt to 24volt input, 4 channels by 5 amps per channel

Qnty - 8







LT-8030 Decoder - 5v to 24v, 3 channels by 4 amps per channel

Qnty - 1



Decoder - 9v to 24v - 3 channels by 4 Amps per channel

Qnty 1

















PX24500D Decoder - 12v to 24v - 4 Channel by 5amps per channel

Qnty 3















LED Power Supplies

Meanwell 12v LPV-100-12 100watt 12volt power supply unit

Qnty - 9







Triac Dimmable Constant Voltage LED Driver

30watts at 24volts

Qnty 2

This is a PSU that you can dim via a normal dimmer to dim 24v LED products without needing a DMX decoder






Tagra Orion-D-48/24v Triac Dimmable Constant Voltage LED Driver 48 watts at 24volts

This is a PSU that you can dim via a normal dimmer to dim 24v LED products without needing a DMX decoder





LED Tape

12v RGB+ WW & CW (also called RGB + CCT) - NOT CUTTABLE - lengths currently available:
6 x 0.5m
6 x 0.75m
6 x 1m
6 x 2m


12v RGB+WW double row tape - encased in silicone - in 1m lenghts - NOT cuttable

qnty - 6 x 1m length






12v RGBWW IP65 tape - silicone encased - RGB plus a WW separate chip - 5m lenghts - NOT cuttable

qnty 5 x 5m reel






12v RGB IP65 tape - silicone encased - in 5m lengths on reels - NOT cuttable

qnty 3 x 5m reel







12v RGB IP65 tape - silicone encased - RGB in 2m lengths - cuttable

Qnty 12 x 2m section






12v RGB IP65 cuttable tape - currently in 2m sections

Qnty 3 x 2m section







24v RGBWW - IP56 splash proof - cuttable to specific lengths - current stock 4m white plastic reel

Qnty 1 x 4m reel







24v RGBWW - IP56 splash proof - NOT cuttable on BLACK plastic reel

Qnty 1 x 3m reel






Mini strobe

1 Strobe QK75S

Fairy Lights

11 x 7.5m white string (3 pin interlinking cable) - REQUIRES PURCHASE OF 24V PSU from "Lights for Fun"


4 x 9m long white string with 14 drop strands 2.5m length - c/w 13a plug adapter

Festoon

15m Length - 50cm lamp spacing x 4

10m Length - 50cm lamp spacing x 1

10m Length - 75cm lamp spacing x 2

8m Length - 75cm lamp spacing x 1

Neon Flex - 50cm batten

5 x 0.5m length of white Neon flex mounted on timber as short batten type light source - Requires 24Volt driver

Blue Hanging Fluorescent

4 x 1m Hanging Fluorescent light fitting - essentially blue gelled fluorescent fitting - c/w hanging loop for verticle hanging, inline switch, and 13a plug


LED Tape Fluorescent Fittings






4 x 1150mm LED tape based Fluoro fitting. Has RGB + Cold White tape that is frosted/diffused to try and mimic a fluorescent tube. Tape is 12v @ 12.2w p/M so approx 15w per tube.





4 x 1550mm LED tape based Twin Fluoro fitting. Has RGB + Cold White tape that is mounted to an egg crate diffuser to mimic a fluorescent tube. Tape is 12v @ 12.2w p/M so approx 20w per fitting.

Retrieved from "https://paperclip.rcs.ac.uk/index.php?title=Miscellaneous_LX_sundries&oldid=29496"