New Athenaeum Theatre Sound: Difference between revisions

From paperclip
Jump to navigation Jump to search
← Older edit
VisualWikitext
No edit summary
Krobertson (talk | contribs)
551 edits
 
(104 intermediate revisions by 5 users not shown)
Line 1: Line 1:
== Headline text ==
There is a world-class sound system in the Ath.  This is made op of D&b Audiotechnik Amps and Speakers and a Midas Pro Series Console.  The system is mostly hard-wired and does not move from its set position.  There is the potential for up to 10 monitor mixes to stage and the orchestra pit on the house system.


== Speakers ==
== Main House Rig ==


'''D&b E12'''


[[Image:e12.jpg]] '''2 Main stalls speakers, one positioned in landscape aspect either side of stage'''
<br>
<br>
Powered by 1 D&b D6 Amplifier. 
<br>
Sends 1 & 2 on XLR Patchbay.
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/E12_E12-D_Manual_1.2EN.PDF E12 Manual]
<br>
[http://www.dbaudio.com/fileadmin/docbase/The_E-Series.PDF The E-Series]
<br>
<br>
[[Image:e12_data.jpg]]
<br>
<br>
'''D&b E8'''
[[Image:e8.jpg]] '''4 Upper floors speakers, one positioned at either side of Proscenium in portrait aspect'''
<br>
<br>
Powered by 2 D&b D6 Amplifiers. 
<br>
Sends 3 & 4 on XLR Patchbay.
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/E8_Manual_1.3EN.PDF E8 Manual]
<br>
[http://www.dbaudio.com/fileadmin/docbase/The_E-Series.PDF The E-Series]
<br>
<br>
[[Image:e8_data.jpg]]
<br>
<br>
'''D&b Qi7'''
[[Image:qi7.jpg]] '''2 Lower section Centre-fill Mid-Tops placed in landscape aspect in Centre Cluster'''
<br>
<br>
Powered by 1 D&b D6 Amplifier. 
<br>
Send 5 on XLR Patchbay.
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/Qi7_Manual_1.2EN.PDF Qi7 Manual]
<br>
[http://www.dbaudio.com/fileadmin/docbase/The_Q-Series.PDF The Q-Series]
<br>
<br>
[[Image:qi7_data.jpg]]
<br>
<br>
'''D&b Qi-SUB/QiCSA-SUB'''
[[Image:qsub.jpg]] '''3 Upper section Centre-fill Subs in Cardioid Arrangement in Centre Cluster'''
<br>
<br>
Powered by 1 D&b D12 Amplifier. 
<br>
Send 6 on XLR Patchbay.
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/Qi_QiCSA-SUB_Manual_1.2EN.PDF Qi-SUB/QiCSA-SUB Manual]
<br>
[http://www.dbaudio.com/fileadmin/docbase/The_Q-Series.PDF The Q-Series]
<br>
[http://www.dbaudio.com/fileadmin/docbase/TI330_1.2E.PDF TI 330 - Cardioid Sub Woofer Arrangement]
<br>
<br>
[[Image:qsub_data.jpg]]
<br>
<br>
'''D&b E0'''
[[Image:e0.jpg]] '''4 Black Front Fills and 12 White Delay speakers spread over all floors on two seperate rings'''
<br>
<br>
Powered by 3 D&b D6 Amplifiers. 
<br>
Sends 7, 8 & 9 on XLR Patchbay.
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/E0_Manual_3.2EN.PDF E0 Manual]
<br>
[http://www.dbaudio.com/fileadmin/docbase/The_E-Series.PDF The E-Series]
<br>
<br>
[[Image:e0_data.jpg]]
<br>
<br>


There is a flown centre cluster in the Ath and also a stock of speakers in the Void. Void stock is as follows:
==Foldback==
 
'''D&b E3'''
 
[[Image:e3.jpg]] '''6 In stock - 2 with horizontal flying brackets, 4 with vertical flying brackets'''
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/E3_Manual_3.1EN.PDF E3 Manual]
<br>
[http://www.dbaudio.com/fileadmin/docbase/The_E-Series.PDF The E-Series]
<br>
<br>
[[Image:e3data.jpg]]
<br>
<br>


==Additional Speakers==


'''EV S-200'''
'''JBL Control 226C/T'''


[[Image:s200.jpg]] '''5 in Stock'''
[[File:JBL Control.jpg]]'''18 permanently installed in the auditorium'''
<br>
<br>
[http://www.jblpro.com/BackOffice/ProductAttachments/Control_200_Brochure_051309_lowres.pdf JBL 200 series Technical Specifications]
<br>
<br>
[ftp://ftp.dcaudiovisuel.com/dca/Electrovoice/electrovoice_s200_datasheet.pdf S-200 Datasheet]
Powered by 1 Clyde CX-A6
<br>
<br>
Sends 19, 20 on XLR Patchbay.
==Amplification==
'''D&b D6'''
[[Image:dbd6.jpg]] '''10 in Main control room amp rack, 2 in portable rack with Midas Stage box'''
<br>
<br>
Full Range <br>
Frequency response (-3dB) 80-18000Hz<br>
Power Handeling: 300W cont. / 600W peak <br>
Sensitivity (1w/1m) 100dB <br>
HF Transducer: 1” driver <br>
LF Transducer: EVM 12S 12” <br>
Dimensions HxWxD: 61x38x22 cm <br>
Weight: 16,3kg <br>
Impedance: 8Ω <br>
Input connections 2x Neutrik XLR3
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/D6_Hardware_Manual_1.7EN.PDF D6 Hardware Manual]
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/D6_Software_Manual_1.2EN.PDF D6 Software Manual]
<br>
[[Image:d6_data.jpg]]


'''EV SH-1512'''
'''D&b D12'''


[[Image:sh1512.jpg]]'''2 in stock'''
[[Image:d12.jpg]] '''1 in Main control room amp rack
<br>
<br>
<br>
<br>
[http://archives.telex.com/archives/EV/Speakers/EDS/SH-1512%20EDS.pdf SH-1512 Datasheet]
[http://www.dbaudio.com/fileadmin/docbase/D12_Hardware_Manual_4.7EN.PDF D12 Hardware Manual]
<br>
<br>
[http://www.dbaudio.com/fileadmin/docbase/D12_Software_Manual_5.4EN.PDF D12 Software Manual]
<br>
<br>
[[Image:d12_data.jpg]]


'''Tannoy T40r Subs'''
'''Crown K2'''


[[Image:t40sub.jpg]] '''2 in stock'''
[[File:Crown_K2.png]] '''1 in Main control room amp rack'''
<br>
<br>
[http://www.crownaudio.com/media/pdf/legacy/102010.pdf K2 Operations Manual]
<br>
<br>
[http://media.musicalplanet.com/pdf/TNY316.PDF T40 Sub Data Sheet]
<br><br>
Frequency Response.....36Hz-160Hz +/-3dB<br>
Recommended Amplifier Power.....300 to 600W RMS (8 Ohm)<br>
Power Handling.....300W (Average)...600W (Programme)...1200W (Peak - 10mS)<br>
Nominal Impedance.....8 Ohms<br>
Sensitivity.....96dB / 1W @ 1m<br>
Distortion.....Not Specified<br>
Dispersion.....Omnidirectional<br>
Crossover Frequency.....Recommended 100Hz - 175Hz<br>
Drive Unit.....381mm (15") Tannoy bass driver<br>
Cabinet Volume.....100 litre vented<br>
Cabinet Construction.....15mm birch plywood<br>
Cabinet Finish.....Textured black / grey paint<br>
Dimensions (HxWxD).....665mm (26.2") x 440mm (17.3") x 435mm (17.1")<br>
Weight.....27 Kgs (59.4 lbs)<br>
<br>
<br>
'''Cloud CX-A6'''
[[File:Cloud CX-A6.jpg]] '''1 in Main control room amp rack'''
<br>
[http://www.cloud.co.uk/files/documents/mcampdat.pdf Cloud CX-A6 Technical Specifications]


==Control==
'''Surface'''
'''DiGiCo SD12 Worksurface'''<br> '''SD12 surface - 24+2 faders, 2 DMI slots, 24ch USB Audio I/O, 2
BNC MADI, 2 PSU, 16 GPIO, dust cover
72 mono input channels, 36 mono output busses
2 mono or stereo solo busses. LR or LCR master buss
12 x 8 matrix, 12 CG/VCA, 12 FX, 16 x 32 band graphic eq’s
Local I/O 8 x Mic/Line inputs, 8 x Line outputs, 8 x AES I/O
mono stream Dimensions; 1124 (w) x 795 (d) x 389 (h) mm
Weight; 42Kg'''
<br> '''DiGiCo SD12 Theatre Specific Application Software'''
<br>


'''Tortoise Shell Speakers'''
[[File:Digico-SD12.jpg]]<br>[[File:Digico-SD12-Rear-2.jpg]]
<br>
<br>
'''I/O'''
<br>
'''3 x DiGiCo DQ Racks'''<br>'''6u Rackframe, 2 PSU's, 2 RJ45 Dante, 48 mic/line in,
20 line out, up to an additional 4 line or 8 AES out'''<br>
[[File:DQ-Back-1.jpg]]
<br>
'''All Dante Enabled'''
<br>
<br>


[[Image:tortoise.jpg]]'''2 in stock'''
'''Monitoring'''
<br>
<br>
<br>
<br>
Ultra Full Range: (2Hz-40kHz)<br>
'''Fostex 6301B'''
Dispersion: 360 degrees
<br>  
Power Handeling: 50,000W cont. / 80,000W peak <br>
[[File:fostex.jpg]]'''2 Fostex 6301B permanently installed in the control room'''
Sensitivity (1w/1m) 100dB, very sensitive to lettuce <br>
<br>
HF Transducer: 1” driver <br>
[http://www.fostexinternational.com/docs/downloads/pdfs/6301b_owners_manual.pdf Fostex 6301B Overview]
LF Transducer: 18” <br>
<br>  
Dimensions HxWxD: 55x25x31 cm <br>
Weight: 25kg<br>
Impedance: 64Ω <br>
Input connections 2x Neutrik XLR3<br><br>
Ask Senga for further details...
<br>
<br>


'''Tannoy Leopard Subs'''
==Playback/Recording==


[[Image:tannoyleopard.jpg]] '''2 in stock'''
 
'''DAW Hardware'''
<br>
<br>
'''1 Focusrite Scarlett 18i20'''
<br>
<br>
Scarlett 18i20 features a versatile 20 inputs and 20 outputs, including a complement of eight Focusrite mic preamps guaranteed to get the best out of any microphone, with minimal noise and distortion even at high gain. Two mic/line/instrument inputs are accessed via the front panel, which also provides two independent headphone monitor outputs.


== Control ==
This interface is best used with Safire Mix Control which can be downloaded [http://global.focusrite.com/firewire-audio-interfaces/saffire-pro-40/downloads here.]
 
<br>

Latest revision as of 08:44, 24 May 2023

There is a world-class sound system in the Ath. This is made op of D&b Audiotechnik Amps and Speakers and a Midas Pro Series Console. The system is mostly hard-wired and does not move from its set position. There is the potential for up to 10 monitor mixes to stage and the orchestra pit on the house system.

Main House Rig

D&b E12

2 Main stalls speakers, one positioned in landscape aspect either side of stage

Powered by 1 D&b D6 Amplifier.
Sends 1 & 2 on XLR Patchbay.

E12 Manual
The E-Series




D&b E8

4 Upper floors speakers, one positioned at either side of Proscenium in portrait aspect

Powered by 2 D&b D6 Amplifiers.
Sends 3 & 4 on XLR Patchbay.

E8 Manual
The E-Series



D&b Qi7

2 Lower section Centre-fill Mid-Tops placed in landscape aspect in Centre Cluster

Powered by 1 D&b D6 Amplifier.
Send 5 on XLR Patchbay.

Qi7 Manual
The Q-Series




D&b Qi-SUB/QiCSA-SUB

3 Upper section Centre-fill Subs in Cardioid Arrangement in Centre Cluster

Powered by 1 D&b D12 Amplifier.
Send 6 on XLR Patchbay.

Qi-SUB/QiCSA-SUB Manual
The Q-Series
TI 330 - Cardioid Sub Woofer Arrangement




D&b E0

4 Black Front Fills and 12 White Delay speakers spread over all floors on two seperate rings

Powered by 3 D&b D6 Amplifiers.
Sends 7, 8 & 9 on XLR Patchbay.

E0 Manual
The E-Series



Foldback

D&b E3

6 In stock - 2 with horizontal flying brackets, 4 with vertical flying brackets

E3 Manual
The E-Series



Additional Speakers

JBL Control 226C/T

18 permanently installed in the auditorium
JBL 200 series Technical Specifications
Powered by 1 Clyde CX-A6
Sends 19, 20 on XLR Patchbay.

Amplification

D&b D6

10 in Main control room amp rack, 2 in portable rack with Midas Stage box

D6 Hardware Manual
D6 Software Manual

D&b D12

1 in Main control room amp rack

D12 Hardware Manual
D12 Software Manual

Crown K2

1 in Main control room amp rack
K2 Operations Manual

Cloud CX-A6

1 in Main control room amp rack
Cloud CX-A6 Technical Specifications

Control

Surface DiGiCo SD12 Worksurface
SD12 surface - 24+2 faders, 2 DMI slots, 24ch USB Audio I/O, 2 BNC MADI, 2 PSU, 16 GPIO, dust cover 72 mono input channels, 36 mono output busses 2 mono or stereo solo busses. LR or LCR master buss 12 x 8 matrix, 12 CG/VCA, 12 FX, 16 x 32 band graphic eq’s Local I/O 8 x Mic/Line inputs, 8 x Line outputs, 8 x AES I/O mono stream Dimensions; 1124 (w) x 795 (d) x 389 (h) mm Weight; 42Kg
DiGiCo SD12 Theatre Specific Application Software




I/O
3 x DiGiCo DQ Racks
6u Rackframe, 2 PSU's, 2 RJ45 Dante, 48 mic/line in, 20 line out, up to an additional 4 line or 8 AES out
All Dante Enabled

Monitoring

Fostex 6301B
2 Fostex 6301B permanently installed in the control room
Fostex 6301B Overview

Playback/Recording

DAW Hardware
1 Focusrite Scarlett 18i20
Scarlett 18i20 features a versatile 20 inputs and 20 outputs, including a complement of eight Focusrite mic preamps guaranteed to get the best out of any microphone, with minimal noise and distortion even at high gain. Two mic/line/instrument inputs are accessed via the front panel, which also provides two independent headphone monitor outputs.

This interface is best used with Safire Mix Control which can be downloaded here.



Retrieved from "https://paperclip.rcs.ac.uk/index.php?title=New_Athenaeum_Theatre_Sound&oldid=29576"