Stage Automation: Difference between revisions

Latest revision as of 10:58, 23 May 2023

@@ Line 1: / Line 1: @@
-'''Stage Technologies Automation User Generated Handbook'''
+[[Category:Stage Automation]]
-== Hardware ==
+[[Stage Automation Level 1]]
-'''moving the winches'''
+[[Stage Automation Level 2]]
-If the cables need to be unplugged, in most cases they will, make sure that the e-stop is pressed on the MCC cabinet before unplugging and the sequence reversed after the motors are in position. This makes the drive reset function within Chameleon much simpler.
+[[Setting Initial Limits on the Winch]]
-== Software ==
+[[eChameleon]]
-'''Drive Reset'''
+[[Automated Trucks 2013]]
-If the encoder cables has been unplugged for moving a winch the drive must be reset within Chameleon. Either Query the axis via Axis . Query and execute the reset option under diagnostics or call up the "drive in error" from the Devices menue and execute the drive reset from there. NOTE: The axis must be live on a playback for this to work
+[[Automation Class 2014]]
+[[Control Cabinet Reference]]
+[[Big Tow 200 Winches]]
+[[iQ]]