Kidnapped

From paperclip
Revision as of 22:46, 8 November 2015 by Rboyd (talk | contribs)
Jump to navigation Jump to search


Kidnapped
Performance Time
Performance Date November 3rd, 4th, 5th, 6th
Performance Time 7:15pm (3,4,5,6)
2:00pm (5, 6)
Stats
Venue New Athenaeum
Creative Team
Director Graham McLaren
Assistant Director Fiona Mackinnon
Designer Graham McLaren
Assistant Designer Catherine McLauchlan
LX Designer Alex Kilgour
Sound Designer Hannah Allan
Production Team
Production Manager Sandy McRobbie
Stage Manager Judy Stewart
DSM Samantha Wright
ASM Ryan Davy, Ben Leach
TSM Daniel Thompson
DTSM & Automation Programmer Rory Boyd
Sound Operator Chariya Glasse-Davies
PLX Stephen Cunningham


Kidnapped is a production done in partnership with the National Theatre of Scotland. It is a new adaptation of Robert Louis Stevenson's novel of the same name. Director and designer Graham McLaren stated that his goal was to have a 60 minute show of non-stop action and minimal dialogue. The cast of BA Acting 3 students played a large part in helping to develop and cut the script.


Cast List

David: Rebekah Lumsden/Sarah Miele

Ebenezer: Nicholas Barton-Wines

Hoseason: Shane Murphy/Bobby Ginty

Riach: Thierry Mabonga

Alan: Jacob Vigeland/Laurie Scott

Peter: Emilie Konradsen

Maclean: Charlotte Driessler

Red Fox: Alex Kampfer

James: Tim Pollack

Cluny: Jamie Hughes

Rankeillor: Stephen Moseley


Props

--Paperback copies of "Kidnapped" x12 (Sourced from several Glasgow and Edinburgh bookstores as well as borrowed personal copies)

--Industrial lantern torches x6 (Purchased from Amazon)

--Nerf guns x6 (Borrowed from students/purchased at Hamley's)

--Disk firing guns x2 (Purchased at Hamley's)


Production Details

The set consists of a large cube of truss from the National Theatre of Scotland. From the truss hang several harnesses and pulley systems creating an elaborate flying system operated by crew members Stuart Leech, Calum Paterson, Ross McCrone, and overseen by TSMs Daniel Thompson and Rory Boyd. An external training team from Aerial Edge was brought in to train the crew on the safe and proper use of the counterweight flying system. For the actual performances, the actors acted as each other's counterweights and the crew were trained in emergency rescue operations but no longer acted as bases.


Sound Design

The sound system for Kidnapped was made up of two PA’s, one for music and one for vocals.

The vocal PA was made of two d&b C6s on the downstage truss legs, two d&b E9s and two d&b C7-SUBS behind the upstage truss legs. The music PA was made of four d&b Q7s on a truss bar above the platform, two d&b C6s behind the audience of the fly cages and two stacks of QSUBS under the platform.

File:Kidnapped Final Plan.pdf

The sound, light and automation control positions for Kidnapped were on the platform behind the PA, this caused difficulties with mixing the show as it was difficult for the operator to hear. We added a small FOH monitor next to the control position to overcome these issues.

Fourteen Countryman H6 radio mics were used in this production which caused difficulties with EQ-ing and creating a natural sound due to the show being a somewhat "in the round" piece.

One mic had constant drop outs during the wall scene of Kidnapped. This was due to an RF issue not reaching the cast member's pack from where the aerial position was. After repositioning the panels, issues ceased.

Automation

This production used Automation very heavily.

Both Set pieces and performers were flown using the Winches. The main set piece was 2m x 1.3m door, that was clipped onto a winch at each corner.

This 'door' was then flown up to form a boat. It supported the weight of up to 5 performers at one time, all of which were not clipped onto a safety. It did however feature large handles all around the sides of the top surface.

Please see the Automation plot below: