Peter Pan: Difference between revisions

From paperclip
Jump to navigation Jump to search
Ahamilton (talk | contribs)
No edit summary
Ahamilton (talk | contribs)
Line 152: Line 152:
Sound Technician - [[Mark Sillett]]
Sound Technician - [[Mark Sillett]]


===Composition===
===System===
Peter Pan was the first show to use the Shure Axient Digital Kit. It had 22 ways of Radio Frequencies which included 20 DPA 4060's used with AD1 packs for cast microphones and 2 re-terminated DPA 4060's with UR1's for the roaming instruments, which were Cello, Guitar, Accordion, Flute, Piccolo, Saxophone and Banjo. 
 
Due to the complexity of scene changes and vast amount of moving set pieces, the majority of the sound equipment was housed below stage level in the pit. This allowed for quick fault finding and it provided a secure location to store equipment throughout the run. One member of the sound team was always present during performances and tech period in the event that something should go wrong. This made it as easy as running two lines of Cat 5E to FOH. Equipment in the pit included;
 
Midas DL251 x2
Midas DL371 x1
Shure Axient Rack w/ x5 AD4Q, Antenna Distro, x3 Battery Chargers
Redundant Qlab w/ MacBook Pro, Focusrite Scarlett 18i8
Motorola GP340 x12
Motorola Impres Charging Station x2
Wireless Comms Charging Station
Cable Stock
 
To combat the loss of low end frequency in the Athenaeum stalls, one Meyer 600HP Subwoofer was hired from a local company and placed under the fore-stage curve. This fitted to the exact measurements on the height of the fore stage and provided even coverage to the stalls which prevented overpowering the circles with the centre cluster.
 
===Redundant Qlab===
Peter Pan Qlab stack had over 800 individual elements throughout the whole show which meant in the event of a failure, there needed to be a redundant system in place. For this we used a replica qlab setup in the pit which had the exact same sound card and qlab file running. Both the main machine and backup were networked using a static IP and secure passcode within Qlab network. Within the main machine show file, along with every group, there was an OSC network command sent out triggering the cue on the backup machine. In the event of a system failure FOH, Sound No.1 would simply have to navigate to Pop Group 'Qlab Redundant' on the Pro 6, which carried through every scene and unmute the group, where levels had been set beforehand, leading to a fairly seamless transition, giving time for the Sound 1 to troubleshoot FOH machine.
===Communications System===
With the amount of performer flying and moving set pieces, the show required a robust communications system. For this we used the in house Tech Pro master station allowing all of the wired comms headsets to simultaneously talk to each other across Ring A and B. We then split a signal out of Ring A, down the GPO patch to the SL wing where we split the signal from two wire to four wire then into a Raycom Basestation which transmitted two ways over a frequency. 12 Motorola GP340 radios were programmed to transmit and receive on this frequency allowing crew members who needed to be able to roam to hear the full show call. The only complication using this, was that it was capped at two ways of communication, meaning that not everyone on radio's could respond at one time. For roles such as Stage Manager, Technical Stage Manager and Production Electrician, who need to be able to have separate two way communication at all time, we used 4 ways of BTR-80n Wireless Comms which was taken as a split out of the Raycom unit. All antennas were placed on the SL tormentors allowing full coverage of the stage, dock and stalls.
 
==Composition==
 
===The Team===
 
Composer - [[Graeme Law]]
 
Musical Director - [[Jacob Kerzner]]


===Paperwork===
===Paperwork===

Revision as of 21:19, 8 January 2019



Peter Pan
Production A3 Peter Pan
Performance Time
Performance Dates December 2018
General
Venue New Atheneum Theatre
Creative Team
Designer Robin Peoples
Lighting Designer Adlai Faigen
Sound Designer Allan Hamilton
Production Team
Production Manager Colin Bell
Stage Manager Poppy Apter
DSM Jessica Reid
ASM Zeni Bollok, Ross Hunter
TSM Regan Kelly
DTSM James Hamilton, Hiu Wing Wong
Head of Flys Lewis Douglas
PLX Jak Coventry
DPLX Joshua Brown
LX Programmer Karyn Wilson
LX Crew Hannah Henderson, Louise Chan, Noah Dates, Jessica McKay, Jamie Murray, Rhys Gaughan
PSE Neal Clark
TSM Crew Andrew Lynch, Julia Daniczek, Nicholas Ruebenacker, Darren Wilson, Corey Jackson, Rhys Gaughan
Sound Crew Mark Sillet, Conor Brown

Overview

Stage Management

Technical Stage Management

Ground plan

Fit Up

Performer Flying

Trap

Flys

Forestage Curve Installation

Genie Trap Installation

Running Lists

Lighting

The Team

Lighting Designer - Adlai Faigen

Production Electrician - Jak Coventry

Deputy Production Electrician - Joshua Brown

LX Programmer - Karyn Wilson

Lighting Crew - Hannah Henderson, Louise Chan, Noah Dates, Jessica McKay, Jamie Murray, Rhys Gaughan

Wireless Kits

Lighting Plans

Sound

The Team

Sound Designer - Allan Hamilton

Production Sound Engineer - Neal Clark

Sound No.2 - Conor Brown

Sound Technician - Mark Sillett

System

Peter Pan was the first show to use the Shure Axient Digital Kit. It had 22 ways of Radio Frequencies which included 20 DPA 4060's used with AD1 packs for cast microphones and 2 re-terminated DPA 4060's with UR1's for the roaming instruments, which were Cello, Guitar, Accordion, Flute, Piccolo, Saxophone and Banjo.

Due to the complexity of scene changes and vast amount of moving set pieces, the majority of the sound equipment was housed below stage level in the pit. This allowed for quick fault finding and it provided a secure location to store equipment throughout the run. One member of the sound team was always present during performances and tech period in the event that something should go wrong. This made it as easy as running two lines of Cat 5E to FOH. Equipment in the pit included;

Midas DL251 x2 Midas DL371 x1 Shure Axient Rack w/ x5 AD4Q, Antenna Distro, x3 Battery Chargers Redundant Qlab w/ MacBook Pro, Focusrite Scarlett 18i8 Motorola GP340 x12 Motorola Impres Charging Station x2 Wireless Comms Charging Station Cable Stock

To combat the loss of low end frequency in the Athenaeum stalls, one Meyer 600HP Subwoofer was hired from a local company and placed under the fore-stage curve. This fitted to the exact measurements on the height of the fore stage and provided even coverage to the stalls which prevented overpowering the circles with the centre cluster.

Redundant Qlab

Peter Pan Qlab stack had over 800 individual elements throughout the whole show which meant in the event of a failure, there needed to be a redundant system in place. For this we used a replica qlab setup in the pit which had the exact same sound card and qlab file running. Both the main machine and backup were networked using a static IP and secure passcode within Qlab network. Within the main machine show file, along with every group, there was an OSC network command sent out triggering the cue on the backup machine. In the event of a system failure FOH, Sound No.1 would simply have to navigate to Pop Group 'Qlab Redundant' on the Pro 6, which carried through every scene and unmute the group, where levels had been set beforehand, leading to a fairly seamless transition, giving time for the Sound 1 to troubleshoot FOH machine.

Communications System

With the amount of performer flying and moving set pieces, the show required a robust communications system. For this we used the in house Tech Pro master station allowing all of the wired comms headsets to simultaneously talk to each other across Ring A and B. We then split a signal out of Ring A, down the GPO patch to the SL wing where we split the signal from two wire to four wire then into a Raycom Basestation which transmitted two ways over a frequency. 12 Motorola GP340 radios were programmed to transmit and receive on this frequency allowing crew members who needed to be able to roam to hear the full show call. The only complication using this, was that it was capped at two ways of communication, meaning that not everyone on radio's could respond at one time. For roles such as Stage Manager, Technical Stage Manager and Production Electrician, who need to be able to have separate two way communication at all time, we used 4 ways of BTR-80n Wireless Comms which was taken as a split out of the Raycom unit. All antennas were placed on the SL tormentors allowing full coverage of the stage, dock and stalls.

Composition

The Team

Composer - Graeme Law

Musical Director - Jacob Kerzner

Paperwork

Photos