All lanterns are supplied in working order with hook clamps, wing nuts and safety bonds. Please ensure that at the end of the production all lanterns are restored to the condition in which they were received and report any and all faults or damages to the Venues Team.
All lanterns have a safety bond attached to the lantern and a bonded colour frame and/or barndoor, if these are found to be removed the lantern will be removed from service for the duration of the show.
ETC S4 jr Zoom 575w 25°/50°
All S4's have a safety bond attached
13 Complete with bonded colour frames
3 with missing colour frames
5 with broken/damaged colour frames
Selecon Acclaim F 650w 6°/60°
All Acclaim F's have a safety bond attached
6 complete with Barndoors and Colour Frame
1 with missing barn doors
14 with missing colour frames
3 with damaged barn doors
24 in stock
Selecon Acclaim PC 650w 4°/64°
All Acclaim PC's have a safety bond attached
5 complete with Barndoors and Colour Frame
4 with missing barndoors.
14 missing colour frames.
3 with broken/damaged colour frames.
26 in stock
ETC S4 PAR 750w
12 S4 PAR EA - Weighs 3.4kg
10 complete with Colour Frame
1 with missing Colour Frame.
1 S4 PARNel - Weighs 3.6kg
1 complete with Colour Frame
Strand Coda 4 500w
Robe DL4F LED 450W
RGBW LED color engine 15-50 degree zoom weight: 20.8 KG (45 lBs)
Hazers and Smoke Machines
A Chauvet AmHaze hazer is available to be booked from the venues dept - https://www.chauvetprofessional.com/products/amhaze-whisper/
Look Solutions Viper 2.6 Fog Machine
The Viper 2.6 is a 230 Volt, 2600 Watt high performance fog machine. The output is twice as powerful as the Viper NT. It has a built-in timer and DMX. Heat-up time is approximately 7 minutes. Pump can be adjusted in increments of 1%-99%. Continuous output when pump is set <50% and settings above 50% will yield a 40 second blast.
2 in stock shared with all venues
ETC Eos Ti With one Multi Touch Displays
•10,000 channels (devices)
•Dedicated master playback fader pair
•10 definable motorized faders, with 30 pages of control
•20 user-definable buttons
•999 cue lists
•200 active playbacks
•Dedicated pan/tilt encoders, four pageable encoders
•Two articulating 17” LCD multitouch displays
•Supports three external DVI/SVGA monitors; can be single- or multitouch
•High-density live and blind displays
•Virtual Media Server Control with Stock Content (user images may be imported)
•Device discovery and troubleshooting via RDM
•ETC Sensor® CEM+, CEM3™ and FDX dimmer feedback and controls
•User-definable channel and control layouts
•ETCNet3™ (ACN based), ETCNet2™, Artnet and Avab® UPD protocol output
•Integrated keyboard drawer with USB ports
•Two individually configurable network ports
•Multiple MIDI and SMPTE Inputs •Client/server networking and synchronized backup •Client and Offline programming on PC (Windows 7 or XP) and native on Macintosh (Intel only, OS X) •Data-laundering from Obsession™, Express™, Expression®, Emphasis®, Congo®, Transtechnik NT, Avab VLC and Strand 500/300 series show files via ASCII •12 discrete online users with partitioned control •Two 802.af-compliant PSE Ethernet ports, individually configurable
Houselights are addressed to dimmer 126. There is also a chilli system in place. Workers are controlled from the DSR Breaker board.
Colouring Convention: R E D 3 letters = 3 meters etc.
2m WHITE (2 stripes)
Dimmers and Hot Power
The Chandler is equipped with 72 ways of Zero 88 Chilli Pro 24-10i dimmers. Each dimmer channel has a 10Amp capacity. There is a plan below showing the locations of these dimmers. The Chandler also has 8 ways of DMX switched hot power. Again these are marked on the plan. An additional 6 dimmer outlets are located at the stage floor level towards the dock doors. These are numbered 57 through 62. A 6 way 15amp outlet panel is located above the vestibule exit door beside the Dock Door entrance. This has a permanent link of socapex cable to the the floor sockets numbered 57 through 62. The socapex cable will require a 15a plug spider if the panel outside the venue need to be utilised.
The Chandler has pre allocated cross bars primarily to act as lighting rigging positions but to be shared for the rigging of suspended set items etc. The default layout is shown below: